P FULL HD STYLISH & SLEEK 4 GB ID CARD CAMERA DVR IN INDIA

Technical Data 1)Main functions: recording video and audio at the same time, taking photo, recording audio alone, USB drive 2)Video format: AVI, resolution 3)Picture format: JPEG, resolution 4)Audio format: WAV 5)Internal memory: 4GB 6)USB: 2.0(Hs) 7)Charging time: 2-3 hour 8)Built Li-chargeable battery: can work for 2 hours continuously 9)Operation systems: Windows ME// XP/ Vista no need driver   Operation Directions Switch On Press ON/OFF button once, yellow light keeps on which indicates it enters into standby mode.   Recording Video And Audio Under standby mode, press ON/OFF button once, the yellow light blinks 3 times, then it turns off, the camera starts to record video and audio. Press ON/OFF once again, the yellow light keeps on after 2 seconds which indicates the video file is saved automatically and the camera back to standby mode.   Take Photo Under standby mode, press photo/ audio button once, yellow light blinks once which indicates one photo is taken and back to standby mode.   Record Audio Alone Under standby mode, press photo/ audio button for some seconds ， yellow light blinks which indicates it starts to record audio. Press the button again for 2 seconds, the yellow light keeps on which indicates the audio file is saved automatically and the camera back to standby mode.   Switch Off Under any mode, press the ON/OFF button for 2 seconds, the light turn off which indicates the camera is shut down or insert a clip into “reset” hole to shut down the camera. Reset Under incorrect operation or a certain reason, the device may stop working, at this time, insert the clip into the reset hole to reset, and then the device is at power off mode.   Charging If the yellow light flash 3 times and turn off, it indicates low power. Connect the camera to computer via USB cable to charge the camera, the yellow light keeps on which indicates the camera is being charged. Once the camera is full charged, the yellow light turns off. Please remove the camera from computer after it is full charged.   Playback Video Connect the camera to your computer via USB cable to play back video.     Setting Time When using the device for the first time or the time is incorrect, you can reset the time through the following way: 1)Connect the camera with computer 2)Create a new “ TIME.TXT” file 3)Edit time as format: