Amplifier dpa low

Power Output: 75W Max., 50W RMS at 10% THD, 45W RMS at 5% THD Input Channels: 3×Mic. 0.6mV/4.7k, 1×Aux 100mV/330k Frequency Response: Hz ±3dB Signal to Noise Ratio: 55dB Tone Controls Bass: ±10dB at 100Hz Treble: ±10dB at 10kHz Outputs Line: 400mV/3.5k Speaker Outputs: V Digital Player: MP3 Player with USB reader Power Supply: AC: V Hz, DC: V Car Battery Dimensions: W305 × H120 × D305 mm Weight: 7.0kg

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Amplifier Kit with Main heat sink and Power Supply Kit): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply Transformer required: Volt 5 Amps- NOT INCLUDED) With Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

specification 1. Average Power Output/CH into 4 Ohms, 4 Channels Driven /10Hz~40kHz, 0.5% THD 85W X 4 or 170W X 2Ch /1kHz, 10% THD 250W X 4Ch or 500W X 2Ch (Total Harmonic Distortion (THD) Amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 1% is inaudible.) 2. Low Pass Filter (VARIABLE) 40Hz ~ 150kHz 3. High Pass Filter (VARIABLE) 80Hz ~ 1.2kHz 4. Output of Bridged (BTL) Operation into 4 Ohms /1kHz, 1% THD Watts 5. Frequency Response (-1dB) 10Hz ~ 40kHz 6. Signal to Noise Ratio ("A" WTD) >100dB 7. Input Sensitivity 100mV ~3V 8. Input Impedance 22k Ohms 9. Operation Voltage (Negative Ground) DC 12V 10. Speaker Impedance / Stereo Driven 4 Ohms 11. Fuse Rating 40A X 1 12. Dimension (WxHxD)mm 260X58X320 Weight 3.2KG

FEATURES DPA-770 is a PA amplifier with an inbuilt MP3 Digital Player, making it a versatile multi-application music center. The Digital Player accepts USB drives, and reproduces clear, high quality music. A remote control is provided for controlling the functions of the Digital Player from a distance. This, combined with 4 microphone inputs, 1 Aux input, and provision for multiple speaker connections makes this ideally suitable for a variety of music programmes and public address applications.4 Mic & 1 Aux Input.Built-in MP3 player with USB reader and remote control.Line Output for connecting to a Booster Amplifier.Active Bass & Treble controls.Instant transfer to DC Power (Car Battery) if AC power fails.5 LED array for output level monitoring. SPECIFICATIONS    Power Output 100W Max., 75W RMS at 10% THD, 70W RMS at 5% THD  Input Channels 4×Mic. 0.6mV/4.7k, 1×Aux 100mV/330k  Frequency Response Hz ±3dB  Signal to Noise Ratio 55dB  Tone Controls Bass: -10dB, +7dB at 100Hz Treble: -10dB, +7dB at 10kHz  Outputs Line: 1V/3.5k  Speaker Outputs V  Digital Player MP3 Player with USB reader  Power Supply AC: V Hz, DC: V Car Battery  Dimensions W385 × H130 × D310 mm  Weight 9.4kg  

DPA-370 is PA Amplifier with inbuilt MP3 Digital Player. Built with a aesthetically designed plastic front panel, it is an elegant, state-of-the-art product.The Digital Player plays back clear, high quality Mp3 music from an USB drive. A remote control is provided for easily operating the Digital Player from a distance. This, combined with 2 microphone inputs, 1 Aux input and provision for multiple speaker connection makes this product ideally suitable for a variety of music programmes and public address application.2 Mic & 1 Aux Input.Built-in MP3 player with USB reader and remote control.Line Output for connecting to a Booster Amplifier.Tone for cutting excessive high frequencies.Instant transfer to DC Power (Car Battery) ifAC power fails.Monitor LED for output monitoring SPECIFICATIONS    Power Output 35W Max., 28W RMS at 10% THD, 25W RMS at 5% THD  Input Channels 2 × Mic. 0.5mV/2.5k, 1 × Aux 50mV/330k  Frequency Response Hz ±3dB  Signal to Noise Ratio 58dB  Tone Controls Tone: -10dB at 10kHz  Line Outputs 250mV/3.5k  Speaker Outputs V  Digital Player MP3 Player with USB reader  Power Supply AC: V Hz, DC: V Car Battery  Dimensions W230×H95×D260 mm  Weight 4.5kg

PANDA AUDIO KV-707-A  Integrated Stereo Amplifier Highlights: Discrete Circuitry for Low distortion and Low Noise.                                                                                                       Self  Balancing Circuit for DC and Short Circuit Protection                                                                                           High Efficiency with Class AB Operation                                                                                                                                      Complementary High Current Linear Output Stage                                                                                                                      Microphone Input with Sing Along Facility PANDA AUDIO KV-707-A Integrated Stereo Amplifier delivers authentic sound re-production with low distortion and high efficiency, by employing latest discrete amplifier circuit technology. The Excellent  sonic performance is a result of two separate amplifier modules with fast recovery rectifiers and large smoothing capacitors along with high current torroidal transformer, coupled to a low noise pre-amplifier with baxandall tone controls. High Current Full Complementary Bi-Polar Junction transistor configured

The FiiO QOGIR (E9K) desktop headphone amplifier offers truly stunning audio performance and versatility to headphone audio enthusiasts. Its sleek and modern appearance belies the engineering marvel within. While maintaining exceptionally low noise and distortion, the QOGIR's strong power and high current output design is capable of driving the most demanding headphones up to 600Ω, while rendering music with excellent dynamics and clarity. The QOGIR serves as a dock for the E17 USB DAC-AMP devices. When combined, the QOGIR and E17 become seamless high fidelity audio interface for any computer, bypassing noisy internal sound cards. With both a fixed and a volume controlled line level output, the QOGIR works well as a pre-amp. As a successor to the E9, the QOGIR has the following improvements: - Synchronized power on/off with FiiO E17 - Switch-selectable dock or AUX-in playback - Full size RCA connectors for all rear input/outputs Features - TI TPA current feedback power amp with low noise, distortion and high switching rate - Soft on/off with sealed relay protects power amplifier output - Smooth and low noise ALPS sealed potentiometer for volume control - Audio buffers using ultra-low distortion and low noise OPA op amps - Dock connector for E17 USB DAC-AMP - Standard 10dB and 18dB High Gain - Volume controlled and fixed level RCA outputs Specifications - Power: 900mW (mW (300Ω) - Impedance Range:Ω - SNR: >100dB (A weight) - Distortion: -="" frequency="" response:="" 20hz~20khz  - Line Out: 2V rms - Pre Out: 0~6V rms - Power: DC15V/ 1.5A - Size: mm - Weight: 440g What's Included: - FiiO QOGIR (E9K) - AC Adapter - USB Cable - User's Manual > Refund Policy When a refund is possible: - If there exists a manufacturing defect

Item: LMTA Audio amplifier  Quantity: 1 Condition: New Shipping Price: Rs. 50 for each & Rs 5/-  additional item.   Shipping: All over India via Speedpost within same day or 2.  LM Overture™ Audio Power Amplifier Series Stereo 60W, Mono 120W Audio Power Amplifier with Mute. FEATURES DESCRIPTION The LM is a stereo audio amplifier capable of 23• SPiKe Protection typically delivering 60W per channel of continuous • Low External Component Count average output power into an 8Ω load with less than • Quiet Fade-In/Out Mute Mode 0.5% THD+N from 20Hz - 20kHz. • Wide Supply Range: 20V - 84V The LM is fully protected utilizing Texas • Signal-to-Noise Ratio ≥ 97dB (ref. to PO = 1W) Instruments' Self Peak Instantaneous Temperature (°Ke) (SPiKeTM) protection circuitry. SPiKe provides a APPLICATIONS dynamically optimized Safe Operating Area (SOA). SPiKe protection completely safeguards the • Audio Amplifier for Component Stereo LM's outputs against over-voltage, under- • Audio Amplifier for Compact Stereo voltage, overloads, shorts to the supplies or GND, • Audio Amplifier for Self-Powered Speakers thermal runaway and instantaneous temperature peaks. The advanced protection features of the • Audio Amplifier for High-End and HD TVs LM places it

12W Hi-Fi Audio Amplifier kit built around TDA IC, intended to be used as a low frequency class AB amplifier. Power supply input 24 VDC Output: 12 W, 4 Ohm Input resistance 5 MOhm Very low harmonic distortion (0.5%) and cross-over distortion IC built

TDAW Audio Amplifier Kit is a Low Frequency Class AB amplifier. Power supply upto 18 VDC Output power 12 W @ 4 Ohm, 8 W @ 8 Ohm TDA provides high output current Has very low harmonic and cross-over distortion Short circuit protection/Thermal shutdown system

Pro-Ject Phono-Box "S" MM/MC Phono Pre-Amplifier Audiophile, Versatile & Affordable 3 YEAR COMPANY WARRANTY - FREE SHIPPING* - EMI OPTION Top-notch performance and flexibility Pro-Ject's Phono Box "S" phono preamp serves up the warm, relaxed sound that vinyl is famous for while offering unique performance enhancements rarely seen at this price. Its carefully selected amplifier modules and audiophile-grade components make your treasured record collection shine. And no matter what kind of phono cartridge you mount on your turntable, this versatile preamp gives you a wide range of input settings to optimize its performance. A switchable subsonic filter protects your amplifier and speakers from power-wasting low-frequency rumble below 20Hz. The Phono Box S phono preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination. Product Overview: Phono Box S: audiophile, versatile & affordable!  This new phono preamplifier offers unrivaled performance and unique flexibility, which never before was available at this price!  Sonic quality of Phono Box S is extremely impressive, a big improvement and a perfect upgrade for most analogue hifi system.  With a wide range of setting parameters, it can meet the needs of almost any phono cartridge on the market. A switchable subsonic filter prevents your amplifier and speakers of ultra low rumble below 20Hz. Carefully selected amplifier modules and audiophile-grade polypropylene capacitors make it possible to enjoy your valuable vinyl collection like never before!  The class-leading music reproduction of Phono Box S gives pure dynamics, full transparency, analogue warmth, bass texture, detail resolution and purity of all audible frequencies. >>> A new „Best buy“ classic ! Product Highlights & Specification: Compatible with moving magnet and moving coil phono cartridges Audiophile-grade polypropylene WIMA capacitors

POWERED MIXER (WITH AMPLIFIER) DFX PHONIC POWER POD CHANNEL 200 WATTS High-volume headphone output  Description: The Powerpod 820 is a 12-input 200 Watt powered mixer with four mono Mic/Line channels and two paired stereo inputs. The ultra low noise pre-amps and 75 Hz (18 dB/oct.) low-cut filters ensure high fidelity sound and elimination of unwanted sounds like stage rumble, P-pops, wind noise and low frequency recording studio room resonance. A 3-band EQ on every channel and onboard DFX, our 32-bit digital effects processor, with 16 preset programs and parameter control give you maximum control over your mix. Two AUX sends per channel and two stereo AUX returns mean that you can combine the Powerpod 820 with a variety of signal processors and other equipment. Monitoring the mix is easy with dual 10-segment LED level meters and high volume headphone output. The added feature of Mini Stereo I/O makes this mixers perfect for anyone connecting MP3, MD or computer audio or recording devices. The Powerpod 820 is ideal for project studios, restaurants and other applications that demand power

Mini Stereo Audio Amplifier kit is designed for portable radio players and other building block projects.  It  is based on TDA IC. Power supply: upto 12 VDC Output: 1 W, 8 Ohm for 12 VDC / 20 mW, 32 Ohm for 3 VDC Input resistance 100 KOhm Low crossover distortion, Low quiescent current Onboard PCB mount 3.5 mm stereo jack for audio-in Onboard Presets to adjust volume Terminal pins for connecting power supply and outputs Power-On LED indicator Four mounting holes of 3.2 mm each PCB dimensions 41 mm x 56 m m DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram  Note: KOTEQ offers custom design and modification services for most of our  products, please contact us  for  specific requirement.

TDAV - 100W DMOS AUDIO AMPLIFIER  WITH MUTE/ST-BY  VERY HIGH OPERATING VOLTAGE RANGE (±40V)  DMOS POWER STAGE HIGH OUTPUT POWER (UP TO 100W MUSIC POWER)  MUTING/STAND-BY FUNCTIONS NO SWITCH ON/OFF NOISE VERY LOW DISTORTION  VERY LOW NOISE  SHORT CIRCUIT PROTECTION  THERMAL SHUTDOWN   DESCRIPTION The TDA is a monolithic integrated circuit

The Best Deal on   !!!! New Cyber Sonic Hearing Enhancer Aid Machine Sound Amplifier:: Product Features:: CYBER SONIC HEARING AID WITH PROTECTIVE CASE FOR BETTER So small hides right behind ear Amplify sounds up to 40 decibels Auto noise reduction Low battery consumption Weight less than 10 grams 6 volume levels Can adjust to either ear Work with 3 button cell battery INCLUDED 3 attachments With keeping box:: In The Box:: 1 x Cyber Sonic Hearing enhancer Aid Machine Sound Amplifier 3 x button cell battery INCLUDED 3 x attachments 1 x keeping box Feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback. Your feedback is important for us to grow our business on , so please do leave feedback.. Contact Details Questions? If you have any query feel free to contact us on PH:  +91 OR e-mail us on . OR can contact me through by "Ask Seller A Question" Shipping Details We ship anywhere