Atmel controller

Atmel AttinyPU || 100% ORIGNAL || Arduino || Microcontroller || AVR || Atmel AttinyPU || 100% ORIGNAL || Arduino || Microcontroller || AVR || 100% Orignal Atmel Product and Rare Item on !! Must Buy! MCU, 8BIT, AVR, 8K FLASH, 14PDIP Controller Family/Series:AVR Tiny Core Size:8bit No. of I/O's:12 Supply Voltage Min:1.8V Supply Voltage Max:5.5V Digital IC Case Style:DIP No. of Pins:14 Program Memory Size:8KB EEPROM Memory Size:512Byte RAM Memory Size:512Byte CPU Speed:20MHz Peripherals:ADC, WDT, PWM Embedded Interface Type:SPI Operating Temperature Min:-40_C Operating Temperature Max:85_C SVHC:No SVHC (19-Dec-) No. of PWM Channels:2 No. of Timers:2 Operating Temperature Range:-40_C to +85_C Oscillator Type:External, Internal Supply Voltage Range:1.8V to 5.5V Payment:- We Only Aceept PaisaPay Payments.  You Can Pay Through Credit/Debit Cards, Net Banking. Shipping:- We Ship through DTDC / FedEx    If Nan of the above can ship the parcel to your region  then we will ship it through EMS SpeedPost. Contact Before Giving any Negative / Neutral Feedback. Giving any Negative/ Neutral Feedback will not Solve your Problem. Therefore Try to Contact before, on any of the Below Mentioned Contacts / Messages. For any Queries Contact:-      Or                                                                                       Phone:-               Support Email:-     

Atmel AttinyPU || 100% ORIGNAL || Arduino || Microcontroller || AVR || Atmel AttinyPU || 100% ORIGNAL || Arduino || Microcontroller || AVR || 100% Orignal Atmel Product and Rare Item on !! Must Buy! MCU, 8BIT, AVR, 8K FLASH, 14PDIP Controller Family/Series:AVR Tiny Core Size:8bit No. of I/O's:12 Supply Voltage Min:1.8V Supply Voltage Max:5.5V Digital IC Case Style:DIP No. of Pins:14 Program Memory Size:8KB EEPROM Memory Size:512Byte RAM Memory Size:512Byte CPU Speed:20MHz Peripherals:ADC, WDT, PWM Embedded Interface Type:SPI Operating Temperature Min:-40_C Operating Temperature Max:85_C SVHC:No SVHC (19-Dec-) No. of PWM Channels:2 No. of Timers:2 Operating Temperature Range:-40_C to +85_C Oscillator Type:External, Internal Supply Voltage Range:1.8V to 5.5V Do Provide a Feedback for us, As it would help us to give you our best Support and Service. Payment:- We Only Aceept PaisaPay Payments.  You Can Pay Through Credit/Debit Cards, Net Banking. Shipping:- We Ship through PowerShip So if your Region is not Covered under Powership, Sorry then we Can't Help You. Contact Before Giving any Negative / Neutral Feedback. Giving any Negative/ Neutral Feedback will not Solve your Problem. Therefore Try to Contact before, on any of the Below Mentioned Contacts / Messages. For any Queries Contact:-      Or                                                                                       Phone:-               Support Email:-     

Atmel AT89C51 24PI 1503 Micro controller in whole new condition and works in computer and other robotics devices.

Atmel ATMEGA8L - IC - 8PU 28-Pin 8MHz 8kb 8-bit Micro controller With 28 Pin Base 28-pin AVR Microcontroller Flash Program Memory: 8 kbytes EEPROM Data Memory: 512 bytes SRAM Data Memory: 1 kbytes I/O Pins: 23 Timers: Two 8-bit / One 16-bit A/D Converter: 10-bit Six Channel PWM: Three Channels RTC: Yes with Separate Oscillator MSSP: SPI and I²C Master and Slave Support USART: Yes External Oscillator: up to 8MHz About us Elemesh Tech Solutions Pvt. Ltd. is an Indian leading electronics, electrical, semiconductors & industrial supplier, currently having Sales & Service branches

5Pcs X New Original Atmel AT89S52 Microcontroller for Electronics Projects Most Widely Used Microcontroller Features • Compatible with MCS-51Products • 8K Bytes of In-System Programmable (ISP) Flash Memory – Endurance: Write/Erase Cycles • 4.0V to 5.5V Operating Range • Fully Static Operation: 0 Hz to 33 MHz • Three-level Program Memory Lock • 256 x 8-bit Internal RAM • 32 Programmable I/O Lines • Three 16-bit Timer/Counters • Eight Interrupt Sources • Full Duplex UART Serial Channel • Low-power Idle and Power-down Modes • Interrupt Recovery from Power-down Mode • Watchdog Timer • Dual Data Pointer • Power-off Flag • Fast Programming Time • Flexible ISP Programming (Byte and Page Mode) Package Includes: 5Pcs X New Original Atmel AT89S52 Micro controller  for Electronics Projects

AVR USB Programmer with case USBasp USBISP for ATMEL ATmega ATtiny microcontrollers. Painless AVR controller programming   Product Description: Main Features: ·         Brand new and high quality ·         Support for Linux, Mac OS X and Windows ·         5 KB/sec maximum write speed. ·         10 pin ISP interface. ·         Can be used with Khazama, AVRDUDE, PonyProg and other ·          Support for AVRDUDE from version 5.2 onwards   Supported devices: Mega Series: ATmega8 – ATmega48 – ATmega88 – ATmega168 – ATmega328 – ATmega103 – ATmega128 – ATmega – ATmega – ATmega16 – ATmega161 – ATmega162 – ATmega163 – ATmega164 – ATmega169 – ATmega – ATmega – ATmega32 – ATmega324 – ATmega329 – ATmega – ATmega64 – ATmega640 – ATmega644 – ATmega649 – ATmega – ATmega – ATmega Tiny Series ATtiny12 – ATtiny13 – ATtiny15 – ATtiny25 – ATtiny26 ATtiny45 – ATtiny85 – ATtiny   Classic Series AT90S – AT90S – AT90S – AT90S – AT90S AT90S – AT90S – AT90S AT90S  CAN Series AT90CAN128 PWM Series AT90PWM2 – AT90PWM3 Package includes: ·         1 x USB AVR Programmer with case ·         1 x 10-pin programming cable ·         A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Description The ArduPilot Mega 2.6 allows the user to turn any fixed, rotary wing or multirotor vehicle (especially multicopters and rovers) into a fully autonomous vehicle;capable of performing programmed GPS missions with waypoints1. 3.3V or 5.0V DC power supply 1. Arduino and ArduPilot Mega 2.5 Compatible! 2. Includes both right angle and straight pins for I/O, allowing user to customize as needed. 3, Onboard 4 MP Dataflash chip for automatic datalogging 4. Invensense/'s 6 DoF Accelerometer/Gyro MPU-6000. 5. Atmel/'s ATMEGA2560-16AU and ATMEGA32U-2 chips for processing and usb functions respectively. 6. Barometric pressure sensor upgraded to MS5611-01BA03, from measurement specialties Note1: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, Telemetry radio). It is not designed to power servos. Use your aircraft/'s own ESC/BEC for that. Note2: the use of electric power transfer: the need to JP1 jumper plug, power supply voltage does not exceed 5.6V, not less than five using UEBC: The UEBC power output cable plugged into the receiver INPUTS port, power supply is not higher than 5.2 is not lower than 4.8V Technical parameters:   Material: Plastic, Copper Main Color: Black Size: 70*44*13 mm Net weight: 38g Color: As shown

1 x UNO R3 MEGA328P ATMEGA16U2 board                       +  1 x USB cable  + 1 Plastic Carry Box  Product Description: 100% Brand New,  It is based on  MEGA328P Chip with 16U2 (UNO R3) feature,high quality clone. ATMEGA16U2 MEGA328P  UNO R3 Color of USB Cable: blue Transparent Plastic Carry Box   Package Include: 1 x UNO R3 MEGA328P ATMEGA16U2 board +  1 x USB cable + 1 Plastic Carry Box   Performance description: Digital I/O Digital input/output terminal, a total of 0 ~ 13. Analog I/O Analog input/output terminal, a total of 0 ~ 5. Support the ISP download function. The input voltage: when connected to the computer USB without external power supply, external power supply 5 v ~ 9 v dc voltage input. Output voltage: 5 V dc voltage output and 3.3 V dc voltage output. Using Atmel Atmega328 microprocessor controller. Payment Options:   Payment by PaisaPay only, Safest payment mode on .  Terms and Conditions: Orders are expected to be shipped within 2 days of receiving cleared payment  excluding holidays.. Shipping details will be emailed to you after the item is shipped and then you can track your order. No Address change entertained once the order is placed. Please refuse to accept the package from courier if its

1.      About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP  (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

9% Discount 31st March coupon code:  COUPONDUN9 1.     About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP  (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

FREE USB CABLE + & AVR USB ISP Programmer (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL     Product Overview   1.     About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

Description: The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins, 12 analog inputs, 4 UARTs, a 84 MHz clock, an USB OTG capable connection, 2 DAC, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The Arduino Due can be powered via the USB connector or with an external power supply. A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

PRODUCT DESCRIPTION The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU   It is the first Arduino board based on a 32-bit ARM core microcontroller.  It has 54 digital input/output pins, 12 analog inputs, 4 UARTs, a 84 MHz clock, an USB OTG capable connection, 2 DAC, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.  On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started.  The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.  The Arduino Due can be powered via the USB connector or with an external power supply.  A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. Technical specs AVR Arduino microcontroller Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-16V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Output Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Length mm Width 53.3 mm Weight 36 g

USBasp is an USB in-circuit burner/programmer for Atmel controllers. It’s supportable with all of the platforms like Windows, Linux and Mac OS X. This programmer doesn’t need any USB controller or component. Burning speed is up to 5KB/sec. (Image is only for indicative purpose, original product may differ slightly from the image)

         PRODUCT DESCRIPTION The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU   It is the first Arduino board based on a 32-bit ARM core microcontroller.  It has 54 digital input/output pins, 12 analog inputs, 4 UARTs, a 84 MHz clock, an USB OTG capable connection, 2 DAC, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.  On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started.  The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.  The Arduino Due can be powered via the USB connector or with an external power supply.  A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. Technical specs AVR Arduino microcontroller Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-16V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Output Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Length 101.52 mm Width 53.3 mm Weight 36 g

The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins, 12 analog inputs, 4 UARTs, a 84 MHz clock, an USB OTG capable connection, 2 DAC, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The Arduino Due can be powered via the USB connector or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector. The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.