Gps module neo

ublox/u-blox NEO-6M GPS module with antenna and build-in EEPROM This module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data. Battery included for RTC. Interface: RS232 TTL Power: 3-5V Baudrate default:bps EEPROM for saving the configuration data when powered off Specifications: Antenna size: 25 x 25mm Module size: 25 x 35mm Install hole dia.: 3mm Net weight:19g Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment.

GPS Module Ublox NEO-6M with Active Antenna Ublox NEO-6M GPS Module with active Antenna is a cost effective, high-performance u-blox 6 based NEO-6 series of GPS modules, that brings the high performance of the u-blox 6 positioning engine to the miniature NEO form factor. These receivers combine a high level of integration capability with flexible connectivity options

NEO-6M Ublox u-blox GPS Module with on-board compass HMCl (compass) (mag)   Specification: - tracking sensitivity:-161dBm - Capture sensitivity:-148dBm - cold start time:38s average - Warm start time:35s average - hot start time:1s average - Capture time:0.1s Average - Temperature:40   to +80 - wide power supply voltage:+3.5V~+5.5V   Ublox GPS Module V2.0     Description: - Main chip:U-BLOX NEO-6M - C/A code,MHz - Receiver Frequency:LMHz] - Locate performance - 2D:3m(Average) - 2D:2m(average),with WAAS - drifting - accuracy:1us - coordinate system:WGS-84 - max attitude height: - Max speed:515m/s - accerlaration:     Super Bright LED BlackPlane with Standard Mk style mounting holes 45mm X 45mm Blox Neo 6M Chipset bps (Default) Changed to bps ! Output GGA, GSA and RMC frames 1Hz (Default) Changed to 5Hz! Permanent Configuration Retention Cable included + Bigger battery + compass on board + 6 pin connector for EZ connect to MEGA BLACK + 4 pin connector for onlyGPS use + 4 pin connecton for compass only use + GPS "PCB HOOD" for More EMI/RFI Shielding     Packages Including:   1pcs * 6M GPS With Shell Note: Feel free to contact us or visit our website. Website is still a work

NEO-7M Ublox u-blox GPS Module with on-board compass HMC5883l (compass) (mag) 6M superset   Specification: - tracking sensitivity:-161dBm - Capture sensitivity:-148dBm - cold start time:38s average - Warm start time:35s average - hot start time:1s average - Capture time:0.1s Average - Temperature:40   to +80 - wide power supply voltage:+3.5V~+5.5V   Ublox GPS Module V2.0     Description: - Main chip:U-BLOX NEO-6M - C/A code,1.023MHz - Receiver Frequency:L1 [1575.42MHz] - Locate performance - 2D:3m(Average) - 2D:2m(average),with WAAS - drifting - accuracy:1us - coordinate system:WGS-84 - max attitude height:18000 - Max speed:515m/s - accerlaration:     Super Bright LED BlackPlane with Standard Mk style mounting holes 45mm X 45mm Blox Neo 6M Chipset 38400 bps (Default) Changed to 115200bps ! Output GGA, GSA and RMC frames 1Hz (Default) Changed to 5Hz! Permanent Configuration Retention Cable included + Bigger battery + compass on board + 6 pin connector for EZ connect to MEGA BLACK + 4 pin connector for onlyGPS use + 4 pin connecton for compass only use + GPS "PCB HOOD" for More EMI/RFI Shielding     Packages Including:   1pcs * 6M GPS With Shell Note: Feel free to contact us support@hoverbirds.in or visit our website. Website is still a work

ublox-7M Ublox u-blox GPS Module with on-board compass HMC5883l (compass) (mag)   Specification: - tracking sensitivity:-161dBm - Capture sensitivity:-148dBm - cold start time:38s average - Warm start time:35s average - hot start time:1s average - Capture time:0.1s Average - Temperature:40   to +80 - wide power supply voltage:+3.5V~+5.5V   Ublox GPS Module V2.0     Description: - Main chip:U-BLOX NEO-7M - C/A code,1.023MHz - Receiver Frequency:L1 [1575.42MHz] - Locate performance - 2D:3m(Average) - 2D:2m(average),with WAAS - drifting - accuracy:1us - coordinate system:WGS-84 - max attitude height:18000 - Max speed:515m/s - accerlaration:     Super Bright LED BlackPlane with Standard Mk style mounting holes 45mm X 45mm Blox Neo 6M Chipset 38400 bps (Default) Changed to 115200bps ! Output GGA, GSA and RMC frames 1Hz (Default) Changed to 5Hz! Permanent Configuration Retention Cable included + Bigger battery + compass on board + 6 pin connector for EZ connect to MEGA BLACK + 4 pin connector for onlyGPS use + 4 pin connecton for compass only use + GPS "PCB HOOD" for More EMI/RFI Shielding     Packages Including:   1pcs * 7M GPS With connector for AMP and Pixhawk. Note: Feel free to contact us support@hoverbirds.in or visit our website. Website is still a work

Ublox NEO6M V2 GPS Module For Arduino, Flight Controller etc FOR SALE BY AKSHAY STUDENT AT DELHI TECHNOLOGICAL UNIVERSITY BUY WITH CONFIDENCE PLEASE SEE MY OTHER ITEMS Fast Shipping on same working day !!! I AM ON HOLIDAY YOU CAN EXPECT QUICK RESPONSE UNLIKE OTHERS I program & test all devices before shipping     YOU GET THE ITEM AS SHOWN   The item is securely packedby bubble wrapping it for protection against damages.   I ship with DTDC / OVERNITE EXPRESS / SPEEDPOST. Please provide correct address and do not forget to provide us your correct contact number. Do not accept the package if the seal is tampered or broken. I would be very thankful if you leave a + feedback. Contact us Please clarify your doubts about the item, services before placing your order. email: Whatsapp: 91 messages Thanks

Buy from our shop at lowest price.  http://www.ifuturetech.org/product/gps-module/ Feedback & Ratings: We are here for 100% Customer Satisfaction. If you have any issue please contact us once before leaving any negative or neutral feedback and we assure you that your issue will be resolved immediately. Please don't hurry to leave negative or neutral feedback as it will not solve any problem. Please help us to maintain a 5-Star rating by rating us with a 5-Star rating for all products.

Description. "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">SCT-013-030 30A Non-invasive AC current sensor Split Core Current Transformer

GPS Module For Arduino (GY-NEO6MV2 Flight Controller)   Description: Communication Mode: TTL level, compatible with 3.3V/5V system Power Supply: DC 2.7-5V Working Current: 45MA TXD RXD Impedance: 510R Default Baud Rate: Catching Time: Warm start: 1s, Cold start: 27s Working Temp.: -℃ Positional Accuracy: 5M Module size 25 mm x35 mm/0.98''x1.37''(inch) (approx) The antenna size: 25x 25 mm/0.98''x0.98'' Features: Use XM module, MTK Platform, with high-gain active antenna  TTL level, compatible with 3.3V/5V system The default baud rate: With rechargable backup battery, can save the ephemeris data when it power down, and make the warm start. Suitable for RC drone,navigator Integrated Antenna and Sturdy design. Uses(take MCU for example): VCC: Connect 3.3V/5V GND: Connect GND TXD: Connect MCU.RX RXD: Connect MCU.TX   Package Contents: 1 x   GPS Module

GPS Module For Arduino (GY-NEO6MV2 Flight Controller) Use TinyGPS++ Library to integrate with Arduino -  http://arduiniana.org/libraries/tinygpsplus/ Description: Communication Mode: TTL level, compatible with 3.3V/5V system Power Supply: DC 2.7-5V Working Current: 45MA TXD RXD Impedance: 510R Default Baud Rate: Catching Time: Warm start: 1s, Cold start: 27s Working Temp.: -℃ Positional Accuracy: 5M Module size 25 mm x35 mm/0.98''x1.37''(inch) (approx) The antenna size: 25x 25 mm/0.98''x0.98'' Features: Use XM module, MTK Platform, with high-gain active antenna  TTL level, compatible with 3.3V/5V system The default baud rate: With rechargable backup battery, can save the ephemeris data when it power down, and make the warm start. Suitable for RC drone,navigator Integrated Antenna and Sturdy design. Uses(take MCU for example): VCC: Connect 3.3V/5V GND: Connect GND TXD: Connect MCU.RX RXD: Connect MCU.TX   Package Contents: 1 x   GPS Module  Feedback Although we always check our product before shipping and provide as accurate description as possible

CRIUS MultiWii MWC I2C-GPS Navigation Board GPS Adaption Board for 328P MWC Flight Controller     Description: CRIUS MultiWii MWC I2C-GPS Navigation Board GPS Adaption Board for 328P MWC Flight Controller Features: - All GPS data available via the I2C bus to connect to 328P Multiwii FC - A LED on board show GPS 3D Fix status - ATMega 328P Microcontroller - 2 Molex 1.25mm 4Pin socket for GPS receiver and FC - 2 port for ISP and FTDI Other - Dimension: 26 x 20 x 5mm - Weight: 2.4g/6.3g (include cable) - Hole diameter: 3.1mm Package Included: - NAV Module x 1 - UART 4Pin cable (to GPS) 200mm x1 - I2C 4Pin cable (to FC) 100mm x1

Description: SIM908 GPS & Gsm/Gprs Quad Band Serial Modem SIM908 module is a complete Quad-Band GSM/GPRS module which combines GPS technology for satellite navigation. The compact design which integrated GPRS and GPS

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 3.3 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 10 x Interface Base Board Module For Further Details: Email: