Kise v pic

The PIC DEVELOPMENT board demonstrates the capabilities of Microchip’s 8-bit microcontrollers, specifically, 18-, 28- and 40-pin PIC16FXXX, PIC16F1XXX, and PIC18 devices.  It can be used as a standalone demonstration board with a programmed part. Alternatively, it can be used with an in-circuit emulator (for example, MPLAB® Real ICETM) or with an in-circuit programmer/debugger (such as MPLAB® ICD 3 or PICkitTM 3). Microchip offers a bundle of the PICDEM 2 PLUS and the MPLAB® ICD 3, called the MPLAB® ICD 3 Evaluation Kit (with PICDEM 2 Plus), product number DV164036. Sample programs are provided to demonstrate the unique features of the supported devices.       Key Components  LCD display Interface 40 pin socket 4x LEDs four 7 segment display  RS232 interface to PC 12 V adapter connector GPIO Pin connector 4 * 4 switch matrix On-board external oscillators Four push button switches for external stimulus and reset Variable voltage input for ADC simulation Connectivity options Programmer/debugger connectivity using MPLAB ICD 3, MPLAB Real ICE and PICkit 3 PICkitTM Serial Connector for analysis of serial communications peripherals such as SPI or I2C Active RS 232 port Expansion

5V 4--Channel Relay Module for Arduino PIC ARM DSP AVR Electronic NEW Product Description 1. module with pine le relay control, ac voltage maximum 250 V, ac current maximum 10 A, dc voltage maximum 30 V, dc current maximum 10 A;  2. the transistor drive, drive ability;  3. working voltage 5 V  4. has the fixed bolt hole and easy installation  5. small board PCB size: 7.2 cm * 4.8 cm  6. weight ：60 g Package included: 1 PCS Rs. 410 Shipping is all over India. Please Provide Complete Address and phone number. See Shipping description for details Shipment will be sent between 3.00 pm to 4.00 pm except Sundays/Public Holidays.  Tracking details will be provided within 12hours after shipment is booked. Most shipments will be sent through Speed Post/Registered Post

1 Channel Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino This is a  1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).   Features: 1 -Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250 V AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size R elay status indicator LED (red) Weight ： 10 0 g   Module interface specifications (3 wire)   1. External 12V 2. GND external GND 3. 1N interchange relay control interface (Control by 3.3V or 5V Logic)   Package included:   1 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

Product Description: ·          5V 4-Channel Relay interface board ·          IC based  switching ·           Supply 12V DC and 5 V DC for control. ·           High power relays for each channel: 250V 10A AC ·           Indication LED for each output  Standard interface that can be controlled directly by micro controller (Arduino, , AVR, PIC, DSP, ARM)   Application: Application for automation  purpose Package contain: 1 X 4-Channel Relay interface   = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

ULTRASONIC MODULE HC SR04 DISTANCE MEASURING TRANSDUCER SENSOR FOR ARDUINO AVR PIC (Call me for further discounts through coupons)         Description Ultrasonic ranging module HC - SR04 provides 2cm - 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The module includes ultrasonic transmitters, receiver and control circuit. The basic principle of work is as follows: (1) Using IO trigger for at least 10us high level signal,            (2) The Module automatically sends eight 40 kHz and detects whether there is a pulse signal back.           (3) IF the signal is back, through high level, time of high output IO duration is the time from sending ultrasonic to returning. Test distance = (high level time×velocity of sound (340M/S) / 2,     Technical Parameters   Operating Voltage 5 V DC Operating Current 15mA Operating Frequency 40Hz Max Range 4m Min Range 2cm MeasuringAngle 15 ° Trigger Input Signal 10uS TTL pulse Echo Output Signal Input TTL lever signal and the range

MUST HAVE FOR STUDENTS  AND HOBBYIST *** Package include 1 X  Magnetic Sensor Module Module Size 1.75 X 1.4 inch Features: Sensor Module Apply to switchboard, duplicator, washing machine, refrigerator, camera, disinfector, electronic scale, juice level gauge, gas meter and water meter,Home Security System etc Specifications: With four fixed bolt hole for easy installation Operating voltage: 3.3 V-9 V Output Type: Digital switching output (0 and 1) Size: 1.75 x 1.4 inch Package weight:14 g Color:As shown

3.2'' TFT LCD 240x400 HD Touch Shield compatible with Arduino Mega Software driver Library AVR included. Product Summary: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. 3.2” Diagonal display 240x400 Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x400 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC HXA Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm               Features: v   240x400 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive LCD with arduino mega card v   Powerful   HXA controller with 240x400 screen resolution.     Package Include: v   A 3.2” LCD TFT 240x400 touchscreen display attached adaptor PCB with SD slot. v   A plastic container box. v   A stand-alone software library(ATmega32)-zip file via e-mail.   Shipping Details: Our preferred shipping partners are                              Indian speed post Testimonial s: v     we never dispatch even a single product without testing at our facility, watch what our customers say about us at our feedback profile Feedback v     In case you find any problem

3.2'' TFT LCD Touch Shield for Arduino Mega compatible SAME DAY SHIPPING 100% TESTED PRODUCT, SATISFACTION GUARANTEED. Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

3.2'' TFT LCD Touch Shield for Arduino Mega compatible     Product Description: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x320 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC: SSD Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm                                                           Features: v   320x240 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive lcd with arduino mega card v   Powerful   SSD controller with [320x240] screen resolution.   Package Include: v   A 3.2” LCD TFT touchscreen display attached adaptor PCB with SD slot. v   A plastic container box.   Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

John barrel...tower speakers and two subwoofer Sweet sound and ground shacking sound ... Two 8.5 inch subwoofer... super base .. Complete set v hai ..j kise nay Lana hove ta .. Rs dova da dusya gya h

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

MB 102 power supply module 3.3V & 5V for solderless breadboard Ideal choice for solderless prototyping with arduino raspi AVR PIC Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description: ·       Input voltage: V (DC) or USB power supply ·       Output voltage: 3.3V/5V switch ·       Maximum output current: ·       two way independent control, can be switched over to 0 V,3.3 V,5 V ·       On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead usage ·       Breadboard power supply module, compatible with 5 V,3.3 V   Specification Size:                          mm(max) Net weight:            12 g Package weight: 22 g PCB Color:                Black   Package Include: ·       1 x   MB102 breadboard power supply   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

MB 102 power supply module 3.3V & 5V for solderless breadboard Ideal choice for solderless prototyping with arduino raspi AVR PIC   Product Description: ·       Input voltage: V (DC) or USB power supply ·       Output voltage: 3.3V/5V switch ·       Maximum output current: ·       two way independent control, can be switched over to 0 V,3.3 V,5 V ·       On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead usage ·       Breadboard power supply module, compatible with 5 V,3.3 V   Specification Size:                          mm(max) Net weight:           12 g Package weight: 22 g PCB Color:              Black   Package Include: ·       1 x  MB102 breadboard power supply   Shipping Details:    we prefer Indian speed post   Feedback: ·        In case you find any problem

Product features: Using HC - 06 from module 1, a core module, which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid 2, the led indicates a bluetooth connection status, twinkle said there was no bluetooth connectivity, Chang Liang said bluetooth is connected and turned on the port 3, backplane "3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage! 4, interface level 3.3 V, can be connected directly to all kinds of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.), 5 V single chip can be connected directly, without MAX232 couldn/'t through MAX, clearing the effective distance of 10 meters, more than 10 meters is possible, but not to this distance connection quality After 6, pairing when full duplex serial port to use, do not need to know any bluetooth protocol, but supports only one