Logic controller

Lsi Logic SYMU/SYM Bit Pci Scsi Controller Lvd/se ITEM DESCRIPTION - Manufacturer: Lsi Logic - Part Number: SYMU/SYM - Description: 64 Bit Pci Scsi Controller Lvd/se - Condition: Refurbished WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES CONTACT: EMAIL:

Lsi Logic SYMU/SYM Bit Pci Scsi Controller Lvd/se ITEM DESCRIPTION - Manufacturer: Lsi Logic - Part Number: SYMU/SYM - Description: 64 Bit Pci Scsi Controller Lvd/se - Condition: Refurbished WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES

Description L298N is a kind of high voltage, high current motor driver chip produced by ST company. Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V), large output current(instantaneous peak current up to 3A, continuous working current 2A) and 25W of rated power. Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage. The chip can connects to external detecting resistor to give the variations to the control circuit. Using L298N chip to drive the motor, this chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Features： Using L298N made by ST company as the control chip,the module has such characteristics as strong driving  ability, low calorific value and strong anti-interference ability. This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage  of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage. Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability Specification Double H bridge drive Chip L298N (ST NEW) Logical voltage 5V Drive voltage 5V-35V Logical current 0mA-36mA Drive current 2A(MAX single bridge) Storage temperature -20 to +135 Max power 25W Weight 30g Size:mm Applied cases: 1) Driving stepper motor The connection of driving a common 4 line 2 phase electric motor is shown

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

LSI LOGIC LSI DUAL CHANNEL SCSI CONTROLLER CARD FULLY TESTED AND FUNCTIONAL WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES CONTACT: EMAIL:

Buy with confidence. Customer Satisfaction is our Priority | Product Description Case Logic - Candy Beat Micro Earphones + Mic Controller (Answer Switch) | Colour: Blue -High Performance Sound -Heavy Bass -Sweat Proof Design -Custom-fit Earpiece -Once Touch Call / Mic Controller Specifications: -Drive unit: 10mm -Frequency response: Khz -Inpedance: 16 Ohms -Sensitivity: 98+-3Dv -Distortion: -Rated Power: 1mW -Max Power Input: 5mW -Cord Length: 1.2m -Plug: 3.5mm Stereo -Microphone Size: 4*1.5mm -Microphone Sensitivity: -42 +/- 3db Seller Policies: -Shipping only through " Powership" i.e. recognized logistics partners like Blue Dart or DTDC or Fedex as provided by -Fast shipping i.e. Dispatch within 1-2 days -Customer satisfaction is out top most priority. Feel free to contact us. -INCASE OF ANY ISSUES OR CONCERNS - CONTACT US / Do Not Leave Negative Feedback, we will try to resolve your matter   -Call us on or write to us at any time

HP Ultra320-SCSI Controller Card 64bit PCI-X SCSI PN: LSI-R Ultra320 SCSI Single-Channel Host Adapter LSI/HP PCI-X 133 SCSI Controller w/LED Cable , LSILP-HP, LSI-HP Manufacturer: LSI Logic/HP Part Numbers: , LSILP-HP, LSI-HP Mobile No. , .

Symbios LSI Logic SYMU Ultra2 SCSI Host Bus Adapter 100 % WORKING TESTED WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES CONTACT: EMAIL:

Symbios LSI Logic SYMU Ultra2 SCSI Host Bus Adapter 100 % WORKING TESTED WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES SCSI,FIBER, COMPUTER RELATED CABLES SUN PRODUCTS EMC PRODUCTS STORAGES TAPE DRIVES, LIBRARIES CONTACT: EMAIL: SENTHILKUMAR

Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC   Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V   Driven part of the peak current Io: 2A   The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)   The logical part of the operating current range: 0 ~ 36mA   Storage temperature: -25 Deg C ~ +130 Deg C   Other Extensions: control of direction indicators, the logic part of the plate to take power interface.Driver Board Size: 55mm * 60mm * 30mm   Drive plate Weight: 33g   Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.

Symbios LSI Logic SYM8951U Ultra2 SCSI Host Bus Adapter 100 % WORKING TESTED We are dealing old server,spare parts, desktops,laptops & services scsi, fiber, computer related cables sun products, emc products storages tape drivers, libraries. CONTACT: 9840889242 EMAIL: info@hitechcomputers.in

We are one of the prominent Manufacturers CONSULTANT & SUPPLIERS Paper Cup Making Machine. The Automatic Paper Cup Making Machine, Paper Cup Machine offered by us is highly demanded by many industries as these machines provide a helping hand in the revolution of using paper cup. The increasing demand of our Paper Cup Making Machinery has statured as the reliable merchandiser and exporter of Paper Cup Making Machine. *T&C apply* PRODUCTION: Production per minute- Cups Raw material-Single size PE coated paper GSM of paper- Bottom Diameter-52.2mm Controls-Programmable logic controller (PLC) Voltage-420V/50HZ/3 Phase Power-5HP Dimension-9x4x5 feet

Serial to RS232 module by Positron allows you to convert TTL logic from your microcontroller to 232 logic levels. Using this module you can easily interface TTL logic GSMs, GPS and finger print sensor modules etc. INTRODUCTION   Serial to RS232 module by Positron allows you to convert TTL logic from your microcontroller to 232 logic levels. Using this module you can easily interface TTL logic GSMs, GPS and finger print sensor modules etc. with your microcontroller. This module can easily be used with Positron Development Boards.  SALIENT FEATURES This module has 4 pins viz. Receiver, Transmitter, Vcc and Ground These four pins can easily be connected to any of the Transmitter, Receiver, Vcc and Ground of a micro controller development board The module uses MAX232 IC and can be easily connected to your laptop using Positron’s DB9 cables

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc....   ***(Work with All Analog/Digital circuits with signal from 3V to 15V) *** Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 3.3v and 5v micro controller  (Check Other Listings  for  1.8V-5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 3V to 16V(1.5V to 16V for 1.8V logic) with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 3.3V and 5V micro controllers/Digital (1.8V Version also available Please Check My other Listings).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

Description PIC12F675 - SMD Package Microcontroller - 2 PCS.     8BIT FLASH MCU, SMD, 12F675, SOIC8   Controller Family/Series:   PIC12   Core Size:   8bit   No. of I/O's:   6   Program Memory Size:   1 Kwords   EEPROM Memory Size:   128Byte   RAM Memory Size:   64Byte   CPU Speed:   20MHz   Oscillator Type:   External, Internal   No. of Timers:   1   Peripherals:   ADC, Comparator, Timer   Digital IC Case Style:   SOIC   Supply Voltage Range:   2V to 5.5V   Operating Temperature Range:   -40°C to +85°C   No. of Pins:   8   SVHC:   No SVHC (18-Jun-)   Clock Frequency:   20MHz   Device Marking:   PIC12F675-I/SN   Flash Memory Size:   1.75KB   IC Generic Number:   12F675     Logic Function Number:   12F675   Memory Configuration:   1K x 14   Memory Size:   x 14   Memory Type:   FLASH   Microprocessor/Controller Features:   ISP, WDT   No. of ADC Inputs:   4   Operating Temperature Min:   -40°C   Package / Case:   SOIC   RAM Size:   64Byte   Supply Voltage Max:   5.5V   Supply Voltage Min:   2V   Termination Type:   SMD     For further clarification, please call    Any time between 10am to 5pm Mondays to Fridays or e-mail: or ==Fast Shipping== Once you place the order, your shipment will be shipped out via DTDC Couriers within 24 business hours. WE SHIPS ITEM VIA DTDC COURIERS IF YOUR AREA IS NOT SERVICEABLE BY DTDC COURIERS THEN PLEASE DO NOT ORDER NO NEGATIVE OR NUTERAL FEED BACK WILL ACCEPTED IN THIS REGARD   OR IF YOU WANT TO SEND IT BY INDIA POST (IT WILL TAKE LITTLE LONGER TO DELIVER) PLEASE MAIL US AFTER YOUR ORDER   ==Contact== Got any questions? Feel free to contact us via 'Ask a question' option on and we will reply with detailed answer to your query pretty fast. We care about our valued customers, and will always try to help you.  ==One Request== Please leave positive feedback once you receive the item

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, PIC12F675 - SMD Package Microcontroller - 2 PCS. 8BIT FLASH MCU, SMD, 12F675, SOIC8   Controller Family/Series:   PIC12   Core Size:   8bit   No. of I/O's:   6   Program Memory Size:   1 Kwords   EEPROM Memory Size:   128Byte   RAM Memory Size:   64Byte   CPU Speed:   20MHz   Oscillator Type:   External, Internal   No. of Timers:   1   Peripherals:   ADC, Comparator, Timer   Digital IC Case Style:   SOIC   Supply Voltage Range:   2V to 5.5V   Operating Temperature Range:   -40°C to +85°C   No. of Pins:   8   SVHC:   No SVHC (18-Jun-)   Clock Frequency:   20MHz   Device Marking:   PIC12F675-I/SN   Flash Memory Size:   1.75KB   IC Generic Number:   12F675     Logic Function Number:   12F675   Memory Configuration:   1K x 14   Memory Size:   x 14   Memory Type:   FLASH   Microprocessor/Controller Features:   ISP, WDT   No. of ADC Inputs:   4   Operating Temperature Min:   -40°C   Package / Case:   SOIC   RAM Size:   64Byte   Supply Voltage Max:   5.5V   Supply Voltage Min:   2V   Termination Type:   SMD – Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

HP PCI-X Ultra-320 SCSI Controller LVD/SE HP LSI Logic Ultra320 SCSI LVD Controller card HBA PCI-X LSIA-R Server, Workstations, Networking Equipment, STROAGE(TAPE DRIVES), ROUTERS,SUN MICROSYSTEMS, CISCO, 3COM, EMULEX, QLOCIG, EMC,STOREDGE Multi pack, Fibre channel ACCESSORIES, PARTS, SMPS,RAID CARDS,SCSI HARD DISKS ITEMS, ECC RAMS,TERMINATORS,VRM’s,CABLES SERVER HARD DISK SCSI SAS FC Email ID: ,

HP 361651-001 398586-001 434644-001 PCI-X Ultra-320 SCSI Controller LVD/SE HP LSI Logic Ultra320 SCSI LVD Controller card HBA PCI-X LSI20320A-R 398586-001 Server, Workstations, Networking Equipment, STROAGE(TAPE DRIVES), ROUTERS,SUN MICROSYSTEMS, CISCO, 3COM, EMULEX, QLOCIG, EMC,STOREDGE Multi pack, Fibre channel ACCESSORIES, PARTS, SMPS,RAID CARDS,SCSI HARD DISKS ITEMS, ECC RAMS,TERMINATORS,VRM’s,CABLES SERVER HARD DISK SCSI SAS FC Email ID: chennaibs@gmail.com, 9840269314

This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band.  Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller.    Features Worldwide license-free 2.4GHz ISM band operation 250kbps, 1Mbps and 2Mbps on-air data-rate options Enhanced ShockBurst™ hardware protocol accelerator Ultra low power consumption – months to years of battery lifetime   Specifications Power supply: V IO port working voltage:  0~3.3v / 5v Transmitting rate: +7dB Receiving sensitivity: ≤ -90dB Transmission range: 250m

DESCRIPTION 2.4 Inch Tft Touch Screen Lcd Module For Arduino. The Lcd Has Excellent Vivid Color Contrast. Spice Up Your Arduino Project With A Beautiful Large Touchscreen Display Shield With Built In Microsd Card Connection. This Tft Display Is Big (2.4 Diagonal) Bright (4 White-Led Backlight) And Colorful (18-Bit Different Shades)! Pixels With Individual Pixel Control. It Has Way More Resolution Than A Black And White Display. As A Bonus, This Display Has A Resistive Touchscreen Attached To It Already, So You Can Detect Finger Presses Anywhere On The Screen. 2.4 Diagonal Lcd Tft Display Resolution, 18-Bit () Color Spfd Controller With Built In Video Ram Buffer 8 Bit Digital Interface, Plus 4 Control Lines Uses Digital Pins 5-13 And Analog 0-3. That Means You Can Use Digital Pins 2, 3 And Analog 4 And 5. Pin 12 Is Available If Not Using The Microsd Works With Any Arduino '328 Or Mega (Leonardo Not Supported Yet) 5v Compatible! Use With 3.3v Or 5v Logic Onboard 3.3v 300ma Ldo Regulator 4 White Led Backlight. On By Default But You Can Connect The Transistor To A Digital Pin For Backlight Control 4-Wire Resistive Touchscreen We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

The HP ProLiant DL360 G7 combines performance, intelligent power and cooling management with IT management tools and essential fault tolerance, all optimized for space constrained installations. A 1U server with the improved performance of the latest Intel 5600 series processors, Unique HP Thermal Logic Technologies that provide leadership in energy efficiencies and ProLiant iLO 3 remote management. HP continues to provide more performance, flexibility and efficiency for space constrained environments. 1U Rack Server which amazing Support K4000 Quadro Card for Graphical Purpose. Clear Configuration: HP Proliant Server DL360 G7 with 4Gigabit Ethernet port 64GB DDR3 memory Installed 18 Memory Slot (8*8GB) Raid P410i Sas Controller card Dual Power Consumption 460W power supply Processor Xeon X5670 2.93Ghz (2*2.93Ghz 12Core 24thread 24mb cache) HP 300GB Sas x2 HDD 10k dual port Best Server for Maya, Video Rendering, VRay, Highend Multimedia Processing works. Best in Graphics Support rack server... Remote demo available