Max485 ttl module

NooElec PL USB to Serial (TTL) Module/Adapter with Female and Male Wiring Harnesses & Test Jumper. Compatible with Windows 98 through Windows 7; Mac OS 8 through OS X Linux and Android!. A handy USB to TTL converter based on the PL LEDs are on-board to indicate power data reception and data transmission. A 5V and 3.3V output is available--you can power your project directly from the USB port so it functions as a USB power supply too. The 5-pin I O is clearly labelled on the board.Both a 5-pin female to male and a 5-pin female to female multicolor jumper cable set are included! This will allow connection to Arduino breadboards and nearly any other board with standard male or female headers.A shunt is also included

Product Description On Board MAX 485 Chip, it’s a low power transceiver for RS 485 communication On board  5.08(mm) 2P connector for RS 485 wires. All the pins of the chip are brought out, can be controlled by MCU Working voltage 5V PCB dimension:44(mm)x14(mm) Package contents: 1 x  MAX485 TTL TO RS485 Convertor Module SHIPPING: power Shipping Payment Policy Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping Policy Providing A Valid And Working Mobile Number Is Mandatory For Us To Dispatch Your Order. In Case If We Find That The Number Provided By You During Order Placement To Be Incorrect We Reserve The Right To Cancel The Order And Your Amount Will Be Refunded To You Through Paisapay And Your Order Will Not Be Dispatched All orders will be dispatched within 3 working days or earlier. Order once placed cannot be cancelled or modified. Normal courier delivery times are 72 hrs for metro cities and upto 10 days for other areas. These times are only indicative and the actual delivery times may vary. Octroi, if any, will be additional and to be bourne by the buyer. Octroi is not included

Prolific USB-to-Serial TTL Module Prolific 3v PL-HXD Module. SALIENT FEATURES   USB to serial port   3.3V/5V external power supply   PL, mini USB, UART interface   Compatible with development board interface of ViewTool   Fully open source application

Description Package Includes: 1 Piece new  MAX485 Module / RS- 485 Module / TTL to RS- 485 Converter Module For Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  MAX485 Module / RS- 485 Module / TTL to RS- 485 Converter Module For Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description 100% brand new and high quality All pins of chip have been lead to can be controlled through the microcontroller On board then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver Specification Color:- As shown

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P HC06 Bluetooth Module (Slave) Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P Bluetooth Module (Master + Slave) KG037 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P Bluetooth Module (Master + Slave) KG037 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The TTL HC-05 Bluetooth Module Serial port Bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Security:  Authentication and encryption Profiles:  Bluetooth serial port Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps In this now, we provide HC-05 and HC-06. HC-05 could be setting to Master or Slave by user. HC-06 has be designed Master or Slave when the factory, user couldn't change the role. Technical parameters: Bluetooth protocal:  Bluetooth Specification v2.0+EDR Frequency:  2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power:  =4dBm, Class 2   Package Includes: 1 Piece new  TTL O/P HC06 Bluetooth Module (Slave) Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Product Description On Board MAX 485 Chip, it’s a low power transceiver for RS 485 communication On board  5.08(mm) 2P connector for RS 485 wires. All the pins of the chip are brought out, can be controlled by MCU Working voltage 5V PCB dimension:44(mm)x14(mm) Powered by Turbo Lister

CP Serial Converter USB 2.0 To TTL UART 5PIN Module +  Free Dupont line 5 pc female to female! Description:     Name: CP, USB to TTL Module     Baud Rate Range: Mbps     Control chip: CP     Working voltage: 4V-5.25V     Support: Windows 98SE, , XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40     Output voltage: Dual voltage output (3.3V and 5V)     Output indicator: Power indicator, TXD indicator     Output current: 100mA (with current limiting protection)     5 pins for 3.3V, TXD, RXD, GND & 5V   Packaging List:     1 x USB to TTL Module     5 x Dupont Wire

CP Module Description: Name: CP, USB to TTL Module Baud Rate Range: Mbps Control chip: CP Working voltage: 4V-5.25V Support: Windows 98SE, , XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40 Output voltage: Dual voltage output (3.3V and 5V) Output indicator: Power indicator, TXD indicator Output current: 100mA (with current limiting protection) 6 Pins for: RST TXD RXD GND 5V 3.3V   Pro Mini description: 1.14 Digital input / output ports RX, TX D13, D2 ~~ of, 2 or 8 analog input port A0 to A7 3. The TTL level serial transceiver port RX / TX 4.6 PWM ports, D3,, D5, D6, D9, D10, D11. Using Atmel Atmega328P-AU microcontroller supports serial download 7. Support for external 3.3V ~ 12V DC power supply 8. Support 9V battery-powered the 9 clock frequency 8MHz 10. Dimensions: (mm)   Package Included: 1 X CP X Arduino Pro mini

Serial to RS232 module by Positron allows you to convert TTL logic from your microcontroller to 232 logic levels. Using this module you can easily interface TTL logic GSMs, GPS and finger print sensor modules etc. INTRODUCTION   Serial to RS232 module by Positron allows you to convert TTL logic from your microcontroller to 232 logic levels. Using this module you can easily interface TTL logic GSMs, GPS and finger print sensor modules etc. with your microcontroller. This module can easily be used with Positron Development Boards.  SALIENT FEATURES This module has 4 pins viz. Receiver, Transmitter, Vcc and Ground These four pins can easily be connected to any of the Transmitter, Receiver, Vcc and Ground of a micro controller development board The module uses MAX232 IC and can be easily connected to your laptop using Positron’s DB9 cables

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 3.3 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email: