Relay driver module

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers,  such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc.... ***(Work with All Analog/Digital circuits with signal from 1.5V to 15V) ***   Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 1.8V,3.3v and 5v micro controller  (Check Other Listings  for  3.3V,5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 1.5V to 16V with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 1.8V, 3.3V and 5V micro controllers/Digital).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

1 Channel Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino This is a  1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).   Features: 1 -Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250 V AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size R elay status indicator LED (red) Weight ： 10 0 g   Module interface specifications (3 wire)   1. External 12V 2. GND external GND 3. 1N interchange relay control interface (Control by 3.3V or 5V Logic)   Package included:   1 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

Package Contents 1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has one (1) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free wheeling diode which will further protect your microcontroller from relay kick back. This is a 12V 1-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Free wheeling diode to protect your microcontroller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 10 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 1 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eight (8) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by ULN IC hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - ULN IC used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by ULN IC hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - ULN IC used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has 2 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two (2) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and Transistor will further protect your micro-controller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - BC 547 Transistor used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Features: Brand new and high quality. This module can be used with Special Sensor Shield V4.0. You can do some simple design about it. This is 2-Channel 5V Relay Module for PIC ARM AVR DSP. It can be able to control various appliances, and other equipments with large current. Easy to be controlled by a lots of Microcontrollers. Just use 5v input signal to control. Equiped with high-current relay, AC250V 10A, AC150V 10A; DC30V 10A, DC28V 10A. size:3.9cm x 5.1cm (1.54inch x 2.01inch).   Package contents: 1 x   5V 10A   2-Ch  Relay Board Module FEED BACK We request buyers to leave all star feedback if satisfied and if not satisfied they can communicate and contact us so we can take appropriate action.     Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback      Your feedback is important for us to grow our business on , so please do leave feedback

A stepper motor driver module for 3D printer Ramp CNC A stepper driver with heat sink Order multiple quantity from 4d_innovations to save on shipping cost.   Product Description:   ·            The A is a complete micro stepping motor driver with built-in converter, easy to operate. The products can be

Description Package Includes: 1 Piece new  DRV stepper motor driver Module arduino 3D printer RAMPS1.4 RepRap StepStick

Isolated Optocoupler Driver Power Relay Module 8CH 5V for AVR 51 PIC SCM  FREE SHIPPING Product Name Optocoupler Driver Relay Module Relay Type SRD-05VDC-SL-C Coil Voltage DC 5V Pole Number 8 Channel Load 10A, AC 250V/125V, DC 30V/28V Overall Size 13.8 x 5.5 x 1.8cm/5.4" x 2.2" x 0.7"(L*W*H) Materials Metal, Plastic, Electric Parts Main Color Blue

New Improved 4 Channel IR Remote Control Board (Ideal for DIY Projects,Home/Office Automation) ** Firmware IC (IR-4 8PIN-DIP Check Circuit)  with IR  Remote Control (battery included) and IR receiver is available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Applications: Applications include Garage door controllers, Car door controllers,Robotics Control switching of lights & fans (on & off) at homes, offices, shops, hotels by remote. Switching motors on & off. IR remote control projects Can easily replace switches with IR remote Features: Brand New and High Quality Restore Last Relay Position when Power   Relay contacts are brought out as Screw Terminal Each relays can Switch ON or OFF individually Can be used directly to control 240V power appliances Perfect for switching 240V appliances like Lights, Fans, etc remotely using IR remote. Receiver operates from 12V AC or DC power supply (not included) High Quality PCB that can easily be mounted inside regular switchboard   ON/OFF by using single button   Remote control Key1    -> Relay 1 ON/OFF   Remote control Key2    -> Relay 2 ON/OFF   Remote control Key3    -> Relay 3 ON/OFF   Remote control Key4    -> Relay 4 ON/OFF   Remote control MUTE  -> ALL Relay OFF   Remote control PLAY   -> ALL Relay ON   Remote control VOL+   -> Enable Buzzer   Remote control VOL -   -> Disable Buzzer ** Programmed Receiver IC (IR-4 8PIN DIP) with IR  Remote Control (battery included) available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Package Contents: 1 x 4 Channel IR Relay Board 1 x Remote Control (battery included)

New Improved 4 Channel IR Remote Control Board (Ideal for DIY Projects,Home/Office Automation) ** Firmware IC (IR-4 8PIN-DIP Check Circuit)  with IR  Remote Control (battery included) and IR receiver is available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Applications: Applications include Garage door controllers, Car door controllers,Robotics Control switching of lights & fans (on & off) at homes, offices, shops, hotels by remote. Switching motors on & off. IR remote control projects Can easily replace switches with IR remote Features: Brand New and High Quality Restore Last Relay Position when Power   Relay contacts are brought out as Screw Terminal Each relays can Switch ON or OFF individually Can be used directly to control 240V power appliances Perfect for switching 240V appliances like Lights, Fans, etc remotely using IR remote. Receiver operates from 12V AC or DC power supply (not included) High Quality PCB that can easily be mounted inside regular switchboard   ON/OFF by using single button   Remote control Key1    -> Relay 1 ON/OFF   Remote control Key2    -> Relay 2 ON/OFF   Remote control Key3    -> Relay 3 ON/OFF   Remote control Key4    -> Relay 4 ON/OFF   Remote control MUTE  -> ALL Relay OFF   Remote control PLAY   -> ALL Relay ON   Remote control VOL+   -> Enable Buzzer   Remote control VOL -   -> Disable Buzzer ** Programmed Receiver IC (IR-4 8PIN DIP) with IR  Remote Control (battery included) available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Package Contents: 1 x 4 Channel IR Relay Board 1 x Remote Control (as per new shipping policy from FedEx battery cannot include for power ship orders, all non power ship orders battery included)