Serial uart

HLK-RM04 Serial Uart to Ethernet Switch WIFI Module with antenna and HLK-RM04 UART to WIFI  Module Test Base Board   Description Product features. 
 1). UART to WIFI Wireless Module ， UART to Ethernet Module ， Ethernet to WIFI Module ， UART server module ， Make your Serial Device connected to the Internet easily. Double Data Rate All transparently. Guarantee the highest limit of Usability and Compatibility. 
 2). The module integrated m adaptive Ethernet interface.The highest baud rate up to Kbps of the serial communication.and the highest rate of TTL serial port is 500KBPS. 
 3). Each module

Other Items Feedbacks About Us Contact Us Add To Favorites CNB816-USB to Serial UART / TTL (3.3V/5V) Converter for Android Driver Solution PLHXD Android Driver Solution    Prolific provides Android USB Host API driver solution (NO root permission needed) for connecting PL USB-to-Serial devices to Android-powered devices with USB Host API mode support. The PL Android JAVA driver library allows customers and developers to write Android applications to interface their PL RS-232/UART devices with millions of Android USB host devices like Smartphones, Tablets, and Smart TVs.     Download: PL Android USB Host API SDK (vb) Requirements: --------------------- - USB Device with PLHXD, PLEA, or PLRA controller chip    NOTE: PLHXA and PLXA are not supported (Discontinued Products) - Android-Powered Device (Tablet/Phones) with USB Host Mode API Support - Android 3.2 and above OS versions Product Applications: Single-chip upgrade solution for Legacy RS232 devices to USB interface USB to RS232 converters/cables/dongles Healthcare/Medical USB Interface Data Transfer Cable Personal Infotainment/Media Player Docking USB Interface Cellular/PDA USB Interface Data Transfer Cable Serial-over-IP Wireless Solution USB Barcode/Smart Card Readers GPS/Navigation USB Interface Point-of-Sale (POS) Terminals/Printers PC Docking Station/Port Replicators Industrial/Instrumentation/Automation Control USB Interface USB Modem/Wireless/Zigbee USB Interface Description: This is a newly designed product, using the Taiwan prolific production company PLHXD chips, PLHXD perfectly compatible with win XP/VISTA//Android OTG. The PL-HXD is a low cost and high performance USB-to-Serial Bridge Controller. The PL-HXD provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL-HXD highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. Full compliance with the USB Specification v1.1 Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps. Supports RS422/RS485 interface. Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection. Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

Other Items Feedbacks About Us Contact Us Add To Favorites CNB Pc FT232RL - USB to Serial UART interface IC Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

    Other Items Feedbacks About Us Contact Us Add To Favorites CNB807 -1 Pc FT232RL - USB to Serial UART interface IC Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: 0755-2420735, +91-9039873050 (10:30AM-6:30PM, Monday-Saturday) email: chipsnboards@gmail.com .in Toll free Helpline: 1800 209 3229 FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

The USB to RS232 Converter cables are a family of USB to RS232 levels serial UART converter cables incorporating USB to serial UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a RS232 level serial UART interface to USB.  SALIENT FEATURES  DB9 to USB Wired straight through Compitible with all modules

Product Description This is a wifi solution based on IC ESP from Espressif, very price competitive wifi module, and also great function. Bring your project to the internet of things easily! Features: Very competitive price AP, STA, AP+STA modes available. Very simple AT commands, easy to use. internal LWIP interface. Only four pins interface, VCC-3V3, GND, TXD and RXD. Current firmware V091 for all stock, new reserved reset and CH_PD (for updating) pins available, you can refresh the firmware now. All using new ESPex new chip, old chip is not available anymore. Pin description Pin High Status Low Status Note VCC, GND Use standalone power source, or large capacitor, all power of this module from external TXD, RXD The serial port RST - restart CH_PD Flash boot and Update Mode - chip enable, so always connect to high status with VCC GPIO0 - Update mode GPIO2 - - GPIO 15 (when avaialble) NC Flash boot Mode Only for a few version, Wi07-3 GPIO 12 GPIO 13 GPIO 14 GPIO 16 Hardware RST No need any pull-up   AT Commands Format Baud rate at (new line) use option "send new line" or 'carriage return' for each command x is the commands Set Inquiry Test Execute AT+ = AT+ ? AT+ =? AT+ AT+CWMODE= AT+CWMODE? AT+CWMODE=? - Set the network mode Check current mode Return which modes supported - Commands carefully there are must be no any spaces between the " and IP address or port Commands Description Type Set/Execute Inquiry test Parameters and Examples AT general test basic - - - - AT+RST restart the module basic - - - - AT+GMR check firmware version basic - - - - AT+CWMODE wifi mode wifi AT+CWMODE= AT+CWMODE? AT+CWMODE=? 1= Sta, 2= AP, 3=both, Sta is the default mode of router, AP is a normal mode for devices AT+CWJAP join the AP wifi AT+ CWJAP =, AT+ CWJAP? - ssid = ssid, pwd = wifi password AT+CWLAP list the AP wifi AT+CWLAP AT+CWQAP quit the AP wifi AT+CWQAP - AT+CWQAP=? AT+ CWSAP set the parameters of AP wifi AT+ CWSAP=,,, AT+ CWSAP? ssid, pwd, chl = channel, ecn = encryption; eg. Connect to your router: AT+CWJAP="www.shanrittech.com","helloworld"; and check if connected: AT+CWJAP? AT+CWLIF check join devices' IP wifi AT+CWLIF - - AT+ CIPSTATUS get the connection status TCP/IP AT+ CIPSTATUS,,,, = client or server mode AT+CIPSTART set up TCP or UDP connection TCP/IP 1)single connection (+CIPMUX=0) AT+CIPSTART=,,; 2) multiple connection (+CIPMUX=1) AT+CIPSTART=,, - AT+CIPSTART=? id = 0-4, type = TCP/UDP, addr = IP address, port= port; eg. Connect to another TCP server, set multiple connection first: AT+CIPMUX=1; connect: AT+CIPSTART=4,"TCP","X1.X2.X3.X AT+CIPMODE set data transmission mode TCP/IP AT+CIPMODE= AT+CIPSEND? 0 not data mode, 1 data mode; return "Link is builded" AT+CIPSEND send data TCP/IP 1)single connection(+CIPMUX=0) AT+CIPSEND=; 2) multiple connection (+CIPMUX=1) AT+CIPSEND=, AT+CIPSEND=? eg. send data: AT+CIPSEND=4,15 and then enter the data. AT+CIPCLOSE close TCP or UDP connection TCP/IP AT+CIPCLOSE= or AT+CIPCLOSE AT+CIPCLOSE=? AT+CIFSR Get IP address TCP/IP AT+CIFSR AT+ CIFSR=? AT+ CIPMUX set mutiple connection TCP/IP AT+ CIPMUX= AT+ CIPMUX? 0 for single connection 1 for multiple connection AT+ CIPSERVER set as server TCP/IP AT+ CIPSERVER= [,] mode 0 to close server mode, mode 1 to open; port = port; eg. turn on as a TCP server: AT+CIPSERVER=, check the self server IP address: AT+CIFSR=? AT+ CIPSTO Set the server timeout AT+CIPSTO= AT+CIPSTO?

Product Description This is a wifi solution based on IC ESP from Espressif, very price competitive wifi module, and also great function. Bring your project to the internet of things easily! Features: Very competitive price AP, STA, AP+STA modes available. Very simple AT commands, easy to use. internal LWIP interface. Only four pins interface, VCC-3V3, GND, TXD and RXD. Current firmware V091 for all stock, new reserved reset and CH_PD (for updating) pins available, you can refresh the firmware now. All using new ESPex new chip, old chip is not available anymore. Pin description Pin High Status Low Status Note VCC, GND Use standalone power source, or large capacitor, all power of this module from external TXD, RXD The serial port RST - restart CH_PD Flash boot and Update Mode - chip enable, so always connect to high status with VCC GPIO0 - Update mode GPIO2 - - GPIO 15 (when avaialble) NC Flash boot Mode Only for a few version, Wi07-3 GPIO 12 GPIO 13 GPIO 14 GPIO 16 Hardware RST No need any pull-up AT commands §   Baud rate: (from v0.90, v0.80 and older: ) §   The AT part of the command can be written large or small, however, the following command must always be written large §   Make sure that before, after and within the command no spaces (space) occur General AT commands AT command Description Parameter Example AT Test command, are always "OK" back AT AT + RST Reset of the module, the module's boot messages followed by  ready  back AT + RST AT + GMR Querying the Firmware Version AT + GMR WiFi AT commands AT command Description Parameter Example AT + CWMODE =  Setting the WiFi mode  1) Station 1 =  2 = Access Point  3 = Both AT + CWMODE = 1 AT + CWMODE? Query WiFi mode AT + CWMODE? AT + CWMODE =? Query of possible settings for WiFi mode AT + CWMODE =? AT + CIPMUX = Using multiple connections 0 = single compound  1 = Multiple connections AT + CIPMUX = 1 AT + CIPMODE = Setting the data mode 0 = transparent  1 = Data AT + CIPMODE = 1 AT + CIPMODE? Output of the data set mode AT + CIPMODE? WiFi commands (Station / client) AT command Description Parameter Example AT + CWJAP =, Connecting to WiFi network ssid "SSID"  pass "password" AT + CWJAP = "makerday", "M4k3rd4y" AT + CWJAP? Output of the currently connected WiFi network AT + CWJAP? AT + CWLAP Output of available APs  2) AT + CWLAP AT + CWQAP Closes the connection to an access point AT + CWQAP AT + CIFSR Issue its own IP address AT + CIFSR WiFi commands (Access Point) AT command Description Parameter Example AT + CWSAP =, [,,] Set the access point parameters  3) ssid "SSID"  pass "password"  chan "channel"  enc "Encryption"  (0 = Open  1 = WEP  WPA_PSK 2 =  3 = WPA2_PSK  4 = WPA_WPA2_PSK) AT + CWSAP = "makerday", "M4k3rd4y" 5.3 AT + CWSAP? Output the current settings for the AP AT + CWSAP? AT + CWLIF Lists stations connected IPs 4) AT + CWLIF WiFi commands (IP Client) AT command Description Parameter Example AT + CIPSTATUS Output status of the IP connection (s) AT + CIPSTATUS AT + CIPSTART =,, Creating an IP connection with AT + CIPMUX = 0 type: "TCP" or "UDP"  address "IP address"  port: TCP / UDP port AT + CIPSTART = "TCP", " AT + CIPSEND = Sending data over a single compound  5) len: Data length AT + CIPSEND = AT + CIPCLOSE Close a single TCP or UDP connection AT + CIPCLOSE AT + CIPSTART =,,, Creating an IP connection with AT + CIPMUX = 1 id: 0-4  type: "TCP" or "UDP"  address "IP address"  port: TCP / UDP port AT + CIPSTART = "TCP", " AT + CIPSEND =, Send data via merhere compounds 6) id: 0-4  len: Data length AT + CIPSEND = AT + CIPCLOSE = Close one of several TCP or UDP connection id: 0-4 AT + CIPCLOSE = 1 WiFi commands (IP server) AT command Description Parameter Example AT + CIPSERVER = 1 [,] Starts the TCP server port: TCP port AT + CIPSERVER = AT + CIPSERVER = 0 Terminates the TCP server AT + CIPSERVER = 0 AT + CIPSTO = Sets timeout for TCP server timeout = s AT + CIPSTO = 180 AT + CIPSTO? Specifies timeout of TCP server AT + CIPSTO? If a TCP server is started, it can handle up to 5 simultaneous connections. Other compounds can be created, but only served when others are closed or terminated by timeout. The module incoming data directly with the prefix  + IPD  issued: + IPD,   OK   + IPD, 0.6: ON   OK The output is divided as follows: + IPD,,, It is  id  the ID of the compound (0-5),  len  the length of the resulting data packet and  data  contains the data received from the client. In the above example as first sends compound 1 the value   and then connect the string 0  ON     Powered by Turbo Lister

      The USB to RS232 converter board is most essential bridge needed to connect serial device to log the data to pc or laptop. If you have a development board like 8051, AVR, PIC or any other with serial UART or RS232 connector. Then use the USB to RS232 converter to connect these devices for programming or communication with the PC or Laptop.              Now a days most of the laptops does not have COM ports to connect directly with RS232 cable. So use i-labz USB to RS232 converter for interfacing. If you are planning to buy 8051, AVR, PIC or any other boards like GSM modem, GPS, Bluetooth, Finger print scanner or Ultrasonic distance finder then you must use USB to RS232 connector for connecting or troubleshooting with laptop. CP210x Driver Installation Guide - USB Driver Installation Instructions Download Terminal tool for Troubleshooting(winXP/7/8)               To test the USB to RS232 converter use windows hiighper terminal (using winXP as OS) or terminal tool. The procedure to test to setup the highper terminal is explained

The ESP modules offer a very affordable way to expand microcontroller projects with an Internet connection. The good range, ease of configuration and especially the low price, these modules are very attractive for IoT projects of all kinds. Data sheet and related link will be provided once you buy the product and email with subject as esp to Plz watch video for more details https://www.youtube.com/watch?v=7zD92FXQc8Q&feature=youtu.be Note: All inputs are not 5V tolerant of ESP and may be used only with 3.3V. For the sample arduino code you need to send a mail to with subject as "esp code"  after buying All Shipping through powership Label Signal VCC 3.3V (3.6V max) Supply Voltage GND Ground TXD Transmit Data (3.3V level) RXD Receive Data (3.3V level!) CH_PD Chip Power down: (LOW = Power down active) GPIO0 General Purpose I / O 0 GPIO2 General Purpose I / O 2 RST Reset (LOW = Reset active)

ESP serial Wi-Fi UART wireless IOT module 3.3V AP+STA   For RasPi, arduino, AVR, other MCU ESP serial wifi Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description esp serial wifi:   ESP is a highly integrated chip designed for the needs of a new connected IoT world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. Note:   This module requires a 3.3V supply for VCC, and 3.3V logic. It is not 5V tolerant. Connecting Rx or Tx on 5V Arduino may destroy this module. You must use a logic level converter, or a 3.3V Arduino. Also the 3.3V supply on the Arduino Uno has inadequate current capability to power this module. You must provide a separate, higher 3.3V supply (about 300mA or better)   Features ESP serial wifi: ·         SDIO 2.0, SPI, UART ·         Integrated RF switch, balun, 24dBm PA, DCXO, and PMU ·         Integrated RISC processor, on-chip memory and external memory interfaces ·         Integrated MAC/baseband processors ·         Quality of Service management ·         I2S interface for high fidelity audio applications ·         On-chip low-dropout linear regulators for all internal supplies ·         Proprietary spurious-free clock generation architecture ·         Integrated WEP, TKIP, AES, and WAPI engines   Specification ESPEX: ·             b/g/n ·             Wi-Fi Direct (P2P), soft-AP ·             Integrated TCP/IP protocol stack ·             Integrated TR switch, balun, LNA, power amplifier and matching network ·             Integrated PLLs, regulators, DCXO and power management units ·             +19.5dBm output power

1 Piece USB 2.0 to TTL UART Serial Converter Adapter for Arduino, AVR, ARM / Other MCU. Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details This is a USB to Serial Converter Module based on PL-HX IC Device Specifications Based on PL-HX IC 5 Pins - 3.3V, 5.0V, TXD, RXD, GND Can be used to program Arduino Pro Mini. Package Include 1 Piece USB 2.0 to TTL UART Serial Converter Adapter for Arduino, AVR, ARM / Other MCU 5 x Femalre to Femalre Jumper Wires (Note: Wire Colour May Vary) About Us We are a small company based

1 Piece USB 2.0 to TTL UART Serial Converter Adapter for Arduino, AVR, ARM / Other MCU. Order more than one piece to save shipping cost. You can contact us at +91 94625 64100 for any question or concern. Device Details This is a USB to Serial Converter Module based on PL-2303HX IC Device Specifications Based on PL-2303HX IC 5 Pins - 3.3V, 5.0V, TXD, RXD, GND Can be used to program Arduino Pro Mini. Package Include 1 Piece USB 2.0 to TTL UART Serial Converter Adapter for Arduino, AVR, ARM / Other MCU 5 x Femalre to Femalre Jumper Wires (Note: Wire Colour May Vary) About Us We are a small company based

StarTech.com 2 Port Native ExpressCard RS232 Serial Adapter Card with 16950 UART EC2S952. This 2 Port ExpressCard-based Serial Card lets you add 2 RS232 serial ports to your laptop or ExpressCard equipped desktop computer using an available ExpressCard slot. Featuring 128-byte FIFO communication and a high performance 16C950 UART the ExpressCard Serial Adapter card offers baud rates up to 115.2Kbps which ensures peak communication with your serial peripheral devices. The serial card is designed based on a single-chip architecture (as opposed to cards that use a bridge chip) providing native PCI Express communication for greater performance and reliability as well as reduced power consumption and CPU load. Compatible with ExpressCard 34mm and ExpressCard 54mm card slots the 2 Port Serial ExpressCard includes a slot spacer for greater security while installed

Live Tech PCI Serial Card For Destop PC With Bill & Warranty. Features Build-in 16c550 compatible uart with 16 byte transmit-receive fifo. Fast data rates up to 1 mbytes/sec. Able to support 16c byte fifo, 16c byte fifo),16c byte fifo) compatible uart (not all version) support serial devices. Package (Contents) product with driver cd PAYMENT MODE Paisapay - Credit Card payments, Online Bank Transfer Payments made via Paisapay are subject to confirmation. Orders will only be dispatched once we receive a confirmation e-mail from Paisapay. Cheque or Demand Draft - Payable

CP Serial Converter USB 2.0 To TTL UART 5PIN Module +  Free Dupont line 5 pc female to female! Description:     Name: CP, USB to TTL Module     Baud Rate Range: Mbps     Control chip: CP     Working voltage: 4V-5.25V     Support: Windows 98SE, , XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40     Output voltage: Dual voltage output (3.3V and 5V)     Output indicator: Power indicator, TXD indicator     Output current: 100mA (with current limiting protection)     5 pins for 3.3V, TXD, RXD, GND & 5V   Packaging List:     1 x USB to TTL Module     5 x Dupont Wire

Description The CP is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS-232designs to USB using a minimum of components and PCB space. The CP includes a USB 2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, and asynchronous serial data bus (UART) with full modem control signals

Kootek PL USB to Serial TTL UART Module Converter Adapter. A handy USB to TTL converter based on the PLHX.3 LEDs are on-board to indicate power data reception and data transmission. A 5V and 3.3V output is available--you can power your project directly from the USB port so it functions as a USB power supply too. The 5-pin I O is clearly labelled on the board.Excellent driver support--drivers are available for Windows 98 to Windows 7 (32 bit and 64 bit) Mac OS 8 to OS X (32 bit and 64 bit) and Linux. Even Android is supported!

Description The CP2102 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS-232designs to USB using a minimum of components and PCB space. The CP2102 includes a USB 2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, and asynchronous serial data bus (UART) with full modem control signals

  Description Package Includes: "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">1pcs Uart - WIFI module Serial port WI Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

9 pin Serial and DB25 Parallel Port Combo PCI Card   Features: It can add 1 DB25 Parallel and 2 RS232 Serial ports to your computer: 1x DB25 Parallel (female) Port Data transfer up to 1.5Mbps Support all 3 modes of ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), SPP Ideal for printers, external storage media or parallel port scanners 2x DB9 RS232 Serial (male) Ports Data transfer up to 115200bps (Serial Port) Perfect for connecting serial modems, POS devices, PDAs, digital cameras, printers, ISDN terminal adapters and more, to your low profile system Compliant with PCI rev 2.1 Compatible with standard 16C550 UART with built-in 16 byte transmit-receive FIFO Plug-and-play, automatically select IRQ and I/O address Brand New Product 1 x RS232 Serial + Parallel Port PCI Card 1 x CD Driver       Check out my other items! Be sure to add me to your favourites list ! Kindly mention your complete address including landmark and pincode with mobile and landline phone numbers to help courier to deliver your product on time. Please do not ask for change of address after placing your order. It is not possible

RS232 DB9 9pin Serial DB25 Parallel Port Combo PCI Card   Features: It can add 1 DB25 Parallel and 2 RS232 Serial ports to your computer: 1x DB25 Parallel (female) Port Data transfer up to 1.5Mbps Support all 3 modes of ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), SPP Ideal for printers, external storage media or parallel port scanners 2x DB9 RS232 Serial (male) Ports Data transfer up to 115200bps (Serial Port) Perfect for connecting serial modems, POS devices, PDAs, digital cameras, printers, ISDN terminal adapters and more, to your low profile system Compliant with PCI rev 2.1 Compatible with standard 16C550 UART with built-in 16 byte transmit-receive FIFO Plug-and-play, automatically select IRQ and I/O address Brand New Product 1 x RS232 Serial + Parallel Port PCI Card 1 x CD Driver       Check out my other items! Be sure to add me to your favourites list ! Kindly mention your complete address including landmark and pincode with mobile and landline phone numbers to help courier to deliver your product on time. Please do not ask for change of address after placing your order. It is not possible

logoplacemark { position:inherit; right:0; background-repeat:no-repeat; }.divbody { width:820px; float:none; background-color:rgba(); }.topbar { width:100%; height:105px; background-repeat-x:no-repeat; background-repeat-y:no-repeat; background-repeat:no-repeat; background-image:url(http://i.photobucket.com/albums/jj519/soni991/TopBar_zpsqazeqcpv.png~original); }.bottombar { width:100%; height:85px; background-repeat-x:no-repeat; background-repeat-y:no-repeat; background-repeat:no-repeat; background-image:url(http://i.photobucket.com/albums/jj519/soni991/BotomBar_zpsq0ldzf3v.png~original); }.diva { opacity:0.85; padding-left:40px; border:solid 1px #; margin-bottom:20px; }.policyh2 { color:#; text-shadow:rgb(px 2px 5px; text-rendering:optimizespeed; text-decoration:underline; text-transform:capitalize; font-family:serif; margin-left:65px; margin-top:-50px; }.producth2 { color:#AF; text-shadow:rgb(px 2px 5px; text-rendering:optimizespeed; text-decoration:underline; text-transform:capitalize; font-family:serif; font-size:20pt; margin-left:0; }.policydd { margin-top:-10px; margin-bottom:50px; margin-left:85px; font-family:'Abadi MT Condensed Light', serif, monospace, sans-serif; width:85%; -webkit-border-bottom-right-radius:10px; border-bottom-right-radius:10px; -o-border-bottom-right-radius:10px; -ms-border-bottom-right-radius:10px; -moz-border-radius-bottomright:10px; -webkit-border-top-right-radius:10px; border-top-right-radius:10px; -o-border-top-right-radius:10px; -ms-border-top-right-radius:10px; -moz-border-radius-topright:10px; text-indent:10px; }.productpdd { margin-bottom:50px; margin-left:70px; font-family:'Abadi MT Condensed Light', serif, monospace, sans-serif; width:90%; -webkit-border-bottom-right-radius:10px; border-bottom-right-radius:10px; -o-border-bottom-right-radius:10px; -ms-border-bottom-right-radius:10px; -moz-border-radius-bottomright:10px; -webkit-border-top-right-radius:10px; border-top-right-radius:10px; -o-border-top-right-radius:10px; -ms-border-top-right-radius:10px; -moz-border-radius-topright:10px; text-indent:10px; margin-top:-15px; -webkit-border-top-left-radius:10px; border-top-left-radius:10px; -o-border-top-left-radius:10px; -ms-border-top-left-radius:10px; -moz-border-radius-topleft:10px; -webkit-border-bottom-left-radius:10px; border-bottom-left-radius:10px; -o-border-bottom-left-radius:10px; -ms-border-bottom-left-radius:10px; -moz-border-radius-bottomleft:10px; border-image-source:initial; border-image-slice:initial; border-image-width:initial; border-image-outset:initial; border-image-repeat:initial; border:1px solid #; } Title Enter Title Here Description Module Features:     Taiwan's latest embedded WIFI Programme (Taiwan original IC)     Ultra- small size, the size of only mm (size of a fingernail, not only the smallest serial WIFI module, but also the height of the shortest serial WIFI module)     Ultra- low power WIFI module (excellent power)     Start time 1 sec     Perfect support for b / g / n protocol     WIFI encryption to support the market all the way     Without any user-driven, the user need only as a common microcontroller serial port     Support AP (hot) / STA (WIFI node)     Standby TCP Server/TCP Client/UDP Server/UDP Client工作方式     Support DHCP DNS HTTP advanced application-layer protocol     It supports serial AT command configuration (supports serial configuration tools)     LAN support

FREE SHIPPING, We ship All over India 2 Ports COM 9 Pin Serial PCI-E PCI Express Card Adapter High Speed PCI EXPRESS SERIAL CARD 1 YEAR WARRANTY 1-Lane (x1) PCI-Express with transfer rate 2.5Gb/s full duplex channel 2-Serial port with transfer rate up to 1.0Mbyte/s Compliant with PCI-Express Revision 1.0a Fast data rates up to 1.0 MBytes/sec Compatible with Standard 16C550 UART with 16-Byte Transmit-Receive FIFO Connectors: 2 x 9-pin external Serial Ports - DB9 male Supports Windows , ME, , NT 4.0, XP, Vista, 7,  Linux and DOS operating system ANY QUE RY   contact   THROUGH   CONTACT SELLER FACILITY

     Features & Technical Specifications Serial Port Build-in 16C550 compatible UART with 16 byte transmit-receive FIFO, Fast data rates up to 1 Mbytes/sec, Able to support 16C650 (32 byte FIFO), 16C750 (64 byte FIFO), 16C850 (128 byte FIFO) compatible (Not all version) Support Serial Devices Automated Teller machine, Bar-Code Reader, Digital Camera, Digitizing Tablet, External modem, Finger Print, Identification, Infra-Red Transceiver, ISDN T/A, Multi-Modem Dial-up Server etc • Easy Plug & installation automatically selects IRQ and I/O address • Supports PCI IRQ sharing-saves valuable resources for other expansion card • Support 32-bit PCI Bus, PCI Specification 2.1 • Support Re-mapping to Legacy Address • Supports more than one card into system This product comes with One Year Manufacturer's Warranty for any manufacturing defect. Note: Warranty seal should not be tear off. We ship via Power Ship Program which is of premium service provided by India. Your purchased product will be dispatched using one of the below reputed logistics providers: Aramex, DTDC, BlueDart, DHL, Fedex We are committed to deliver your order with good quality packaging within given time frame. Octroi: Dear Buyers please take a note that Octroi Charges are not included

2016 Newest PCI-E PCI Express Dual Serial DB9 RS232 2 Ports Controller  Adapter Card  Features: 100% brand new and high quality 1-Lane (x1) PCI-Express with transfer rate 2.5Gb/s Full Duplex channel. Compliant with PCI-Express Revision 1.0a. Fully Plug & Play compatible. Compatible with Standard 16C550 UART with 16-Byte Transmit-Receive FIFO. Fast Data Rates up to 1-MBytes/Sec. Support RS-232 Hardware Flow Control. Driver support for MS Windows 98SE / Me / NT4.0 / 2000 / XP / Server 2003 / Vista, Linux, DOS. Driver link: www.uxcell.com/public/a14030600ux0081.rar Specifications: Product Name: PCI-E Controller Card Port 2 x Serial DB9 Port Total Size: 7.2x 12 x 2 cm Main Color: Green Main Material: Plastic, Metal, Electronic Parts Package includes: 1 x PCI-E Controller Card 1* CD DRIVER Pictures above are indicative only Kindly mention your Complete Address with   landmark and the Pin Code with Mobile and   Landline Contact Numbers to help us to deliver   the product on time. No address change request   would be entertain once the order is placed.   Kindly mention your Complete Address with   landmark and the Pin Code with Mobile and   Landline Contact Numbers to help us to deliver   the product on time. No address change request   would be entertain once the order is placed.     Payment Details Payment is accepted by Paisa Pay only.  Paisa Pay is the Safest mode of Payment.

Features: Support Remote control mode, remote device can control PIO (pin or modify settings) by AT commander when connected. Automatically enters transparent serial mode after device is paired and connected. Armed with firmware V526 and it supports 8 ADC channels and one PMW channel. Support Apple Notification Center Service (ANCS). Ultra low standby power consumption 90uA-800uA,vast connection distance of 100 feet. Super fast reaction rate of 0.4 seconds. Support Android, Apple, PC, MAC. Specifications: Bluetooth version: V4.0 Connection distance: 100 ft Power consumption: 90uA-800uA Reaction rate: 0.4s Soc: CC MFI: No need Color: Black Material: Glass Fiber & Plastic & Iron Weight: 1g / 0.03oz Dimensions: mm / in Package weight: 5g / 0.18oz Package size: mm / in Package List: 1 * HM-10 CC BLE Bluetooth to UART Transceiver Module

ESP ESP-12E Serial WiFi Wireless Transceiver SMD Module with ADC, SPI and Extra Pinouts ESPE is an enhanced version ESP, improve peripheral circuitry increases impedance matching, the signal output is better, whether it is stable or anti-jamming capability, have been greatly improved! For users before selecting the ESP-12, it does not matter even if the product has been made, enhanced version is fully compatible with previous firmware, the pin has added six IO ports on the basis of the ESP-12, SPI leads. ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. Features: SDIO 2.0, SPI, UART 32-pin QFN package Integrated RF switch, balun, 24dBm PA, DCXO, and PMU Integrated RISC processor, on-chip memory and external memory interfaces Integrated MAC/baseband processors Quality of Service management I2S interface for high fidelity audio applications On-chip low-dropout linear regulators for all internal supplies Proprietary spurious-free clock generation architecture Integrated WEP, TKIP, AES, and WAPI engines Solutions: Supports APSD for optimal VoIP applications Patented spurious noise cancellation algorithm for integration

ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functi ons from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. Corresponding Interface: SDIO 2.0, SPI, UART 32-pin QFN package Integrated RF switch, balun, 24dBm PA, DCXO, and PMU Integrated RISC processor, on-chip memory and external memory interfaces Integrated MAC/baseband processors Quality of Service management I2S interface for high fidelity audio applications On-chip low-dropout linear regulators for all internal supplies Proprietary spurious-free clock generation architecture Integrated WEP, TKIP, AES, and WAPI engines Specification: b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLLs, regulators, DCXO and power management units +19.5dBm output power

Firmware Details: Version: ESP-01 Firmware:0.9.4 Default Baudrate: (configurable) VCC:3.3v Logic level:3.3v   The SOC has Integrated TCP/IP protocol stack.   ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.   ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.   Corresponding Interface:     SDIO 2.0, SPI, UART     32-pin QFN package     Integrated RF switch, balun, 24dBm PA, DCXO, and PMU     Integrated RISC processor, on-chip memory and external memory interfaces     Integrated MAC/baseband processors     Quality of Service management     I2S interface for high fidelity audio applications     On-chip low-dropout linear regulators for all internal supplies     Proprietary spurious-free clock generation architecture     Integrated WEP, TKIP, AES, and WAPI engines   Specification:     b/g/n     Wi-Fi Direct (P2P), soft-AP     Integrated TCP/IP protocol stack     Integrated TR switch, balun, LNA, power amplifier and matching network     Integrated PLLs, regulators, DCXO and power management units     +19.5dBm output power

Description ESP   ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.     Features:   - SDIO 2.0, SPI, UART -  32-pin QFN package -  Integrated RF switch, balun, 24dBm PA, DCXO, and PMU -  Integrated RISC processor, on-chip memory and external memory interfaces -  Integrated MAC/baseband processors -  Quality of Service management -  I2S interface for high fidelity audio applications -  On-chip low-dropout linear regulators for all internal supplies -  Proprietary spurious-free clock generation architecture -  Integrated WEP, TKIP, AES, and WAPI engines     Solutions -  Supports APSD for optimal VoIP applications -  Patented spurious noise cancellation algorithm for integration