-
loading
Ads with pictures

Wifi module


Top sales list wifi module

India
Product Description This is a wifi solution based on IC ESP from Espressif, very price competitive wifi module, and also great function. Bring your project to the internet of things easily! Features: Very competitive price AP, STA, AP+STA modes available. Very simple AT commands, easy to use. internal LWIP interface. Only four pins interface, VCC-3V3, GND, TXD and RXD. Current firmware V091 for all stock, new reserved reset and CH_PD (for updating) pins available, you can refresh the firmware now. All using new ESPex new chip, old chip is not available anymore. Pin description Pin High Status Low Status Note VCC, GND Use standalone power source, or large capacitor, all power of this module from external TXD, RXD The serial port RST - restart CH_PD Flash boot and Update Mode - chip enable, so always connect to high status with VCC GPIO0 - Update mode GPIO2 - - GPIO 15 (when avaialble) NC Flash boot Mode Only for a few version, Wi07-3 GPIO 12 GPIO 13 GPIO 14 GPIO 16 Hardware RST No need any pull-up AT commands §   Baud rate: (from v0.90, v0.80 and older: ) §   The AT part of the command can be written large or small, however, the following command must always be written large §   Make sure that before, after and within the command no spaces (space) occur General AT commands AT command Description Parameter Example AT Test command, are always "OK" back AT AT + RST Reset of the module, the module's boot messages followed by  ready  back AT + RST AT + GMR Querying the Firmware Version AT + GMR WiFi AT commands AT command Description Parameter Example AT + CWMODE =  Setting the WiFi mode  1) Station 1 =  2 = Access Point  3 = Both AT + CWMODE = 1 AT + CWMODE? Query WiFi mode AT + CWMODE? AT + CWMODE =? Query of possible settings for WiFi mode AT + CWMODE =? AT + CIPMUX = Using multiple connections 0 = single compound  1 = Multiple connections AT + CIPMUX = 1 AT + CIPMODE = Setting the data mode 0 = transparent  1 = Data AT + CIPMODE = 1 AT + CIPMODE? Output of the data set mode AT + CIPMODE? WiFi commands (Station / client) AT command Description Parameter Example AT + CWJAP =, Connecting to WiFi network ssid "SSID"  pass "password" AT + CWJAP = "makerday", "M4k3rd4y" AT + CWJAP? Output of the currently connected WiFi network AT + CWJAP? AT + CWLAP Output of available APs  2) AT + CWLAP AT + CWQAP Closes the connection to an access point AT + CWQAP AT + CIFSR Issue its own IP address AT + CIFSR WiFi commands (Access Point) AT command Description Parameter Example AT + CWSAP =, [,,] Set the access point parameters  3) ssid "SSID"  pass "password"  chan "channel"  enc "Encryption"  (0 = Open  1 = WEP  WPA_PSK 2 =  3 = WPA2_PSK  4 = WPA_WPA2_PSK) AT + CWSAP = "makerday", "M4k3rd4y" 5.3 AT + CWSAP? Output the current settings for the AP AT + CWSAP? AT + CWLIF Lists stations connected IPs 4) AT + CWLIF WiFi commands (IP Client) AT command Description Parameter Example AT + CIPSTATUS Output status of the IP connection (s) AT + CIPSTATUS AT + CIPSTART =,, Creating an IP connection with AT + CIPMUX = 0 type: "TCP" or "UDP"  address "IP address"  port: TCP / UDP port AT + CIPSTART = "TCP", " AT + CIPSEND = Sending data over a single compound  5) len: Data length AT + CIPSEND = AT + CIPCLOSE Close a single TCP or UDP connection AT + CIPCLOSE AT + CIPSTART =,,, Creating an IP connection with AT + CIPMUX = 1 id: 0-4  type: "TCP" or "UDP"  address "IP address"  port: TCP / UDP port AT + CIPSTART = "TCP", " AT + CIPSEND =, Send data via merhere compounds 6) id: 0-4  len: Data length AT + CIPSEND = AT + CIPCLOSE = Close one of several TCP or UDP connection id: 0-4 AT + CIPCLOSE = 1 WiFi commands (IP server) AT command Description Parameter Example AT + CIPSERVER = 1 [,] Starts the TCP server port: TCP port AT + CIPSERVER = AT + CIPSERVER = 0 Terminates the TCP server AT + CIPSERVER = 0 AT + CIPSTO = Sets timeout for TCP server timeout = s AT + CIPSTO = 180 AT + CIPSTO? Specifies timeout of TCP server AT + CIPSTO? If a TCP server is started, it can handle up to 5 simultaneous connections. Other compounds can be created, but only served when others are closed or terminated by timeout. The module incoming data directly with the prefix  + IPD  issued: + IPD,   OK   + IPD, 0.6: ON   OK The output is divided as follows: + IPD,,, It is  id  the ID of the compound (0-5),  len  the length of the resulting data packet and  data  contains the data received from the client. In the above example as first sends compound 1 the value   and then connect the string 0  ON     Powered by Turbo Lister
₹ 62.900
See product
India
HLK-RM04 Serial Uart to Ethernet Switch WIFI Module with antenna and HLK-RM04 UART to WIFI  Module Test Base Board   Description Product features. 
 1). UART to WIFI Wireless Module , UART to Ethernet Module , Ethernet to WIFI Module , UART server module , Make your Serial Device connected to the Internet easily. Double Data Rate All transparently. Guarantee the highest limit of Usability and Compatibility. 
 2). The module integrated m adaptive Ethernet interface.The highest baud rate up to Kbps of the serial communication.and the highest rate of TTL serial port is 500KBPS. 
 3). Each module
₹ 230.000
See product
India
Product Description This is a wifi solution based on IC ESP from Espressif, very price competitive wifi module, and also great function. Bring your project to the internet of things easily! Features: Very competitive price AP, STA, AP+STA modes available. Very simple AT commands, easy to use. internal LWIP interface. Only four pins interface, VCC-3V3, GND, TXD and RXD. Current firmware V091 for all stock, new reserved reset and CH_PD (for updating) pins available, you can refresh the firmware now. All using new ESPex new chip, old chip is not available anymore. Pin description Pin High Status Low Status Note VCC, GND Use standalone power source, or large capacitor, all power of this module from external TXD, RXD The serial port RST - restart CH_PD Flash boot and Update Mode - chip enable, so always connect to high status with VCC GPIO0 - Update mode GPIO2 - - GPIO 15 (when avaialble) NC Flash boot Mode Only for a few version, Wi07-3 GPIO 12 GPIO 13 GPIO 14 GPIO 16 Hardware RST No need any pull-up   AT Commands Format Baud rate at (new line) use option "send new line" or 'carriage return' for each command x is the commands Set Inquiry Test Execute AT+ = AT+ ? AT+ =? AT+ AT+CWMODE= AT+CWMODE? AT+CWMODE=? - Set the network mode Check current mode Return which modes supported - Commands carefully there are must be no any spaces between the " and IP address or port Commands Description Type Set/Execute Inquiry test Parameters and Examples AT general test basic - - - - AT+RST restart the module basic - - - - AT+GMR check firmware version basic - - - - AT+CWMODE wifi mode wifi AT+CWMODE= AT+CWMODE? AT+CWMODE=? 1= Sta, 2= AP, 3=both, Sta is the default mode of router, AP is a normal mode for devices AT+CWJAP join the AP wifi AT+ CWJAP =, AT+ CWJAP? - ssid = ssid, pwd = wifi password AT+CWLAP list the AP wifi AT+CWLAP AT+CWQAP quit the AP wifi AT+CWQAP - AT+CWQAP=? AT+ CWSAP set the parameters of AP wifi AT+ CWSAP=,,, AT+ CWSAP? ssid, pwd, chl = channel, ecn = encryption; eg. Connect to your router: AT+CWJAP="www.shanrittech.com","helloworld"; and check if connected: AT+CWJAP? AT+CWLIF check join devices' IP wifi AT+CWLIF - - AT+ CIPSTATUS get the connection status TCP/IP AT+ CIPSTATUS,,,, = client or server mode AT+CIPSTART set up TCP or UDP connection TCP/IP 1)single connection (+CIPMUX=0) AT+CIPSTART=,,; 2) multiple connection (+CIPMUX=1) AT+CIPSTART=,, - AT+CIPSTART=? id = 0-4, type = TCP/UDP, addr = IP address, port= port; eg. Connect to another TCP server, set multiple connection first: AT+CIPMUX=1; connect: AT+CIPSTART=4,"TCP","X1.X2.X3.X AT+CIPMODE set data transmission mode TCP/IP AT+CIPMODE= AT+CIPSEND? 0 not data mode, 1 data mode; return "Link is builded" AT+CIPSEND send data TCP/IP 1)single connection(+CIPMUX=0) AT+CIPSEND=; 2) multiple connection (+CIPMUX=1) AT+CIPSEND=, AT+CIPSEND=? eg. send data: AT+CIPSEND=4,15 and then enter the data. AT+CIPCLOSE close TCP or UDP connection TCP/IP AT+CIPCLOSE= or AT+CIPCLOSE AT+CIPCLOSE=? AT+CIFSR Get IP address TCP/IP AT+CIFSR AT+ CIFSR=? AT+ CIPMUX set mutiple connection TCP/IP AT+ CIPMUX= AT+ CIPMUX? 0 for single connection 1 for multiple connection AT+ CIPSERVER set as server TCP/IP AT+ CIPSERVER= [,] mode 0 to close server mode, mode 1 to open; port = port; eg. turn on as a TCP server: AT+CIPSERVER=, check the self server IP address: AT+CIFSR=? AT+ CIPSTO Set the server timeout AT+CIPSTO= AT+CIPSTO?
₹ 59.900
See product
India
logoplacemark { position:inherit; right:0; background-repeat:no-repeat; }.divbody { width:820px; float:none; background-color:rgba(); }.topbar { width:100%; height:105px; background-repeat-x:no-repeat; background-repeat-y:no-repeat; background-repeat:no-repeat; background-image:url(http://i.photobucket.com/albums/jj519/soni991/TopBar_zpsqazeqcpv.png~original); }.bottombar { width:100%; height:85px; background-repeat-x:no-repeat; background-repeat-y:no-repeat; background-repeat:no-repeat; background-image:url(http://i.photobucket.com/albums/jj519/soni991/BotomBar_zpsq0ldzf3v.png~original); }.diva { opacity:0.85; padding-left:40px; border:solid 1px #; margin-bottom:20px; }.policyh2 { color:#; text-shadow:rgb(px 2px 5px; text-rendering:optimizespeed; text-decoration:underline; text-transform:capitalize; font-family:serif; margin-left:65px; margin-top:-50px; }.producth2 { color:#AF; text-shadow:rgb(px 2px 5px; text-rendering:optimizespeed; text-decoration:underline; text-transform:capitalize; font-family:serif; font-size:20pt; margin-left:0; }.policydd { margin-top:-10px; margin-bottom:50px; margin-left:85px; font-family:'Abadi MT Condensed Light', serif, monospace, sans-serif; width:85%; -webkit-border-bottom-right-radius:10px; border-bottom-right-radius:10px; -o-border-bottom-right-radius:10px; -ms-border-bottom-right-radius:10px; -moz-border-radius-bottomright:10px; -webkit-border-top-right-radius:10px; border-top-right-radius:10px; -o-border-top-right-radius:10px; -ms-border-top-right-radius:10px; -moz-border-radius-topright:10px; text-indent:10px; }.productpdd { margin-bottom:50px; margin-left:70px; font-family:'Abadi MT Condensed Light', serif, monospace, sans-serif; width:90%; -webkit-border-bottom-right-radius:10px; border-bottom-right-radius:10px; -o-border-bottom-right-radius:10px; -ms-border-bottom-right-radius:10px; -moz-border-radius-bottomright:10px; -webkit-border-top-right-radius:10px; border-top-right-radius:10px; -o-border-top-right-radius:10px; -ms-border-top-right-radius:10px; -moz-border-radius-topright:10px; text-indent:10px; margin-top:-15px; -webkit-border-top-left-radius:10px; border-top-left-radius:10px; -o-border-top-left-radius:10px; -ms-border-top-left-radius:10px; -moz-border-radius-topleft:10px; -webkit-border-bottom-left-radius:10px; border-bottom-left-radius:10px; -o-border-bottom-left-radius:10px; -ms-border-bottom-left-radius:10px; -moz-border-radius-bottomleft:10px; border-image-source:initial; border-image-slice:initial; border-image-width:initial; border-image-outset:initial; border-image-repeat:initial; border:1px solid #; } Title Enter Title Here Description Module Features:     Taiwan's latest embedded WIFI Programme (Taiwan original IC)     Ultra- small size, the size of only mm (size of a fingernail, not only the smallest serial WIFI module, but also the height of the shortest serial WIFI module)     Ultra- low power WIFI module (excellent power)     Start time 1 sec     Perfect support for b / g / n protocol     WIFI encryption to support the market all the way     Without any user-driven, the user need only as a common microcontroller serial port     Support AP (hot) / STA (WIFI node)     Standby TCP Server/TCP Client/UDP Server/UDP Client工作方式     Support DHCP DNS HTTP advanced application-layer protocol     It supports serial AT command configuration (supports serial configuration tools)     LAN support
₹ 580
See product
India
Overview WBoard EX is a unique Arduino board with WIFI module, XBee socket, nRF24L01 + module interface, micro SD card interface, electronic brick interface and ATmega32U4 chip. WBoard EX boot procedure is based on Arduino Leonardo. With WIFI module, the board can achieve wireless communication with TCP / IP protocol. Via XBee and nRF24L01 + or WIFI can be used for wireless control with functions covering from smart home to remote control to meet various needs of different projects. Documents Please visit our  wiki  page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials. Technical support For technical support, please open a ticket on  Itead Support System.
₹ 990
See product
India
ESP WiFi Module ESP WiFi Module This interesting module is a lot of fun for hobbyists and students who are interested
₹ 550
See product
India
Serial WiFi module based on SoC ESP.  It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all  Wi Fi  networking functions from another application processor. ESP based ESP-12E module has powerful on-board processing and enhanced storage capabilities (~4MB flash) that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. You will need minimal external circuitry for the module and the entire solution. The module comes with default AT command firmware installed and you can program it to run C code as well as Lua code by upgrading the firmware with another.
₹ 325
See product
India
Serial WiFi module based on SoC ESP8266.  It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all  Wi Fi  networking functions from another application processor. ESP8266 based ESP-12E module has powerful on-board processing and enhanced storage capabilities (~4MB flash) that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. You will need minimal external circuitry for the module and the entire solution. The module comes with default AT command firmware installed and you can program it to run C code as well as Lua code by upgrading the firmware with another.
₹ 299
See product
India
ESP serial WIFI module adapter plate with ESP-12 ESP serial WIFI module adapter plate with ESP-12 This is ESP-12 with adapter plate. You can also add 3.3v regulator to this board. Click Here  to view our other products Contact Us Shipping Payments Feedback We ship our products through reputed shipping services like Fedex, Bluedart, Aramex, DTDC etc. as per availability of the service at customers place. We accept payments only through Paisa Pay. Paisa Pay:The Easiest Way to pay for most of the items is on . We only ship the goods on the address registered with Paisa Pay. If you have any query, please feel free to contact us through "Ask a Question" link under seller information. OR Email Us at: OR Call at: +91- Your feedback is important for us to grow our business on , so please do leave a feedback. If after purchase you have any issues with the product kindly contact us and let us know, leaving a negative feedback will not solve the problem. Like Us on  Facebook 
₹ 600
See product
India
logoplacemark { position:inherit; right:0; background-repeat:no-repeat; }.divbody { width:820px; float:none; background-color:rgba(); }.topbar { width:100%; height:105px; background-repeat-x:no-repeat; background-repeat-y:no-repeat; background-repeat:no-repeat; background-image:url(http://i.photobucket.com/albums/jj519/soni991/TopBar_zpsqazeqcpv.png~original); }.bottombar { width:100%; height:85px; background-repeat-x:no-repeat; background-repeat-y:no-repeat; background-repeat:no-repeat; background-image:url(http://i.photobucket.com/albums/jj519/soni991/BotomBar_zpsq0ldzf3v.png~original); }.diva { opacity:0.85; padding-left:40px; border:solid 1px #; margin-bottom:20px; }.policyh2 { color:#; text-shadow:rgb(px 2px 5px; text-rendering:optimizespeed; text-decoration:underline; text-transform:capitalize; font-family:serif; margin-left:65px; margin-top:-50px; }.producth2 { color:#AF; text-shadow:rgb(px 2px 5px; text-rendering:optimizespeed; text-decoration:underline; text-transform:capitalize; font-family:serif; font-size:20pt; margin-left:0; }.policydd { margin-top:-10px; margin-bottom:50px; margin-left:85px; font-family:'Abadi MT Condensed Light', serif, monospace, sans-serif; width:85%; -webkit-border-bottom-right-radius:10px; border-bottom-right-radius:10px; -o-border-bottom-right-radius:10px; -ms-border-bottom-right-radius:10px; -moz-border-radius-bottomright:10px; -webkit-border-top-right-radius:10px; border-top-right-radius:10px; -o-border-top-right-radius:10px; -ms-border-top-right-radius:10px; -moz-border-radius-topright:10px; text-indent:10px; }.productpdd { margin-bottom:50px; margin-left:70px; font-family:'Abadi MT Condensed Light', serif, monospace, sans-serif; width:90%; -webkit-border-bottom-right-radius:10px; border-bottom-right-radius:10px; -o-border-bottom-right-radius:10px; -ms-border-bottom-right-radius:10px; -moz-border-radius-bottomright:10px; -webkit-border-top-right-radius:10px; border-top-right-radius:10px; -o-border-top-right-radius:10px; -ms-border-top-right-radius:10px; -moz-border-radius-topright:10px; text-indent:10px; margin-top:-15px; -webkit-border-top-left-radius:10px; border-top-left-radius:10px; -o-border-top-left-radius:10px; -ms-border-top-left-radius:10px; -moz-border-radius-topleft:10px; -webkit-border-bottom-left-radius:10px; border-bottom-left-radius:10px; -o-border-bottom-left-radius:10px; -ms-border-bottom-left-radius:10px; -moz-border-radius-bottomleft:10px; border-image-source:initial; border-image-slice:initial; border-image-width:initial; border-image-outset:initial; border-image-repeat:initial; border:1px solid #; } Title 2.4G 4DB module antenna IPX IPEX WIFI module omnidirectional antenna high-gain internal antenna Description Simple But Efficient Antenna Technical Parameter's Friendly reminder: the placement of the antenna, far away from the PCB board, near the edge of the housing. Product Introduction Basic parameters Network Type: IEEE n or b / g Frequency range: 2.4 to 2.49 GHz Maximum gain: 4dBi (SONY gum) can be attached to the housing top antenna VSWR: Less than 1.5 Input Impedance: 50 Ohms Rated power: 30 dBm Use feeders: 1.13mm wire length 150MM Antenna Interface: IPEX Interface Antenna size: 48MM * 7.5MM * 1.0MM pStandard IEEE n and b/g Frequency Range 2.4 to 2.49 GHz Peak Gain 4dBi VSWR Feed Impedance 50 Ohms Power Handling 30 dBm Interface One set of soldering pads for 50 ohm, 1.13mm cable Antenna Dimensions 48MM*7.5MM*1.0MM Feedback Please Feel Free to Contact us for any trouble you face while usage. Leaving negative remark would lead to no solution rather it would bar the user for any future purchase from our shop on . We do our best to resolve your issue. Though we understand that you should have well knowhow about the product before you purchase it. Many products we dont provide tutorial as we keep this
₹ 220
See product
India
.logoplacemark { position:inherit; right:0; background-repeat:no-repeat; }.divbody { width:820px; float:none; background-color:rgba(0,0,0,0.00); }.topbar { width:100%; height:105px; background-repeat-x:no-repeat; background-repeat-y:no-repeat; background-repeat:no-repeat; background-image:url(http://i1265.photobucket.com/albums/jj519/soni991/TopBar_zpsqazeqcpv.png~original); }.bottombar { width:100%; height:85px; background-repeat-x:no-repeat; background-repeat-y:no-repeat; background-repeat:no-repeat; background-image:url(http://i1265.photobucket.com/albums/jj519/soni991/BotomBar_zpsq0ldzf3v.png~original); }.diva { opacity:0.85; padding-left:40px; border:solid 1px #000000; margin-bottom:20px; }.policyh2 { color:#282625; text-shadow:rgb(72, 72, 73) -2px 2px 5px; text-rendering:optimizespeed; text-decoration:underline; text-transform:capitalize; font-family:serif; margin-left:65px; margin-top:-50px; }.producth2 { color:#AF1243; text-shadow:rgb(72, 72, 73) -2px 2px 5px; text-rendering:optimizespeed; text-decoration:underline; text-transform:capitalize; font-family:serif; font-size:20pt; margin-left:0; }.policydd { margin-top:-10px; margin-bottom:50px; margin-left:85px; font-family:'Abadi MT Condensed Light', serif, monospace, sans-serif; width:85%; -webkit-border-bottom-right-radius:10px; border-bottom-right-radius:10px; -o-border-bottom-right-radius:10px; -ms-border-bottom-right-radius:10px; -moz-border-radius-bottomright:10px; -webkit-border-top-right-radius:10px; border-top-right-radius:10px; -o-border-top-right-radius:10px; -ms-border-top-right-radius:10px; -moz-border-radius-topright:10px; text-indent:10px; }.productpdd { margin-bottom:50px; margin-left:70px; font-family:'Abadi MT Condensed Light', serif, monospace, sans-serif; width:90%; -webkit-border-bottom-right-radius:10px; border-bottom-right-radius:10px; -o-border-bottom-right-radius:10px; -ms-border-bottom-right-radius:10px; -moz-border-radius-bottomright:10px; -webkit-border-top-right-radius:10px; border-top-right-radius:10px; -o-border-top-right-radius:10px; -ms-border-top-right-radius:10px; -moz-border-radius-topright:10px; text-indent:10px; margin-top:-15px; -webkit-border-top-left-radius:10px; border-top-left-radius:10px; -o-border-top-left-radius:10px; -ms-border-top-left-radius:10px; -moz-border-radius-topleft:10px; -webkit-border-bottom-left-radius:10px; border-bottom-left-radius:10px; -o-border-bottom-left-radius:10px; -ms-border-bottom-left-radius:10px; -moz-border-radius-bottomleft:10px; border-image-source:initial; border-image-slice:initial; border-image-width:initial; border-image-outset:initial; border-image-repeat:initial; border:1px solid #000000; } Title 2.4G 4DB module antenna IPX IPEX WIFI module omnidirectional antenna high-gain internal antenna Description Simple But Efficient Antenna Technical Parameter's Friendly reminder: the placement of the antenna, far away from the PCB board, near the edge of the housing. Product Introduction Basic parameters Network Type: IEEE 802.11n or 802.11 b / g Frequency range: 2.4 to 2.49 GHz Maximum gain: 4dBi (SONY gum) can be attached to the housing top antenna VSWR: Less than 1.5 Input Impedance: 50 Ohms Rated power: 30 dBm Use feeders: 1.13mm wire length 150MM Antenna Interface: IPEX Interface Antenna size: 48MM * 7.5MM * 1.0MM pStandard IEEE 802.11n and 802.11 b/g Frequency Range 2.4 to 2.49 GHz Peak Gain 4dBi VSWR Feed Impedance 50 Ohms Power Handling 30 dBm Interface One set of soldering pads for 50 ohm, 1.13mm cable Antenna Dimensions 48MM*7.5MM*1.0MM Feedback Please Feel Free to Contact us for any trouble you face while usage. Leaving negative remark would lead to no solution rather it would bar the user for any future purchase from our shop on . We do our best to resolve your issue. Though we understand that you should have well knowhow about the product before you purchase it. Many products we dont provide tutorial as we keep this
₹ 265
See product
India
  Description Package Includes: "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")"> 1pcs  "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">Esp8266 ESP-12 wifi module esp8266 serial wifi coexistence full AP test board Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order
₹ 749
See product
India
Description Package Includes: "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">1pcs  "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">ESP serial WIFI module Original test plate + WIF sending and receiving wireless module Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order
₹ 1.799
See product
India
  Description Package Includes: "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">1pcs  "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">ESP8266 serial WIFI module Original test plate + WIF sending and receiving wireless module Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order
₹ 1.799
See product
India
  Description Package Includes: "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">1pcs Uart - WIFI module Serial port WI Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order
₹ 619
See product
India
This is WiFi serial transceiver module, based on ESP SoC.   The SOC has Integrated TCP/IP protocol stack   We have a set of documents
₹ 775
See product
India
Introduction: EMW is the new module that design by  MXCHIP  in the . For the embedded products applications, it focus on the ultra-low power low cost. This Wi-Fi wireless LAN module. It combines the latest Wi-Fi technology and microcontroller technology, within IEEEb/g/n wireless communications and a variety of energy-saving mode, widely used
₹ 999
See product
India
DESCRIPTION Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well.    We do sell these on a breakout, but maybe you wanna just put this
₹ 339
See product
India
The ESP modules offer a very affordable way to expand microcontroller projects with an Internet connection. The good range, ease of configuration and especially the low price, these modules are very attractive for IoT projects of all kinds. Data sheet and related link will be provided once you buy the product and email with subject as esp to Plz watch video for more details https://www.youtube.com/watch?v=7zD92FXQc8Q&feature=youtu.be Note: All inputs are not 5V tolerant of ESP and may be used only with 3.3V. For the sample arduino code you need to send a mail to with subject as "esp code"  after buying All Shipping through powership Label Signal VCC 3.3V (3.6V max) Supply Voltage GND Ground TXD Transmit Data (3.3V level) RXD Receive Data (3.3V level!) CH_PD Chip Power down: (LOW = Power down active) GPIO0 General Purpose I / O 0 GPIO2 General Purpose I / O 2 RST Reset (LOW = Reset active)
₹ 375
See product
Mahadevapura (Karnataka)
Product Description Smallest do about mm, the size of a fingernail. Easily embedded into any product   Powerful internal protocol run LWIP   Supports three modes: AP, STA, AP + STA coexistence mode   AT commands perfect simple and efficient, allowing you to develop easier.
₹ 45.000
See product
India
Product Description Smallest do about mm, the size of a fingernail. Easily embedded into any product   Powerful internal protocol run LWIP   Supports three modes: AP, STA, AP + STA coexistence mode   AT commands perfect simple and efficient, allowing you to develop easier. This Item is Sealed Item so I cannot give guarantee/warranty for this product.  I can give guarantee if i am selling
₹ 45.000
See product
India
DESCRIPTION ABOUT This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. FEATURES AND USAGE This is the XBee WiFi Module with wire antenna from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of , the XBee WiFi creates new wireless opportunities for energy management, process and factory automation, wireless sensor networks, intelligent asset management and more. Focused on the rigorous requirements of these wireless device networks, the module gives developers IP-to-device and device-to-cloud capability. XBee modules offer developers tremendous flexibility and are available in surface mount and through-hole form factors. The XBee WiFi shares a common footprint with other XBee modules. This allows different XBee technologies to be drop-in replacements for each other. As a member of the XBee family, the XBee WiFi combines hardware with software for a complete modular solution. XBee WiFi modules are designed to communicate with access points in existing infrastructures. Developers can use AT and API commands for advanced configuration options. SPECIFICATIONS 3.3V @ 40mA 250kbps Max data rate 2mW output (+3dBm) 400ft (120m) range Built-in antenna Fully FCC certified 6 10-bit ADC input pins 8 digital IO pins 128-bit encryption Local or over-air configuration AT or API command set Application Ideas: Remote controlled Boe-Bot robot Wireless data acquisition Remote signal beacon for adventure seekers Remote industrial monitoring Lighting control Keyless entry INCLUSIONS 1 x XBEE WIRELESS COMMUNICATION MODULE (WIRE ANTENNA) We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/
See product
India
Description: ESP-01 ESP- is an ideal choice for hobbyist to start experimenting with IOT. The dimension of this module is 25mm x 15mm, with simple pin connections (standard 2×4 pin headers), using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the WiFi module. ESP ESP-01 Serial WIFI Transceiver Module is a cheap and easy way to connect to internet via WIFI to any microcontroller platforms like Arduino. You can use AT commands to connect to WiFi networks and open TCP/IP connections (without need to have TCP/IP stack running
₹ 295
See product
India (All cities)
The D1R2 esp8266 shield is made for uno board that uses the Arduino layout with an operating voltage of 3.3V. The D1R2 shield come with all pins and D1R2 shield Provide 3.3v max output support also has a micro usb connection esp8266, D1r1 arduino wifi shield,D1r1,esp8266 wifi module,arduino wifi module Fast Home Delivery COD Availebale Buy Online Link here https://robotbanao.com/products/d1-r2-wifi-esp8266-shield-arduino-compatible-development-board-d1-uno
See product
Lalbahadur Nagar (Andhra Pradesh)
http://www.wallystech.com Dual-core ARM 64bit A53@1.0GHz Processor 512MB DDRL3L System Memory 4MB NOR Flash, 128MB NAND Flash 2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate Support BT5.1 Two PCIe2.0 connector can support QCN90xx production Absolute Maximum Rating Parameter Rating Unit Supply Voltage 12 V Operating Temperature Range -40 to +70 C Storage Temperature Range -45 to +105 C Operating Humidity Range 5 to +95 (non-condensing) % Hardware Specifications Symbol Parameter CPU Qualcomm-AtherosIPQ5018 CPU Frequency Dual-core ARM 64 bit A53 @1.0 GHz processor System Memory 512MB DDR3L 16-bit interface with 32-bit memory bus design Ethernet Port 4 x 1Gbps Ethernet Ports or 1X2.5Gbps Ethernet Port 1 x1Gbps Ethernet Port NGFF Slot 2 X M.2 (NGFF) E Key Socket with MiniPCIe 2.0(For WiFi Module) EMMC 4G/8G(optional) USB /header 1x USB 3.0 Port POE NA DC Jack 12V power supply LED header LED for power,Wifi strength Serial Port support Wireless On-board 2x22.4GHz MU-MIMO OFDMA 802.11b/g/n/ax,max 23dBm per chain 2x IPEX Connectors Bluetooth BT5.1 Nor Flash 4MB Nand Flash 128 MB DDR 512MB Dimension 185mm x 116mm
See product
India
ESP Wifi Module Serial Wireless Send Receive Transceiver ESP-12 Description: Chip: ESP Type: ESP-12 Package Included: 1 X ESP-12
₹ 450
See product
India
ESP Wifi Module Serial Wireless Send Receive Transceiver ESP-12 Description: Chip: ESP Type: ESP-12 Package Included: 1 X ESP-12 Shipping:: We normally ship within 2-3 business days through Bluedart, Aramex, DTDC or Speed post (for remote locations).
₹ 450
See product
India
ESP serial Wi-Fi UART wireless IOT module 3.3V AP+STA   For RasPi, arduino, AVR, other MCU ESP serial wifi Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description esp serial wifi:   ESP is a highly integrated chip designed for the needs of a new connected IoT world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. Note:   This module requires a 3.3V supply for VCC, and 3.3V logic. It is not 5V tolerant. Connecting Rx or Tx on 5V Arduino may destroy this module. You must use a logic level converter, or a 3.3V Arduino. Also the 3.3V supply on the Arduino Uno has inadequate current capability to power this module. You must provide a separate, higher 3.3V supply (about 300mA or better)   Features ESP serial wifi: ·         SDIO 2.0, SPI, UART ·         Integrated RF switch, balun, 24dBm PA, DCXO, and PMU ·         Integrated RISC processor, on-chip memory and external memory interfaces ·         Integrated MAC/baseband processors ·         Quality of Service management ·         I2S interface for high fidelity audio applications ·         On-chip low-dropout linear regulators for all internal supplies ·         Proprietary spurious-free clock generation architecture ·         Integrated WEP, TKIP, AES, and WAPI engines   Specification ESPEX: ·             b/g/n ·             Wi-Fi Direct (P2P), soft-AP ·             Integrated TCP/IP protocol stack ·             Integrated TR switch, balun, LNA, power amplifier and matching network ·             Integrated PLLs, regulators, DCXO and power management units ·             +19.5dBm output power
₹ 319
See product
India
ESP remote serial Port WIFI wireless module : ESP (ESP12) Module Board Its Another Arduino with free WIFI Client & Access Point FULL GPIO's Out Test Board with RGB leds, Leds to all GPIO's  Header For Sensors & Output. Jumper For Flashing Mode LDR TO Analog Input Test With Mobile / Lua Loader With PC INSTALL LUA FIRMWARE / INSTALL ARDUINO CODE ON IT / USE IT FOR WiFI ENABLE YOUR HOUSE (MAIL ME FOR HELP) How to use: 1 install IOT. APK
₹ 595
See product
India
ESP ESP-201 Remote Serial Port WIFI Transceiver Wireless Module Description: Can be use as full IO module Package included: 1 x ESP-201 Remote Serial Port WIFI Transceiver Wireless Module
₹ 400
See product

Free Classified ads - buy and sell cheap items in India | CLASF - copyright ©2024 www.clasf.in.