IC WIRELESS 4 CHANNEL RF REMOTE CONTROL IN INDIA

BRAND NEW IC Wireless 4 -Channel RF Remote control Transmitter & Receiver Key Kits / Tx - Rx Modules                                                                   Remote control: 1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4.Modulation mode: ASK (Amplitude Modulation) 5.Transmitting frequency: 315MHZ (SAW frequency stabilization) 6.Transmission distance:M (Open field the receiver sensitivity -100dbm) 7.Encoder types: fixed code 8. The frequency of this product is 315 mhz. With decoding receiver board 1.The operating voltage DC5V, receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 2.Size: mm There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Module function description: This module has no self-locking function, simple implementation, wireless remote control by pressing a key, The receiver outputs a high level when the corresponding key is pressed. When key is released, the output goes to normal, and each channel is independent of each other. The output of high level can directly drive the relay. VT foot is receiving signal terminal. There is no detailed information. Package Contents: 1 x 4 channel Remote control 1 x 4 channel Receiver Shipping through BlueDart/Aramex/FedEx