Amplifier pcb x

PCB for High power output PA Series Amplifier, provides superb & Power full sound quality. With  2SCSA output devices the amp will put out close to 400 WATTS @ 8 OHMS and 800 Watt @ 4 OHMS.  Size 94 mm X 260 mm. FR4 Glass epoxy 1.6 mm THK Board 70  Microns copper. Included Schematic & BOM. Qty- 02 Nos. (TWO ONLY) PCB. FOR STEREO Note:- Amplifier Output Power 400 Watt @ 8 Ohms and 80 Watt @ 4 Ohms. We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Rs. only) Contact details:- E-Mail: Mob. No.

This is a high-quality PCB (printed circuit board) for TI LM4780 60 watts + 60 watts stereo audio amplifier IC. You can build a very high-quality professional Audio Amplifier at a fraction of the cost of Commercial Amplifiers. The board is without parts and IC. This is a stereo PCB. You can buy audio IC from the market. If you need parts also please let me know. Thanks

Universal Stereo  Preamplifier PCB with Tone Control        Build your own high end stereo control preamplifier.      This PCB has been designed for audiophils who enjoy un distorted music. Glass epoxy, Green masked, Lead tinned pads & Legend printed bare PCB. Volume / Balance / Bass /Treble / Balance / Loudness / Source select switch. Switchable Input signal selector for 2 sources (CD / Aux) 2 Operational amplifiers

PCB Board Universal - Dot vero 6x4" (Inch) General purpose board primarily used for components & IC for quick testing, sample circuite, experiments, learning etc.

specification 1. Average Power Output/CH into 4 Ohms, 4 Channels Driven /10Hz~40kHz, 0.5% THD 85W X 4 or 170W X 2Ch /1kHz, 10% THD 250W X 4Ch or 500W X 2Ch (Total Harmonic Distortion (THD) Amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 1% is inaudible.) 2. Low Pass Filter (VARIABLE) 40Hz ~ 150kHz 3. High Pass Filter (VARIABLE) 80Hz ~ 1.2kHz 4. Output of Bridged (BTL) Operation into 4 Ohms /1kHz, 1% THD Watts 5. Frequency Response (-1dB) 10Hz ~ 40kHz 6. Signal to Noise Ratio ("A" WTD) >100dB 7. Input Sensitivity 100mV ~3V 8. Input Impedance 22k Ohms 9. Operation Voltage (Negative Ground) DC 12V 10. Speaker Impedance / Stereo Driven 4 Ohms 11. Fuse Rating 40A X 1 12. Dimension (WxHxD)mm 260X58X320 Weight 3.2KG

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Amplifier Kit with Main heat sink and Power Supply Kit): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply Transformer required: Volt 5 Amps- NOT INCLUDED) With Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 2 x 150 Watts @ 8 Ohms and 2 x 250 Watts @ 4 Ohms. Required Power Supply transformer Volts, 10 Amps (Not Included). Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- El. cr ) Fastron connectors Silpad insulators Silver Mica compensation capacitors (Manufacturer:Kemet/ACE) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors. Electrolytic Capacitors (Manufacturer: Keltron) Note:- Amplifier Output Power 2 x 150 Watt @ 8 Ohms and 2 x 250 Watt @ 4 Ohms (Power supply: Volt 10 Amps)  Contact details:- E-Mail: Any Query Please call on: Mob. No. 

The Best Deal on   !!!! New Cyber Sonic Hearing Enhancer Aid Machine Sound Amplifier:: Product Features:: CYBER SONIC HEARING AID WITH PROTECTIVE CASE FOR BETTER So small hides right behind ear Amplify sounds up to 40 decibels Auto noise reduction Low battery consumption Weight less than 10 grams 6 volume levels Can adjust to either ear Work with 3 button cell battery INCLUDED 3 attachments With keeping box:: In The Box:: 1 x Cyber Sonic Hearing enhancer Aid Machine Sound Amplifier 3 x button cell battery INCLUDED 3 x attachments 1 x keeping box Feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback. Your feedback is important for us to grow our business on , so please do leave feedback.. Contact Details Questions? If you have any query feel free to contact us on PH:  +91 OR e-mail us on . OR can contact me through by "Ask Seller A Question" Shipping Details We ship anywhere

New Cyber Sonic Hearing Enhancer Aid Machine Sound Amplifier:: Product Features:: CYBER SONIC HEARING AID WITH PROTECTIVE CASE FOR BETTER So small hides right behind ear Amplify sounds up to 40 decibels Auto noise reduction Low battery consumption Weight less than 10 grams 6 volume levels Can adjust to either ear Work with 3 button cell battery INCLUDED 3 attachments With keeping box:: In The Box:: 1 x Cyber Sonic Hearing enhancer Aid Machine Sound Amplifier 3 x button cell battery INCLUDED 3 x attachments 1 x keeping box Feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback. Your feedback is important for us to grow our business on , so please do leave feedback.. Contact Details Questions? If you have any query feel free to contact us on PH:  +91 OR e-mail us on . OR can contact me through by "Ask Seller A Question" Shipping Details We ship anywhere

New Cyber Sonic Hearing Enhancer Aid Machine Sound Amplifier:: Product Features:: CYBER SONIC HEARING AID WITH PROTECTIVE CASE FOR BETTER So small hides right behind ear Amplify sounds up to 40 decibels Auto noise reduction Low battery consumption Weight less than 10 grams 6 volume levels Can adjust to either ear Work with 3 button cell battery INCLUDED 3 attachments With keeping box:: In The Box:: 1 x Cyber Sonic Hearing enhancer Aid Machine Sound Amplifier 3 x button cell battery INCLUDED 3 x attachments 1 x keeping box

1.6W Mono Audio Amplifier kit is based on TDA, which is class AB power amplifier with a wide range of supply. Power supply: 5 ~ 12 VDC Output: 1.6 W, 4 Ohm / 1 W, 8 Ohm Low crossover distortion, soft clipping Onboard PRESET to adjust volume Terminal pins for connecting power supply, input and output ON/OFF PCB mounted slide switch for power supply Power-On LED indicator Four mounting holes of 3.2 mm each PCB dimensions 36 mm x 52 mm DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram  Note: KOTEQ offers custom design and modification services for most of our  products, please contact us  for  specific requirement.

Mini Stereo Audio Amplifier kit is designed for portable radio players and other building block projects.  It  is based on TDA IC. Power supply: upto 12 VDC Output: 1 W, 8 Ohm for 12 VDC / 20 mW, 32 Ohm for 3 VDC Input resistance 100 KOhm Low crossover distortion, Low quiescent current Onboard PCB mount 3.5 mm stereo jack for audio-in Onboard Presets to adjust volume Terminal pins for connecting power supply and outputs Power-On LED indicator Four mounting holes of 3.2 mm each PCB dimensions 41 mm x 56 m m DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram  Note: KOTEQ offers custom design and modification services for most of our  products, please contact us  for  specific requirement.

The Tiny Audio Amplifier kit is a good choice for battery operation.  It is based on National Semiconductor LM386 IC. Wide power supply input 6 to 12 VDC 500 mW output @ 8 Ohms load Low quiescent current drain 4 mA IC Onboard preset for volume adjust Berg connector for connecting power supply, audio signal and speaker Onboard power indication LED On/Off PCB mounted slide switch for power supply Four mounting holes of 3.2 mm each PCB dimensions 41 mm x 41 mm DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram   Note: KOTEQ offers custom design and modification services for most of our  products, please contact us   for  specific requirement.

1 X LMwatts Mono Amplifier Board, EASP186 Specification: Output power: 68W (4 ohms) 68W Cont. Avg. Output Power into 4Ω at VCC = ±28V 38W Cont. Avg. Output Power into 8Ω at VCC =±28V 50W Cont. Avg. Output Power into 8Ω at VCC = ±35V Signal-to-Noise Ratio ≥ 92dB  PCB Size: mm APPLICATIONS:  • Component stereo  • Compact stereo   • Self-powered speakers   • Surround-sound amplifiers  • High-end stereo TVs Package:   1 X LMwatts Mono Amplifier Board

2 X LMwatts Mono Amplifier Board, EASP186 Specification: Output power: 68W (4 ohms) 68W Cont. Avg. Output Power into 4Ω at VCC = ±28V 38W Cont. Avg. Output Power into 8Ω at VCC =±28V 50W Cont. Avg. Output Power into 8Ω at VCC = ±35V Signal-to-Noise Ratio ≥ 92dB  PCB Size: mm APPLICATIONS:  • Component stereo  • Compact stereo   • Self-powered speakers   • Surround-sound amplifiers  • High-end stereo TVs Package:  2  X LMwatts Mono Amplifier Board PLEASE LEAVE YOUR VALUABLE FEEDBACK