Antenna 1 x belt

PRODUCT DESCRIPTION Antenna for increase the network or signal of any 3g modem which have CRC9 jack Device Condition Brand New, High Gain, High Quality & Genuine Product Installation Quick & Simple installation, No software required. USAGE Suitable for all 3G modem which have CRC9 jack or port LIKE HUWAEI, Device Signal Booster antenna for 3G Datacard/Modem Base Magnetic base/stand for avoiding the abrasion of your table GAIN 12 dbi VSWR ≤1.5 COLOUR BLACK FREQUENCY HSDPA/UMTS (MHz/Mhz/850Mhz), GSM/GPRS/EDGE (MHz) Frequency Range for 3G (MHz- MHZ) POLARISATION VERTICAL INPUT IMPEDENCE 50 OHMS CONNECTOR CRC9 Cable Length 3 Meter (Suitable for placed inside/outside the room) Network support Support all GSM (Both 2G/3G) network service Package Include  1 x 3G CRC9 Antenna with Magnetic base

- IN WARRANTY, Working perfect, 1 year old, 6 months warranty remaining. - With box, bill, accessories, very rarely used, like new. - 4 x Antenna, 1 x Gig WAN port, 4 x Gig LAN port, 1 x USB port. - Support both 2.4 GHz and 5 GHz bands, good long WiFi coverage.

NRF 2.4Ghz NRF24L01+PA+LNA SMA Antenna Wireless Transceiver Module for Arduino Description: This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system. This nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier) Specification: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception Package Includes: 1 x NRF24L01+PA+LNA Wireless Transceiver Module 1 x SMA Antenna Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

b/g/n 2.4GHz 9dBi RP-SMA Male OMNI-Directional High-Gain Screw-On Swivel Antenna for Routers or Network Card Adapters Standard SMA female connector, compatible with most wireless devices like AP, wireless router, PCI wireless network card, IP Cameras etc. Omni-Directional  Max gain up to 9DBI, provides more signals Connector: RPSMA Surrounding temperature: -40°C to 80°C Gain: 9DBI Length: approx. 37 cm 1 X Antenna The antenna attaches directly to the external antenna connector of your Wireless Access Point(Router) or Wireless Network Adapter. Simply unscrew your current antenna and screw on the Hi-Gain antenna and you're ready to go! Feedback Policy:- Your Positive Feedback is important to us so we humbly request you to leave a positive feedback along with 5 Star Rating for each feedback parameter. For any reason if you are not satisfied with your purchase contact us to resolve your concern before leaving a negative or neutral feedback. Customer Care:- If You Have Any Questions, Concerns, Please Feel Free Contact Us. messages: Simply click on the link "Ask seller a question" located on top right corner

NRF24L01+PA+LNA 1.1KM Range Module for Serious Long Range Wireless Projects This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost and Of course long range upto meters !! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier)   Specifications: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception (Multiceiver) ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket. Which includes everything you want to start with your NRF24L01+ RF Communication. Package Contains: 1 x NRF24L01+PA+LNA 1 x Long Range SMA connector Antenna For Any Technical Clarification. Please Click on Ask Seller ? We are Here to Help you. Any Questions Answered

TPU Back Case with Hand belt for iPod Nano 7 - Red Free scratchgard screen protector with this case     Product Specifications / Features: ·          Material - TPU ·          Precision modelled case to perfectly fit the product        ·          Made of TPU material ·          Anti-dust and anti-slide protection ·          Durable and washable ·          Professional design, without any special smell and defects ·          Popular and fashionable ·          Environmental Friendly Material Kit Contains: 1.     Case   2.    1 X Scratchgard for Protector SEALED PACKAGING                   Please inquire for custom made screen protectors   Check out my  other items ! Be sure to add me to your  favourites list ! If you have any questions or suggestions before or after the installation, please email us through or email to or call us on between 10 am to 6.30 pm Mondays through Saturday. We are happy to help you.   For free installation for tablet, iPad, laptop protectors and skins

Features: This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier) Specification: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception Package included: 1 x  NRF24L01+PA+LNA Module 1 x  SMA Antenna

DESCRIPTION ABOUT This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. FEATURES AND USAGE This is the XBee WiFi Module with wire antenna from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of , the XBee WiFi creates new wireless opportunities for energy management, process and factory automation, wireless sensor networks, intelligent asset management and more. Focused on the rigorous requirements of these wireless device networks, the module gives developers IP-to-device and device-to-cloud capability. XBee modules offer developers tremendous flexibility and are available in surface mount and through-hole form factors. The XBee WiFi shares a common footprint with other XBee modules. This allows different XBee technologies to be drop-in replacements for each other. As a member of the XBee family, the XBee WiFi combines hardware with software for a complete modular solution. XBee WiFi modules are designed to communicate with access points in existing infrastructures. Developers can use AT and API commands for advanced configuration options. SPECIFICATIONS 3.3V @ 40mA 250kbps Max data rate 2mW output (+3dBm) 400ft (120m) range Built-in antenna Fully FCC certified 6 10-bit ADC input pins 8 digital IO pins 128-bit encryption Local or over-air configuration AT or API command set Application Ideas: Remote controlled Boe-Bot robot Wireless data acquisition Remote signal beacon for adventure seekers Remote industrial monitoring Lighting control Keyless entry INCLUSIONS 1 x XBEE WIRELESS COMMUNICATION MODULE (WIRE ANTENNA) We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

WiFi Antenna Cable 10ft - RP-SMA Female to N Male Pigtail Connector Adapter Jack. This N Type Male to RP-SMA Male Cable Adapter could be used to connect router PCI card access point etc. It will bring you much convenience. Very easy to use convenient to carry. Package: 1 x N Type to RP-SMA Cable Connector

WiFi Antenna Cable 25ft- RP-SMA Female to N Male - Pigtail Connector Adapter Jack. This N Type Male to RP-SMA Male Cable Adapter could be used to connect router PCI card access point etc. It will bring you much convenience. Very easy to use convenient to carry. Package: 1 x N Type to RP-SMA Cable Connector

SainSonic RF Coax WIFI Network Coaxial Plug Radio Antenna CCTV KT-016 BNC Bulkhead Feed Through-Isolated Adapter Sliver. Specifications: This is one item of new insulated bulkhead adapter which can be used to take co-axial cable BNC connectors into rack equipment internals via a front panel. These are ex-equipment but are very clean and difficult to tell from new. These are 50 Ohm types which can be seen from the thickness of the dielectric. (The 75 Ohm types have a visibly thinner dielectric part) The hole diameter required is 13mm with a flatted section which is 12mm from one side to the other. More features: Connectors: BNC Bulkhead Feed Through-Isolated Adapter Impedance: 50 Omega Nickel-Plated Machined Brass Construction Gold-Plated Contacts - Teflon Insulator Package list: 1 x SainSonic BNC Bulkhead Feed Through-Isolated Adapter

Walnut GSM/GPRS Modem USB The GSM/GPRS Modem USB uses SIM900A based Quad band MHz GSM / GPRS module. It can be connected to PC or laptop via  USB directly or to a microcontroller UART using TTL levels. The modem consists of all the external circuit required to start experimenting with the SIM900A module like the power regulation, external antenna, SIM Holder, etc. Modem is built with Quad Band GSM/GPRS based SIM900A module from SIMCOM. It works on frequencies MHz. SIM900A can search these bands automatically. The frequency bands can also be set by AT Commands. The baud rate is configurable from through AT command. The GSM/GPRS Modem is having internal TCP/IP stack to enable you to connect with internet via GPRS. Best suited for GSM based Microcontroller Projects (better than SIM300 and other GSM Modems) **** Can be Use for Bulk SMS sending using Compatible software. Features: U ses the extremely popular SIM900A GSM module. Accepts commands through On board USB serial. Also can accept commands from microcontroller UART. Provides serial TTL interface for easy and direct interface to microcontrollers. Works on 9V-18V 1 A SMPS supply. Speaker and Microphone pins onboard for voice Communication. On board SMA connector with GSM antenna. On board Power, Network, Ring and status LED’s for indication. Can do basic functions which can be done via normal phone like calling, send sms, access data through GPRS etc. Plug and play device. Can accept commands through Hyper Terminal. Ft232 R  Based USB communication- Better and Faster than other Cheap USB Drivers. Supports Windows / Vista / Server / XP / SE / MaC OS X / Mac OS 9,Linux 3.x.x / 2.x.x. Small size. NOTE: The modem consumes current of nearly 1A during transmission; please make sure that your power supply can handle such currents. Modems are pretested before shipping. We recommend to use a 12V DC 2 Amps power supply & Use USB Cable to Connect GSM MODEM to PC or Laptop. Please be very gentle with the SIM card tray while inserting or removing the SIM card. Also don't tighten the screws of the antenna too much, just make sure it is connected properly without exerting too much force to tighen the antenna. This Product Includes: ·          GSM/GPRS Modem USB ·          2 dbi Rubber duck antenna ·          USB Cable ·          USB Driver (FT232R) Please Visit for Download AT Commands & USB Drivers: http://www.walnutinnovations.com/gsm-usb-modem.html Rules and Regulations: 1. All Items

Walnut GSM/GPRS Modem USB The GSM/GPRS Modem USB uses SIM900A based Quad band MHz GSM / GPRS module. It can be connected to PC or laptop via  USB directly or to a microcontroller UART using TTL levels. The modem consists of all the external circuit required to start experimenting with the SIM900A module like the power regulation, external antenna, SIM Holder, etc. Modem is built with Quad Band GSM/GPRS based SIM900A module from SIMCOM. It works on frequencies MHz. SIM900A can search these bands automatically. The frequency bands can also be set by AT Commands. The baud rate is configurable from through AT command. The GSM/GPRS Modem is having internal TCP/IP stack to enable you to connect with internet via GPRS. Best suited for GSM based Microcontroller Projects (better than SIM300 and other GSM Modems) **** Can be Use for Bulk SMS sending using Compatible software. Features: U ses the extremely popular SIM900A GSM module. Accepts commands through On board USB serial. Also can accept commands from microcontroller UART. Provides serial TTL interface for easy and direct interface to microcontrollers. Works on 9V-18V 1 A SMPS supply. Speaker and Microphone pins onboard for voice Communication. On board SMA connector with GSM antenna. On board Power, Network, Ring and status LED’s for indication. Can do basic functions which can be done via normal phone like calling, send sms, access data through GPRS etc. Plug and play device. Can accept commands through Hyper Terminal. Ft232 R  Based USB communication- Better and Faster than other Cheap USB Drivers. Supports Windows / Vista / Server / XP / SE / MaC OS X / Mac OS 9,Linux 3.x.x / 2.x.x. Small size. NOTE: The modem consumes current of nearly 1A during transmission; please make sure that your power supply can handle such currents. Modems are pretested before shipping. We recommend to use a 12V DC 2 Amps power supply & Use USB Cable to Connect GSM MODEM to PC or Laptop. Please be very gentle with the SIM card tray while inserting or removing the SIM card. Also don't tighten the screws of the antenna too much, just make sure it is connected properly without exerting too much force to tighen the antenna. This Product Includes: ·          GSM/GPRS Modem USB ·          2 dbi Rubber duck antenna ·          USB Cable ·          USB Driver CD (FT232R) Please Visit for Download AT Commands & USB Drivers: http://www.walnutinnovations.com/gsm-usb-modem.html Rules and Regulations: 1. All Items

16dBi 2.4 GHz RP-SMA Wireless WLAN Antenna Aerial WIFI For Adapter or Router 100% Brand new and high quality Flexible WiFi antenna For wireless router and WLAN PCI card Tilt and swivel design 16dbi Omni Directional Antenna. Max gained 16dbi, provide more signals RP-SMA female connector 2.4GHz Wireless WLAN Antenna Aerial Specifications: Connector: RP-SMA (female) Material: Plastic Frequency: 2.4GHz Gain: 16dBi Size:37.5x1.3cm Color: Black Package includes: 2.4GHz 16dBi Wireless Antenna  x  1

acc Payment Shipping Policy Return & Warranty Reply Feedback FAQ Apple   > Audio & Video   > Camera   > Cell Phone   > Laptop   > Video Game   > UK Store   > Other   > Smart TV Box MINIX NEO X8-H Quad Core Cortex A9r4 Android 16G XBMC HDMI WIFI 4K Click an image to Enlarge Description Payment Shipping Policy Return & Warranty Reply Feedback FAQ Specifications:  1. Operating System: Android . Chipset: Amlogic S802-H 3. CPU: Quad-Core Cortex A9r4 4. Processor Frequency: 96MHz-MHz  5. GPU: Octa-Core Mali-. Menu Language: English, Greek, Danish, Norwegian, Dutch, Arabic etc. 7. RAM/Memory Type: DDR3 SDRAM  8. Built-In Memory / RAM: 2GB  9. Storage: 16GB 10. Max Extended Capacity: Up to 32GB  11. Supports Card Type: SD  12. External HDD: 2TB 13. Wi-Fi: B / G / N, 2.4GHz And 5GHz Dual Band  14. Bluetooth Version: VG Function: Yes, Support USB 3G Dongle (Not Included) 16. Wireless Keyboard/Mouse: 2.4GHz  17. Audio Formats: MP3, WMA, APE, FLAC, OGG, AC3, DTS, AAC etc.  18. Video Formats: RM, PMP, AVC, FLV, VOB, MPG, DAT, MPEG etc. 19. Audio Codecs: DTS, AC3, LPCM, FLAC, HE-AAC etc. 20. Video Codecs: MPEG-1, MPEG-2, MPEG-4, H.264, VC-1 etc. 21. Picture Formats: JPEG, BMP, PNG, GIF, TIFF, Jps(3D), Mpo(3D)  22. Output Resolution: P  23. HDMI: . Audio Outputl: HDMI,Optical Audio,3.5mm Jack  25. Video Output: HDMI 26. USB: USB 2.0, Micro USB  27. Plug: US Optional  28. Power Supply: V 29. Dimensions: (5.12 x 5.12 x x 13 x 2)cm (L x W x H) 30. Weight: oz / 598g 31. Color: Black 32. Material: PC Package Includes: 1 x HDMI Cable 1 x Remote Controller 1 x USB Cable 1 x US Adapter 1 x Antenna 1 x TV Box Payment: 1.We accept PayPal only. 2.NOTE: Checkout procedure is sent to your registered email address. All payments must go through our checkout. echeck is held up to 4 days. We accept US issued credit card only. Payments are expected within 4 days. Unpaid item will be filed without receiving payment. 3. Multiple auctions purchase? Wait until all of the auctions have ended, then complete the checkout received