Arm handcuff two

Description: Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two Two on-board relay which can switch up to 7Amps. Relays terminals (COM, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free-wheeling diode which will further protect your microcontroller from relay kick back. This is a 5V 2-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.    Features: 1.     Equipped with high-current relay 7A@250VAC / 10A@24VDC.  2.     It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc. 3.     High quality screw terminals (Terminal Block) provided (COM, NC, NO) for quick and easy connection. 4.     Free wheeling diode to protect your microcontroller. 5.     Input Signal Pin connected to Burg stick for easy accessibility. 6.     LED Status indicators to indicate the relay ON/OFF status. 7.     Mounting holes provided. Package Contains: 1.      1 x Two channel 5V relay Module.    

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two (2) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and Transistor will further protect your micro-controller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - BC 547 Transistor used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has 2 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, LPCMHz ARM Microcontroller LPC-pin Flash 512kbyte 60MHz ARM Microcontroller FEATURES:- 64-pin High-Performance ARM Microcontroller Flash Program Memory: 512 kbytes SRAM Data Memory: 32 kbytes I/O Pins: 47 Timers: Two 32-bit A/D Converter: Two 10-bit Eight Channel DAC: 10-bit Real-Time Clock (RTC): Independent Power and Dedicated 32kHz Input. Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, New Original LPCMHz ARM  Microcontroller LPC-pin Flash 512kbyte 60MHz ARM Microcontroller FEATURES:- 64-pin High-Performance ARM Microcontroller Flash Program Memory: 512 kbytes SRAM Data Memory: 32 kbytes I/O Pins: 45 Timers: Two 32-bit A/D Converter: 10-bit Fourteen Channels DAC: 10-bit Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

SAM3X8EA 32bit ARM Contex-M3 Due R3 Board Control  Arduino Due R3 AT91SAM3X8E   Description The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Features: 1. Microcontroller ：AT91SAM3X8E   2. Operating Voltage：3.3V  3. Input Voltage (recommended)：7-12V  4. Input Voltage (limits)：6-16V  5. Digital I/O Pins ：54 (of which 12 provide PWM output)  6. Analog Input Pins：12 7. Analog Outputs Pins：2 (DAC) 8. Total DC Output Current on all I/O lines ：130 mA 9. DC Current for 3.3V Pin：800 mA   10. DC Current for 5V Pin：800 mA  11. Flash Memory：512 KB all available for the user applications  12. SRAM：96 KB (two banks: 64KB and 32KB)   13. Clock Speed：84 MHz            Driver installation and usage procedure: ·                      Install  Arduino IDE ß  (click here) no extra driver needed for this card. ·                      Connect the board to computer, OS will auto detect ARDUINO DUE ·                      If the board is not auto detected, go to hardware device manager and choose update driver than choose advanced option “install from specific location” and point to the directory where your Arduino IDE is installed e.g. ”C:/program files/arduino-1.0.2/drivers” ·                      Launch Arduino IDE, select board as “arduino DUE” ·                      Select the com port OS created for the card(control panel  à  device manager) ·                      Open basics  à  blink sketch and upload. Package: 1 MCU BOARD  + 1 USB cable

Description Package Includes: 1 Piece new  5V 2 Two Channel Relay Module With optocoupler for Arduino PIC ARM DSP AVR It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new 12V  Two Channel Relay Module With optocoupler for Arduino PIC ARM DSP AVR It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new 12V  Two Channel Relay Module With optocoupler for Arduino PIC ARM DSP AVR It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Product Description ARM Core benefits The Due has a 32-bit ARM core that can outperform typical 8-bit microcontroller boards. The most significant differences are: A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. (for more information look  int type  page). CPU Clock at 84Mhz. 96 KBytes of SRAM. 512 KBytes of Flash memory for code. a DMA controller, that can relieve the CPU from doing memory intensive tasks. Pin Mapping:  SAM3X Pin Mapping page Product includes 1x arduino board 1x USB cable Summary Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Outputs Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Powered by Turbo Lister

Product Description ARM Core benefits The Due has a 32-bit ARM core that can outperform typical 8-bit microcontroller boards. The most significant differences are: A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. (for more information look  int type  page). CPU Clock at 84Mhz. 96 KBytes of SRAM. 512 KBytes of Flash memory for code. a DMA controller, that can relieve the CPU from doing memory intensive tasks. Product includes 1x arduino board 1x USB cable Summary Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Outputs Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Powered by Turbo Lister

I2C RTC DS AT24C32 Real Time Clock Module For AVR ARM PIC This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for datalogging, cl ock-building, time stamping, timers and alarms, etc. The DS is the most popular RTC, and works best with 5V-based chips such as the Arduino. Features: Brand new and high quality. This is the DS Real Time Clock developed by one of our designer. The module comes fully assembled and pre-programmed. The DS is accessed via the I2C protocol. Two wire I2C interface. Hour:Minutes: Seconds AM/PM. Day Month, Date – Year. DS based RTC with LIR battery (Battery include). 1Hz output pin. 56 Bytes of Non-volatile memory available to user. Item size: mm Net weight: 7g Note: The DS is simple and inexpensive but not a high precision device. It may lose or gain up to 2 seconds or more a day. For a high-precision, temperature compensated alternative. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Monitor stand with dual arms Can support two monitors upto 27 inches Can be mounted on desk by drilling Can be placed anywhere with base mounting.

Two months old Android 4.1 1ghz arm cortex a9 3d graphic processing 7 inch wvga Multi touch capacitive screen Dual cam 2.0mp/0.3mp 8gb internal 32gb expendable 1gb ddr3ram Full hd Wifi Mini hdmi/micro usb mah battery with earphone & keyboard

Amiduos is a fastest emulator ,which can run any android app on windows platform ,be it any version of windows i.e windows7,windows8 or windows 10. Now no need of dual-booting ,you can switch between two O.S using AMIDuOS only. AMIDuOS uses virtualization technology ,so you can easly switch between two O.S, you can even pin Android apps to the Start Menu for ease of access. Virtualization also facilitates easy file sharing between Windows and Android.So files can be trasferred easily between both the platforms. AMIDuOS also supports SD card emulation and allows you to configure the SD card using an easy-to-use configuration tool.AMIDuOS provides a complete Android tablet experience with multitouch and gesture support for pinch and zoom, along with a full-featured software keyboard. It also supports compass and GPS functionality, allowing map navigation by multitouch. FEATURES OF AMIDuOS: 1. Application Compatibility: It can run any android app,which is there on playstore. AMIDuOS is also ARM v7 compatible, so it can run most popular ARM applications as well. 2. Performance: AMIDuOS supports 3D acceleration, so you can enjoy a superior Android gaming experience in Windows. It uses Windows OpenGL drivers for improved frame rates to support even the most graphics-intensive games. 3. Full Android Experience: It provides full android experience ,It runs fast, looks crisp and sharp and performs with ease because it is 100% native Android running on your Windows hardware. 4. Tablet and Desktop Feature: It provides complete tablet and desktop features. It has full hardware support including keyboard shortcuts. Compass and Gps functionality is also embedded in it. 5. Storage and File Sharing: File sharing between Windows and Android is also supported in AMIDuOS, so you can share pictures, videos and music between both OS modes with ease. AMIDuOS also supports SD card emulation and allows you to configure the SD card size with an easy-to-use configuration tool. System specs: 1. x86 processor. 2. 32 or 64-bit Windows 7/8/8.1. 3. OpenGL 3.0 and above. 4. Hardware Virtualization Technology should be enabled in BIOS. 5. Minimum 2GB of system RAM, though 3GB is recommended for best performance. 6. Minimum 2GB of hard disk free space. iblogtechs.com