Avr development board

With this board you can develop and prototype with ATMEGA16/ATMEGA pin) microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User buttons and status LEDs. The bridge rectifier allow this board to be powered with both AC and DC power supply adapters.   FEATURES AVR Development Board for Atmel ATMEGA ISP Socket for Flashing On board Regulated Power Supply 5v,12v supplys Easy to test with Burg Connecters wires An RS232 Serial Port 7Seg Mulitplexed Display DC Power Supply Connector(12v Ac or Dc) READY INTERFACE For LCD display 2linex16Character 24Cxx (I2C) (EEPROM) RTC (DS LED array Matrix Key Pad 4 Interrupt Switches +12v Relay (one) Package Content   AVR Development Board (WITH CHIP MAX232) Burg Connecters 20 Nos Female to Female.

See our ratings Add this shop to my favorites ATtiny13 AVR Development Board Core Board Minimum System ₹ Availability:

Universal Development Board for Arduino, , PIC, AVR and ARM7, Raspburry Pi   (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL       Product Overview   1.     About Digital and Analog IO Interfacing Board                                                                    If you are learning any microcontroller than input and output circuit is always important to experiment with any microcontroller. Digital and Analog IO Board is suitable for quick experiment with any microcontroller.   2.     Features Digital and Analog IO Interfacing Board having a following features:                                                               ·          Eight LEDs ·          Four Switches ·          One LDR (Light Dependent Resistor) (Light Sensor) ·          One Temperature Sensor (LM35) (Sensor) ·          One Variable Resistor (Preset/POT) (Sensor) ·          One Infrared receiver (TSOP) (Remote Control Sensor) ·          One Buzzer ·          One Relay Categories into Inputs/Outputs 1.        Digital Inputs ·          Switches ·          Infrared receiver (TSOP.        Analog Inputs ·          Variable Resistor ·          LDR ·          Temperature Sensor 3.       Digital and Analog Outputs ·          LEDs ·          Buzzer ·          Relay Dimensions (LxWxH) - Cms: 6.5 CM X 6.5CM Datasheet:  http://www.mediafire.com/view/6c3dmdhpw3rlwdh/Digital_and_Analog_IO_Board.pdf

This is a complete development kit for beginners. No need to keep adding on peripherals! Lots to learn, all modules are isolated, user can connect any peripheral to any  port! We have also made complete text and video tutorials for this board!   Check  Development Kit Wiki Page  . This is one of our best sellers!   Complete schematic, code libraries and tutorials are available on our wiki page!   Check Development Kit Wiki Page for schematics, sample codes and tutorials Note: We are not re-sellers of these kits, we are makers and to help you build we have made awesome video tutorials check them out.   For technical support comment below the product wiki page we will be more than glad to help!     Package Contents:   Development Board with following Modules, ICs and Interfaces  Micrcontroller AT89S52 Serial Communication with MAX232 Eight 5mm LEDs Eight Switches

Package Contents   1 x PIC development Board with Free USB cable and CD containing software examples.   External Power supply NOT Included.    Contact Details   Have any Queries, Feel free to contact us anytime   Ph: +91-   or email us:   or contact us through by clicking "Ask seller a question"   Feedback Details   In case, you are not satisfied with the item or have any questions or complaints, please contact us before leaving a Feedback.   Leaving Negative or Neutral Feedback will not solve a problem,   We are always willing to solve the problems of buyers.   "Your feedback is very important for us to grow our business on , so please do leave positive feedback"    The PIC development board is a microcontroller board based on the PIC16F877. It has 33 input/output pins and two PWM outputs, 8 (10 bit) analog inputs, a works upto 20 MHz speed. A USB connection is available for programming and UART (communication with the PC), an external power jack is provided for high current motor applications etc. A Reset button is present. A 4 x 4 key matrix is provided for keyscan applications. A 16 x 2 LCD with programmable backlight is provided. A Piezo Buzzer is present. A 4 digit 7 segment common cathode display is populated for display multiplexing example. A onboard potentiometer is provided on one analog channel. A coin cell battery backed DS (RTC) is present on one of the I2C channel. An optional SPI external EEPROM (not provided with the board) can be mounted by the user for SPI memory. A ULN based stepper motor interface is present.   The Board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. FEATURES AND USAGE The maximum length and width of the Board is approx 7 inch by 5.5 inches. Four PCB studs allow the board to be attached to a surface or act like a support stand. All the ports of the microcontroller are available as edge connectors on the right side of the board on a standard 100 mil spacing. The board can also take most of the 40 Pin DIP PIC18 series microcontrollers. An External programmer may be needed

Looking for Development board India? Buy Microcontroller Development Board at best price in India. Microcontroller, Development board, Microcontroller price, Microcontroller Development board, kit online India

Introduction AVR CRUX is a tiny microcontroller development board based on ATtiny85, similar to the Arduino line, only cheaper, compact, lower power consumption and a bit less powerful. The board supports use of specific Arduino IDE and conveniently uses Arduino syntax for programming. This is a great way to jump into electronics and also perfectly fits when an Arduino is too big. AVR CRUX board may be tiny, but don’t be fooled by its size. The board has digital IO pins for regular use, PWM outputs to control motors and actuators, Analog inputs to interface with your sensors and a USB port to program and interact with your computer. It even has a tiny button switch used as reset button or a custom button and a user controllable LED to play around and create your first “blinking LED” program. A powerful board intended for artists, designers, hobbyists and anyone interested

    Other Items Feedbacks About Us Contact Us Add To Favorites   Set of 5 Pcs AVR28 Base Board  Kit.  For Electronic project.   CNB009 - Development Board For ATmega8,168,328,5 Pc Kit Electronics DIY Projects Atmel AVR - 28 Pin Base Boar d  -  1 Pcs (For ATmega8 ,ATmega 168,ATmega 328 Microcontroller)  **FREE**    10 Wire FRC Cable -  3 Pcs **FREE**    12V 1Amp SMPS -  1 Pc ** Does not Include Any Microcontroller ** ****FREE**** 3 Pcs of 10 Wire FRC (Flat Ribbon Cable) Cable - 15 cm.   ,with female connectors on both ends. Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: 0755-2420735, +91-9039873050 (10:30AM-6:30PM, Monday-Saturday) email: chipsnboards@gmail.com .in Toll free Helpline: 1800 209 3229 FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

Buy Espressif ESP Wrover kit & development board online at affordable price from Campus Component a leading electronic component provider in India. The ESP-WROVER-KIT-VB is a variant of ESP-WROVER-KIT that comes with an ESP32-WROVER-B module by default. This board features support for an LCD and Micro SD card. The I/O pins have been broken out from the ESP32-WROVER-B for easy extension. The board carries an advanced multi-protocol USB bridge (the FTDI FT2232HL), enabling developers to use JTAG directly to debug the ESP32 module through the USB interface. The development board makes secondary development easy and cost-effective. Module is FCC/ CE/ KCC/ IC/ TELEC/ SRRC/NCC certified. To know more about this product call on +919767444555 or visit website https://www.campuscomponent.com/products/espressif-esp-wrover-kit-vb-2-4-ghz-wifi-and-bt-ble-development-board/2208614000001841096

  The ARM7 Development Board comes with NXP’s LPC2148 microcontroller. The microcontroller can be programmed through the serial port using the on-chip serial bootloader. The board features various interfaces available on-board like LEDs, Push Buttons, Analog Input, Dual-RS232 port, EEPROM, Power Amplifier, USB connector, Buzzer, Character LCD and dedicated connectors to plug-in a Temperature Sensor, Distance measurement sensor, Accelerometer, micro SD Card and an XBEE wireless device. A JTAG connector is also provided to enable programming and debugging of the microcontroller. The board can be powered using an external power source like an adapter or can be powered using the USB port on the computer. The ARM7 Development board has been designed for optimal use of the peripherals on-chip and interfaces on-board to create a variety of applications. Features An on-board NXP’s LPC2148 microcontroller with ARM7 architecture. A power jack for an external power supply from 8 to 16V AC/DC. Alternatively the board can be powered through the on-board USB connector. A 16x2 Character LCD interface operating

Our top seller is back with a revision, the Ultra Development board has got a revision with enhanced features. A onboard USB to serial converter to connect directly to your laptop/computer, we have done away with the RS232. Also the board is more spacious with clear division among various peripherals.  We have designed this kit, so that a beginner can gradually build up from basics like LED blinking up to standard peripherals and communication protocols without having to change boards. We are shipping a USB AT89S series programmer with this board, for easy programming. T he entire kit is very affordable and we have solid 22 video tutorials to help you get started from architecture to interfacing all the on-board peripherals. Kit Contents: Development Board with following Modules, ICs and Interfaces USB Communication with CP Eight 5mm LEDs Eight Switches

Arduino uno r3 development board with ATmega328p CH340G Arduino clone based on current open source hardware Arduino uno Atmega 328p smd ideal for prototyping Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Summary arduino uno: ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB of which 0.5 KB used by bootloader SRAM 2 KB EEPROM 1 KB Clock Speed 16 MHz         Features of arduino uno: ·         Replaced the expensive 16u2 with CH340G chip to avoid the driver compatibility problem which was found on some win7/win8 OSes. ·         Increased the extra pin holes to facilitate the use of DuPont line cables, with some extra useful pins. ·         Extra 3x4 pin holes, next to ICSP connector, which includes Tx, Rx, 5v, 3.3v, ground, SDA and SCL.    ·         All the rest features are kept the same as the official version   Driver installation and usage procedure: · Install   CH340G driver  . ·     Install   Arduino IDE   ß   (click here) ·     Connect the board to computer. ·     Launch Arduino IDE, select board as “arduino uno” ·     Select the com port OS created for the card(control panel   à   device manager) ·     Open basics   à   blink sketch and upload. ·     If you find any difficulty you can contact us, contact details are given below.   Factory Testing Procedure for arduino uno Atmega328p: We will make sure that we have tested the product with following procedure before shipment ·   We have uploaded blink program with 2 second blinking rate of LED ‘L’ instead of 1second default rate. ·   You can check it at the time of receipt of the product. Just connect it to the USB port of any device and the ‘L’ LED will blink at the rate of 2 second.   Package Include arduino uno: ·   1 x   arduino uno development board ·   1 x   USB cable ·   A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Our top seller is back with a revision, the 8051 Ultra Development board has got a revision with enhanced features. A onboard USB to serial converter to connect directly to your laptop/computer, we have done away with the RS232. Also the board is more spacious with clear division among various peripherals.  We have designed this 8051 kit, so that a beginner can gradually build up from basics like LED blinking up to standard peripherals and communication protocols without having to change boards. We are shipping a USB AT89S series programmer with this board, for easy programming. T he entire kit is very affordable and we have solid 22 video tutorials to help you get started from architecture to interfacing all the on-board peripherals. Kit Contents: 1. 8051 Development Board with following Modules, ICs and Interfaces USB Communication with CP2102 Eight 5mm LEDs Eight Switches

ATTiny85 Digispark Mini USB Development Board Module Tiny85 for Arduino ATTiny85 Digispark Mini USB Development Board Module Tiny85 for Arduino This is a tiny, arduino compatible board! It has its own USB bootloader and built

UNO R3 Development Board ATmega328P ATmega16U2 with USB cable 100% compatible UNO R3 Development Board ATmega328P ATmega16U2 with USB cable 100% compatible 100% compatible Arduino UNO Board The new Uno is the latest version after the Duemilanove, with an improved USB interface chip. Like the Duemilanove, it not only has an expanded shield header with a 3.3V reference and a RESET pin (which solves the problem of how to get to the RESET pin