Dc boost

DC to DC Boost Power Converter Module XL Original, Best Quality @ Lowest Price Features Wide 5V to 32V Input Voltage Range Wide Output Voltage 5V to 35V Fixed 400KHz Switching Frequency Maximum 4A Switching Current Excellent line and load regulation High efficiency up to 94% Built

150W DC-DC Boost Converter V to V 6A Step Up Voltage Charger Power Product information Product Description     Featrure:     Module Properties: non-isolated step-up module (BOOST)     (length * width * high) (mm)     Input voltage:V     Output voltage: V (adjustable)     Output Current: 6A (MAX)     Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A)     Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)     Easy to drive 65W 90W dual-core notebook.     Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°c     Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)     Output Ripple: 2% (MAX) 20M-bandwidth     Operating Temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation)     Full load temperature rise: 45°c     No-load current: 25mA typical     Voltage regulation: ± 0.5%     Dynamic response speed: uS     Short circuit protection: None (Please Install fuses and protection circuits at Input port.)     Input Reverse Polarity Protection: None (Please Series diode at the input port.)   Some Applications:     1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be V(adjustable freely), However, the output voltage can not be less than the input voltage.     2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.  

XL power module + LED Voltmeter DC-DC Boost module with adjustable voltage meter display Description: Input voltage:V Output voltage:5-52V Maximum input current:4A Transfer efficiency:94% Output ripple:50mV Operating temperature:-℃ Switching frequency:400KHz Output ripple:50mV Load regulation:±0.5% Voltage regulation:±0.5% operating temperature:-℃ Size: Functions: Short press: input/output display options Moderate press: Enter the fine-tuning state.Increase or decrease the offset (the default is 0) when the voltage display inaccurate use.Short according to the regulation, long press or long according to restore Long press: the state of low power consumption, the digital tube and the lights are out, the normal work of the module. Click the button again to restore. Normal display Clockwise to adjust output voltage: Clockwise—– increasing voltage Counterclockwise—-reduce the voltage Reverse protection diodes prevent reverse connection High-frequency bypass capacitor electric spark Note: The output voltage must be higher than the input voltage. Related questions: Q. Why the voltmeter reading error sometimes feel? A. This is because the input voltage is corrugated. Q. Voltmeter voltage are shaking is why? A. The voltmeter is a high precision voltage meter. After many tests, the accuracy is 1%. If there is a rock, that the measured voltage is not stable. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

DC DC Converter Step Up Boost Module 3V To 5V 1A (mA) USB Charger Module Can charge USB devices rapidly using High Power switching upto mA @ 5V output Features： Module Properties: non-isolated step-up module (BOOST) input voltage: V Output voltage: 5V Output Current: the maximum mA Efficiency: Up to 92% (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating Temperature: Industrial (-40°c to +85°c) Voltage regulation: ± 2.5% Size:mm(L*W*H) Specification: Module uses switching chopper booster chip, high efficiency (maximum 92%), and at the same time heat dissipation is small, and chip has its own over-current protection function. Under-voltage protection function, if less than 2.5 V,it drives itself into under-voltage protection condition (good battery protection, avoids excessive discharge and damage). 5W Output Power(MAX). This module USES a TDK laminated ceramic capacitor as the main filtering capacity, can make the output ripple low to 20 mv (5 v1a output cases) Standard USB interface, can be used for USB charging of mobile phones, MP3, MP4 and other equipment. Package Contents: 1 x DC boost USB module Shipping through DTDC/Trackon/OnDot/Madhur/Speedpost                                 For more information on our products and shipping please email us at     Please note that  All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items.  These are imported electronic items and can  easily  get damaged by mishandling or wrong connections.  Please Buy only if you can understand the product and its working well.  All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

DC to DC Buck Power Converter Module LM Original, Best Quality @ Lowest Price Features • Adjustable Output Voltage Range 1.23 V − 37 V  • Guaranteed 3.0 A Output Load Current  • Wide Input Voltage Range 3V to 40 V  • 150 kHz Fixed Frequency Internal Oscillator  • TTL Shutdown Capability  • Low Power Standby Mode, typ 80 A  • Thermal Shutdown and Current Limit Protection  • Internal Loop Compensation  • Moisture Sensitivity Level (MSL) Equals 1  • Pb−Free Packages are Available  Applications  • Simple High−Efficiency Step−Down (Buck) Regulator  • Efficient Pre−Regulator for Linear Regulators  • On−Card Switching Regulators  • Positive to Negative Converter (Buck−Boost)  • Negative Step−Up Converters  • Power Supply for Battery Chargers • Solar Projects • Robo Power Supply  :Package Includes: 1 X LM DC to DC Buck Converter Module For any  queries  please feel free to write us using  "Ask Seller a Question"  link  OR  Call us on  DC to DC Buck Converter Module LM Based, LM, DC to DC, Converter, Buck, Buck Converter, LM DC to DC Buck Converter Module,

DSNA is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XLE1 core chip performance than the first generation technology LM. XL boost module at a lower cost, superior performance, LM module is about to be eliminated. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM frequency only 50KHz) Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current Technical Parameters: Module Properties:  Non-isolated boost (BOOST) Rectification:  Non-Synchronous Rectification Input Range:  3V ~ 32V Output Range:  5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current:  4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency:  Switching frequency:  400KHz Output Ripple:  50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation:  ± 0.5% Voltage Regulation:  ± 0.5% Operating Temperature:  - ℃ Dimensions:  43mm * 21mm * 14mm (L * W * H) *Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink. Package included: 1 x  DC-DC Adjustable Step-up Boost Power Converter Module XL SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

Package Contents 1 x DC 3V to 5V USB Output charger Step Up Power Module Mini DC-DC Boost Converter Item specifications Brand Name:DC Converter     Size:24x18mm     Output Current:Rated 1A-1.5A     Output Power:1 - 50W     Type:DC/DC Converters     Input Voltage:1-5V     Output Voltage:V Weight:0.03g     Efficiency::Up to 96%     Switching frequency::500KHz     Output ripple::30mV (MAX) 20M bandwidth     Voltage indication::LED lights with load     Operating Temperature::Industrial (-40°c to +85°c)     Output::USB Output     Product Description - Features:         Module Properties: non-isolated step-up module (BOOST)         input voltage: 1-5V     Output voltage: V         Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)         Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)         Switching frequency: 500KHz         Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)         Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)         Operating Temperature: Industrial (-40°c to +85°c)         Full load temperature rise: 30°c         Quiescent Current: 130uA         Load regulation: ± 1%         Voltage regulation: ± 0.5%         Dynamic response speed: uS         Short circuit protection: None (Please use the lithium battery with protection.)         Input Reverse Polarity Protection: None         Connection: Welding         Input: IN + Postive, IN-Negative         Output: USB Output     Applications: Do It Yourself (DIY) make a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.    In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.    Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Description It is 2.3 inch 8x8 RGB(Full-color) Dot Matrix LED Display 1. Common anode row LED matrix, and common cathode row one is available 2. 32 DIPs LED matrix display module It has reflector black,white or grey face is available; Technical parameters: 1. LED matrix module size: 60.6x60.6mm 2. LED round dot diameter: 5mm 3. Dot matrix module pitch(dot-to-dot distance): 7.62mm   Package Includes: 1 Piece new  DC-DC V To V 150W Power Supply Boost Adjust Module It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description It is 2.3 inch 8x8 RGB(Full-color) Dot Matrix LED Display 1. Common anode row LED matrix, and common cathode row one is available 2. 32 DIPs LED matrix display module It has reflector black,white or grey face is available; Technical parameters: 1. LED matrix module size: 60.6x60.6mm 2. LED round dot diameter: 5mm 3. Dot matrix module pitch(dot-to-dot distance): 7.62mm   Package Includes: 1 Piece new  DC-DC 10-32V To 12-35V 150W Power Supply Boost Adjust Module It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Product Description: This module can make your output voltage constant if you are within Technical limits of input / output. Say for Example if you have a Small Solar Panel 50 Watts (Maximum ~4A). If there's little cloudy and you are getting 10V and 2A. Now

Dc to DC step up USB Boost module. Convert 2.9V TO 5.1V OUTPUT Current 1A via USB On board led (blue & red) Micro USB for direct battery charging For better results use high current rating battery buy only if you are familiar /having knowledge on circuits Consignment will dispatch through India postal service speed post fastest and safest way of handling

DC 0.9-5V to 5V USB Output charger Step Up Power Module Mini DC-DC Boost Converter Image shown is for indication/idea purpose. Actual item may vary

DSNA is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XLE1 core chip performance than the first generation technology LM. XL boost module at a lower cost, superior performance, LM module is about to be eliminated. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM frequency only 50KHz) Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current Technical Parameters: Module Properties:  Non-isolated boost (BOOST) Rectification:  Non-Synchronous Rectification Input Range:  3V ~ 32V Output Range:  5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current:  4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency:  Switching frequency:  400KHz Output Ripple:  50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation:  ± 0.5% Voltage Regulation:  ± 0.5% Operating Temperature:  - ℃ Dimensions:  43mm * 21mm * 14mm (L * W * H) *Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink. Package included: 1 x  DC-DC Adjustable Step-up Boost Power Converter Module XL

XL DC-DC step up module, better than LM, with adjustable booster power supply module, Output Max Current 4A   This module is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency. Description: XTW is a 4 a switch current high-performance step-up (BOOST) module. The XLE1 module USES the second generation of high frequency switch technology as the core chip, LM performance far beyond the first generation of technology.  XL booster module cost is lower, performance is more outstanding, LM module will be eliminated. Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range; Low ultra wide output voltage 5 v ~ 35 v; Built-in 4 a efficient MOSFET switch tube, make efficiency up to 94%; (LM current only 3 a)/ High switching frequency, 400 KHZ, can use the small capacity of the filter capacitor can achieve very good effect, ripple smaller and smaller Operating temperature:-℃   Note: The output voltage must be higher than the input voltage. IN-IN + input Positive Input Negative! Positive output OUT + OUT-output negative Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: input current Vout: Output Voltage Iout: output current Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

0.9v - 5v PFM Step Up Boost Module for Mobile Charger / DIY Power Banks| 96% Ef. 0.9v - 5v PFM Step Up Boost Module for Mobile Charger / DIY Power Banks| 96% Ef. Description • input voltage: 0.9-5V DC  • Output voltage: 5V DC  • Output Current: mA  • High conversion efficiency, maximum to 96%  • Onboard power led indicator  • With USB connector, this module could be used to power Cellphone, camera and other Digital Products.  • Small dimension  • PCB Size:34(mm) x 16.2(mm)  Applications:  1 DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.  2 In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.  Do Provide a Feedback for us, As it would help us to give you our best Support and Service. Payment:- We Only Aceept PaisaPay Payments.  You Can Pay Through Credit/Debit Cards, Net Banking. Shipping:- We Ship through PowerShip So if your Region is not Covered under Powership, Sorry then we Can't Help You. Contact Before Giving any Negative / Neutral Feedback. Giving any Negative/ Neutral Feedback will not Solve your Problem. Therefore Try to Contact before, on any of the Below Mentioned Contacts / Messages. For any Queries Contact:-      Or                                                                                       Phone:-               Support Email:-     

Module properties: unfenced step-up (BOOST) The input voltage: 3-32 v Continuous adjustable output voltage: 5v-35 v  Input current: 4 a (Max), no-load 18 ma Module size: 44.7 (mm) x21.7 (mm) Input mode: IN + input level is, the IN - negative input Output mode: OUT + output level is, the OUT - output is negative Conversion efficiency: Output ripple: 50 mv (the bigger the higher the voltage, current and ripple) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

Description Package Includes: 1 Piece new  XL Adjustable DC-DC Step-up Boost Power Converter Module Betr thn LMA It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  XL6009 Adjustable DC-DC Step-up Boost Power Converter Module Betr thn LM2577 4A It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9560773418 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description 100% brand new and high quality Input: DC 3V to 40V (input voltage must be higher than the output voltage to 1.5v above can not boost) Output: DC 1.25V to 35V voltage continuously adjustable, high-efficiency maximum output current of 3A. Adjustment using the adjustable resistance The characteristics of the low price, small size, and relatively simple function Normal Operation Tempretaure is 25 degree. IN + input positive IN-enter negative! OUT + output the positive OUT-output negative Note that the input and output can not be reversed. Reverse may burn out Specification Color: As shown

Module properties: unfenced step-up (BOOST) The input voltage: 3-32 v Continuous adjustable output voltage: 5v-35 v  Input current: 4 a (Max), no-load 18 ma Module size: 44.7 (mm) x21.7 (mm) Input mode: IN + input level is, the IN - negative input Output mode: OUT + output level is, the OUT - output is negative Conversion efficiency: Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)

ASUS Strix GeForce GTX 970 with factory-overclocked core delivers cool and silent gaming experiences 1253 MHz Boost clock for better performance and outstanding gaming experience. DirectCU II with 0dB fan technology lets you enjoy light games

Order more than one piece to save shipping cost. You can contact us at +91 for any question or concern. Kit Details Package Include 9 Piece

5 Mic & 2 Aux Inputs. Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme. Line Input for connecting the output from any external mixer or permitting SSA-160EM to be used as a Booster Power Amplifier. Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails. Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units. Specifications: Power Output  220W Max., 160W RMS at 10% THD  140W RMS at 5% THD, 120W RMS at 2% THD  Output Regulation  2 dB, no load to full load at 1kHz  Input Channels  5 × Mic 0.65mV/4.7kOhms, 2 × Aux 100mV/470kOhms  .  1 × Line 1V/50kOhms  Frequency Response  Hz ±3dB  Signal to Noise Ratio  60dB  Tone Controls  Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz  Outputs  Preamp 200mV/600 Ohms, Line 1V/1kOhms  Speaker Outputs  4 Ohms, 8 Ohms, 70V & 100V  Power Supply  AC: V Hz DC: 24V (2×12V Car Battery)  Power Consumption  AC: 320VA DC: 4A  Dimensions  W420 × H155 × D320 mm  Weight  13.6kg  

FEATURES 7 Mic & 2 Aux Inputs. Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme. Line Input for connecting the output from any external mixer or permitting SSA-EM to be used as a Booster Power Amplifier. Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails. Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units. SPECIFICATIONS   Power Output 750W Max., 500W RMS at 10% THD  . 450W RMS at 5% THD, 415W RMS at 2% THD  Output Regulation  2 dB, no load to full load at 1kHz  Input Channels 7 × Mic 0.8mV/4.7k, 2 × Aux 100mV/470 k  . 1 × Line 1V/50k  Frequency Response Hz ±3dB  Signal to Noise Ratio 60dB  Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz  Outputs Preamp 200mV/600, Line 1V/1k  Speaker Outputs V & 100V  Power Supply AC: V Hz DC: 36V (3×12V Car Battery)  Power Consumption AC: VA DC: 8A  Dimensions W510 × H172 × D385 mm  Weight 26.7kg  

6 Mic & 2 Aux Inputs. Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme. Line Input for connecting the output from any external mixer or permitting SSA-250 to be used as a Booster Power Amplifier. Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails. Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.  Power Output  300W Max., 250W RMS at 10% THD  .  220W RMS at 5% THD, 200W RMS at 2% THD  Output Regulation   2 dB, no load to full load at 1kHz  Input Channels  6 × Mic 0.65mV/4.7k, 2 × Aux 100mV/470 k  .  1 × Line 1V/50k  Frequency Response  Hz ±3dB  Signal to Noise Ratio  60dB  Tone Controls  Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz  Outputs  Preamp 200mV/600, Line 1V/1k  Speaker Outputs  V & 100V  Power Supply  AC: V Hz DC: 24V (2×12V Car Battery)  Power Consumption  AC: 500VA DC: 6A  Dimensions  W450 × H160 × D340 mm  Weight  16.0kg

Best mobile Signal Booster is a single band booster and can boost signal strength for all network operators.The signal amplifier device works on DC power, the adaptors perform a crucial role of accepting AC power from the power source within the premise and converting it to DC power.A wide range of products and services know more about it in detail.https://www.cellboost.in/product/adapter/

SPECIFICATIONS   Type:     bass-reflex active powered subwoofer Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround Frequency Response: 20Hz - 200Hz (-3dB points) Crossover: HP/LP linked filter sweepable from Hz; 24dB/octave 4th-order alignment Input Sensitivity: 85mV pink noise input produces 100dBA output SPL at one meter with volume control at maximum Amplifier: 240 watts average power into 8 Ohms, discrete transistor design Signal-to-Noise Ratio: 86dB (A-weighted) THD at Rated Power, Mono Mode: W) Inputs: two XLR balanced inputs; two TRS balanced/unbalanced inputs Outputs: two XLR balanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites Controls: volume/gain control, 10dB bass boost switch, sleep mode switch, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack Input Impedance: 20k ohms balanced, 10k ohms unbalanced Maximum Input Level: +20dBU Auto Turn Off Time: 15 minutes Auto Turn On Input Sensitivity: 7.3 mV Protection: over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection Indicator: power on (blue) or standby/bypass (red) Power Requirements: dual-voltage (selectable by rear-panel switch) for either V/~Hz or V/~Hz; powered via detachable grounded IEC cable Cabinet: vinyl-laminated MDF Dimensions: 15 in. (h) x 15 in. (w) x 15 in. (d); 38.1 cm (h) x 38.1 cm (w) x 38.1 cm (d) Shipping Weight: 54.6 lbs.; kg   Note: It may take up to one month for delivery, since imported item.

HP Z8 Workstation is the best with the flagship of Z to do all your power- intensive workloads. Get the ultimate productivity boost when working with massive and complex data sets with Intel® Optane™ DC Persistent Memory. GlobalNettech provides this HP Z8 Workstation Rental in Gurgaon. Rental Price:INR.10000/- Contact us: GlobalNettech Office no: 080-25447708 Email address: enquiry@globalnettech.com, Product Page: https://globalnettech.com/

Looking for the best Servo Controlled Voltage Stabilizer Manufacturers? Get in touch with MPIL, Identified as the leading manufacturer & supplier of quality Servo Controlled Voltage Stabilizer Transformers. In Electrical Industry, MPIL is Muskaan Power Infrastructure Ltd. which is CPRI/ERDA/BIS Approved an ISO 9001:2008 Certified Company. We deal in furnace transformers, isolation transformers, variable transformers, distribution transformers, power transformers, servo voltage stabilizers, voltage stabilizers, industrial stabilizers, rectifiers, dc rectifiers, regulators, stabilizers, voltage regulators, servo controlled voltage stabilizer electric rectifiers, power-saving devices, KVAR unit, PowerBoss generator, etc. Servo Controlled Voltage Stabilizer means A Servo Stabilizer is a Servo motor controlled stabilization system that performs optimum voltage supply using a Buck/Boost transformer booster that captures voltage fluctuations from input and regulates current to the correct output. We deal in high-standard Stabilizers that have excellent features such as high durability and high efficiency because of their quality engineer team whose latest manufacturing technologies & quality raw material. Our Stabilizer gives great control against voltage alteration. During the process of manufacturing, our stabilizers are tested under the supervision of quality auditors to ensure the quality of products. Reach Us: Sua Road, Industrial Area – C, Dhandari Kalan, 141014 Ludhiana, Punjab, India Contact person: Ravi Mahajan/Neeraj Mahajan Mail us your Requirements: info@muskaanpower.com » Get more details here: https://www.mpilindia.com/servo-controlled-voltage-stabilizer-transformer