Dc adjustable boost

DSNA is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XLE1 core chip performance than the first generation technology LM. XL boost module at a lower cost, superior performance, LM module is about to be eliminated. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM frequency only 50KHz) Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current Technical Parameters: Module Properties:  Non-isolated boost (BOOST) Rectification:  Non-Synchronous Rectification Input Range:  3V ~ 32V Output Range:  5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current:  4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency:  Switching frequency:  400KHz Output Ripple:  50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation:  ± 0.5% Voltage Regulation:  ± 0.5% Operating Temperature:  - ℃ Dimensions:  43mm * 21mm * 14mm (L * W * H) *Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink. Package included: 1 x  DC-DC Adjustable Step-up Boost Power Converter Module XL SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

LM Voltage Display Module DC-DC Buck Converter Step-Down Power Module   This is an LM DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater than 10W), please add a heat sink on it. Features  Adjustable Output Version Adjustable Version Output Voltage Range, 1.2V to 37V ±4% Max Over Line and Load Conditions Available

Product Description: This module can make your output voltage constant if you are within Technical limits of input / output. Say for Example if you have a Small Solar Panel 50 Watts (Maximum ~4A). If there's little cloudy and you are getting 10V and 2A. Now

Description. "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">LM2596 DC Adjustable Step-Down Power Module + LED Voltmeter + USB +2.54mm Needle Technical parameters: 1 Piece new   "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">LM2596 DC Adjustable Step-Down Power Module + LED Voltmeter + USB +2.54mm Needle Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We maintain high quality and shipping standards  We strive for 100% positive feedback and work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

DSNA is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XLE1 core chip performance than the first generation technology LM. XL boost module at a lower cost, superior performance, LM module is about to be eliminated. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM frequency only 50KHz) Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current Technical Parameters: Module Properties:  Non-isolated boost (BOOST) Rectification:  Non-Synchronous Rectification Input Range:  3V ~ 32V Output Range:  5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current:  4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency:  Switching frequency:  400KHz Output Ripple:  50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation:  ± 0.5% Voltage Regulation:  ± 0.5% Operating Temperature:  - ℃ Dimensions:  43mm * 21mm * 14mm (L * W * H) *Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink. Package included: 1 x  DC-DC Adjustable Step-up Boost Power Converter Module XL

Module properties: unfenced step-up (BOOST) The input voltage: 3-32 v Continuous adjustable output voltage: 5v-35 v  Input current: 4 a (Max), no-load 18 ma Module size: 44.7 (mm) x21.7 (mm) Input mode: IN + input level is, the IN - negative input Output mode: OUT + output level is, the OUT - output is negative Conversion efficiency: Output ripple: 50 mv (the bigger the higher the voltage, current and ripple) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

DC-DC adjustable step-down power Supply module, 5A Large current Areas of application: DIY mobile power supply, car power, communications equipment power supply, etc. input voltage: 5V-32V output voltage: 0.8V-24V output current: peak 5A (more than 3.5A work need to strengthen The cooling) Conversion efficiency:90% size:mm(L*W*H) The step-down module can easily reach 4 a, 50 w, add heat sink can reach 75 w, under the condition of extremely high price!!!!! Modules window: 5 A high-power high efficiency low ripple Module performance and features: Module properties the isolation step-down module (BUCK) 4-38 v input voltage: (please try not to exceed 38 v input) Output voltage: v continuous adjustable Output current: 0-5 A, it is recommended to use

DC to DC Boost Power Converter Module XL Original, Best Quality @ Lowest Price Features Wide 5V to 32V Input Voltage Range Wide Output Voltage 5V to 35V Fixed 400KHz Switching Frequency Maximum 4A Switching Current Excellent line and load regulation High efficiency up to 94% Built

DC to DC Buck Power Converter Module LM Original, Best Quality @ Lowest Price Features • Adjustable Output Voltage Range 1.23 V − 37 V  • Guaranteed 3.0 A Output Load Current  • Wide Input Voltage Range 3V to 40 V  • 150 kHz Fixed Frequency Internal Oscillator  • TTL Shutdown Capability  • Low Power Standby Mode, typ 80 A  • Thermal Shutdown and Current Limit Protection  • Internal Loop Compensation  • Moisture Sensitivity Level (MSL) Equals 1  • Pb−Free Packages are Available  Applications  • Simple High−Efficiency Step−Down (Buck) Regulator  • Efficient Pre−Regulator for Linear Regulators  • On−Card Switching Regulators  • Positive to Negative Converter (Buck−Boost)  • Negative Step−Up Converters  • Power Supply for Battery Chargers • Solar Projects • Robo Power Supply  :Package Includes: 1 X LM DC to DC Buck Converter Module For any  queries  please feel free to write us using  "Ask Seller a Question"  link  OR  Call us on  DC to DC Buck Converter Module LM Based, LM, DC to DC, Converter, Buck, Buck Converter, LM DC to DC Buck Converter Module,

DC DC Converter Step Up Boost Module 3V To 5V 1A (mA) USB Charger Module Can charge USB devices rapidly using High Power switching upto mA @ 5V output Features： Module Properties: non-isolated step-up module (BOOST) input voltage: V Output voltage: 5V Output Current: the maximum mA Efficiency: Up to 92% (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating Temperature: Industrial (-40°c to +85°c) Voltage regulation: ± 2.5% Size:mm(L*W*H) Specification: Module uses switching chopper booster chip, high efficiency (maximum 92%), and at the same time heat dissipation is small, and chip has its own over-current protection function. Under-voltage protection function, if less than 2.5 V,it drives itself into under-voltage protection condition (good battery protection, avoids excessive discharge and damage). 5W Output Power(MAX). This module USES a TDK laminated ceramic capacitor as the main filtering capacity, can make the output ripple low to 20 mv (5 v1a output cases) Standard USB interface, can be used for USB charging of mobile phones, MP3, MP4 and other equipment. Package Contents: 1 x DC boost USB module Shipping through DTDC/Trackon/OnDot/Madhur/Speedpost                                 For more information on our products and shipping please email us at     Please note that  All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items.  These are imported electronic items and can  easily  get damaged by mishandling or wrong connections.  Please Buy only if you can understand the product and its working well.  All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

DC 12V-40V Large Torque PWM Motor Speed Controller Reversible Control Switch Specifications High Power, High efficiency, Large torque The motor speed controller incorporates a high power MOSFET with a heat sink and can easily provide a continuous current of 3A to your DC motor or other DC load With switch function and Reversible Control function Onboard 10A fuse, with reverse power, over voltage, high current protection function Mode:CCM2NJ Input supply voltage:VDC(max) Maximum output power:120W rated current: 3A Maximum continuous output protecting current:5A PWM frequency: 15kHz Duty Cycle adjustable:% Indicator: Power-On LED Size: 70x39x31mm/2.75"x1.53"x1.22"(approx) Color: as the picture show Package includes 1 x PWM DC Reversible Motor Speed Controller Images Click here to check out our other products

This is high performance DC to DC Step Down Adjustable Power Supply Module.   Based on Newly developed LMS Wide range Switching Regulator. Size: Approx. 43 x 20 x 14 mm Color: As the picture show Full load Temperature rise: 40 Load Regulation: ± 0.5% Voltage Regulation: ± 0.5% Dynamic Response speed: uS Input voltage:V Output voltage:V(Adjustable) Output current: Rated current is 2A,maximum 3A(Additional heat sink is required) Conversion Efficiency: Up to 92% (output voltage higher, the higher the efficiency) Switching Frequency: 150KHz Rectifier: Non-Synchronous Rectification Module Properties: Non-isolated step-down module (buck) Short Circuit Protection: Current limiting, since the recovery Operating Temperature: Industrial grade (-40 to +85) (output power 10W or less) Package included:   1 x LMS DC-DC adjustable power step-down module   ·          ==Fast Shipping== ·          Once you place the order, your shipment will be shipped out via DTDC Couriers within 24 business hours. ·          WE SHIPS ITEM VIA DTDC COURIERS IF YOUR AREA IS NOT SERVICEABLE BY DTDC COURIERS THEN PLEASE DO NOT ORDER NO NEGATIVE OR NUTERAL FEED BACK WILL ACCEPTED IN THIS REGARD ·            ·          OR IF YOU WANT TO SEND IT BY INDIA POST (IT WILL TAKE LITTLE LONGER TO DELIVER) PLEASE MAIL US AFTER YOUR ORDER ·            ==Contact== ·          Got any questions? Feel free to contact us via 'Ask a question' option on and we will reply with detailed answer to your query pretty fast. We care about our valued customers, and will always try to help you.  ·          ==One Request== ·          Please leave positive feedback once you receive the item

Features: This is high performance DC to DC Step Down Adjustable Power Supply Module Based on well known LM Switching Regulator. Size: Approx. 4.7 x 2.6 x 1.3cm Color: As the picture show Full load Temperature rise: 40 Load Regulation: ± 0.5% Voltage Regulation: ± 0.5% Dynamic Response speed: uS Input voltage:V Output voltage:V(Adjustable) Output current: Rated current is 2A,maximum 3A(Additional heat sink is required) Conversion Efficiency: Up to 92% (output voltage higher, the higher the efficiency) Switching Frequency: 150KHz Rectifier: Non-Synchronous Rectification Module Properties: Non-isolated step-down module (buck) Short Circuit Protection: Current limiting, since the recovery Operating Temperature: Industrial grade (-40 to +85) (output power 10W or less) Package included: 1 x  LM DC-DC adjustable power step-down module

Package Contents 1 x DC 3V to 5V USB Output charger Step Up Power Module Mini DC-DC Boost Converter Item specifications Brand Name:DC Converter     Size:24x18mm     Output Current:Rated 1A-1.5A     Output Power:1 - 50W     Type:DC/DC Converters     Input Voltage:1-5V     Output Voltage:V Weight:0.03g     Efficiency::Up to 96%     Switching frequency::500KHz     Output ripple::30mV (MAX) 20M bandwidth     Voltage indication::LED lights with load     Operating Temperature::Industrial (-40°c to +85°c)     Output::USB Output     Product Description - Features:         Module Properties: non-isolated step-up module (BOOST)         input voltage: 1-5V     Output voltage: V         Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)         Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)         Switching frequency: 500KHz         Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)         Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)         Operating Temperature: Industrial (-40°c to +85°c)         Full load temperature rise: 30°c         Quiescent Current: 130uA         Load regulation: ± 1%         Voltage regulation: ± 0.5%         Dynamic response speed: uS         Short circuit protection: None (Please use the lithium battery with protection.)         Input Reverse Polarity Protection: None         Connection: Welding         Input: IN + Postive, IN-Negative         Output: USB Output     Applications: Do It Yourself (DIY) make a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.    In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.    Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

With power indicator ● With the voltmeter shows that the use of advanced microprocessors, voltmeter error ± 0.05V, range 0 ~ 40V. (Note: To ensure accuracy voltmeter, please ensure that the input voltage is 4V above) ● Tap the right button to switch the input or output voltage measurements and has a light display which is being measured voltages, and save the settings, even then boot off ● voltmeter can be turned off when not needed can easily touch the left button ● With terminals, no soldering iron can also be easy to use, and retention wire connection points Input Voltage V (input voltage must be higher than the output voltage of 1.5v or more.) ● Adjustable output voltage range of 1.25V ~ 37V continuously adjustable (1.5V input voltage must be higher than the output voltage) ● Maximum output current up to 3A, normal and stable operating current of 2A ● using the internal oscillator frequency 150KHz, which belongs to the second generation of switching voltage regulator, power consumption, high efficiency. ● With overheat protection and short circuit protection