Digital amplifier

5.1 Channel Digital Optical Amplifier Audio Switcher 4x2 4 In puts to 2 Out pu ts Po wered Matrix Sw i t cher/Amplifier with Manual Control and Remo te Control Product Description Specifications 5.1 channel digital amplifier audio switcher 4x2 1.Support signal retiming 2.Used optical fiber cable loss less the 0.2Db/m   FEATURES   1.Four ways of optical fiber signal input split or switch to two sets of SPDIF signal receiving device. 2.Audio format support: DTS-HD/Dolby-trueHD/LPCM2.0/DTS/Dolby-AC3/DSD 3.Support signal retiming 4.Used optical fiber cable loss less the 0.2Db/m Output distance is up to 40m. 5.The input control can be through Remote and also directly by pressing the button. 6.Supports last time working state memory when power off. 7.Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine if the light for standby indication flashed it shows that the output voltage from the power adaptor is too high and the adaptor needs to be changed. 8.LED status indication it can tell us the working state of the device very easily. 9.No loss of quality 10.Installs

DIGITAL TO ANALOG AUDIO CONVERTER       Introduction: This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink Digital Audio Signals to Analog L/R Audio Signals and connects to an external device, such as an amplifier via Standard RCA jacks. Features: Supports Uncompressed 2-channel LPCM Digital Audio Signal Output Supports Sampling Rate at , and 96 KHz 24-bit S/PDIF incoming bit stream on Left and Right Channels Provides electromagnetic-noise-free transmission Compact Size, Easy to install and Simple to Operate Specifications: Input Audio: Coaxial or Toslink digital audio signals to analog L/R audio Output Audio: L/R audio Input audio connector: 1 x Toslink, 1 x RCA (Coaxial) Output audio connector: 2 x RCA(R/L) Power input: AC V Hz Output: DC 5V 1A Product size: 51x40x26mm Package Contents: 1 x Digital to Analog Audio Converter 1 x 5V DC Power Supply 1 x User Manual We have always tried to provide the best available and reliable product to each customer, however sometimes it may happen that the product does not meet your expectation

ntroduction The Digital to Analog Audio Decoder is used 24-bit audio DSP, 96KHz digital receivers, and 192KHz/24bit ADC, DAC. Support Dolby Digital AC-3 Dolby Pro Logic, DTS, PCM and other digital audio format source decode, a variety of sound field and the replay results of two listening modes, 2.0ch analog audio output,  auto work with different amplifier and speakers to get different sound effects, easy to connect entertainment devices  which with optical, coaxial digital signal and analog output signals.    Features 1.      Convert DTS/AC3 source digital audio to analog 2.0ch stereo audio output. 2.      Multi-channel audio input (SPDIF,Coaxial) 3.      No need to install drivers, portable, flexible, plug and play.        Specifications 1.      Input ports:    1xToslink/SPDIF,1xCoaxial 2.      Output ports:   2xRCA(L/R), 1x3.5mmPhoneJack. 3.      Signal to Noise: 120db 4.      Degree of Separation: 85db 5.      Frequency Response: (20Hz ~ 20KHz) +/- 0.5db 6.      Dimensions(mm):   72(D)x55(W)x20(H) 7.      Weight (g):  40       Application Example The Digital to Analog Audio Decoder is used 24-bit audio DSP, 96KHz digital receivers, and 192KHz/24bit ADC, DAC. Support Dolby Digital AC-3 Dolby Pro Logic, DTS, PCM and other digital audio format source decode, a variety of sound field and the replay results of two listening modes, 2.0ch analog audio output,  auto work with different amplifier and speakers to get different sound effects, easy to connect entertainment devices  which with optical, coaxial digital signal and analog output signals.  Features 1. Convert DTS/AC3 source digital audio to analog 2.0ch stereo audio output. 2. Multi-channel audio input (SPDIF, Coaxial) 3. No need to install drivers, portable, flexible, plug and play. Specifications 1. Input ports:    1xToslink/SPDIF,1xCoaxial  2. Output ports:   2xRCA(L/R), 1x3.5mmPhoneJack. 3. Signal to Noise: 120db 4. Degree of Separation: 85db 5. Frequency Response: (20Hz ~ 20KHz) +/- 0.5db 6. Dimensions(mm): 72(D)x55(W)x20(H) 7. Weight (g):  40 Package: 1Pc Digital to Analog Audio Converter  1Pc Power Adapter 1Pc User Manual     Kindly mention your Complete Address with landmark and the Pin Code with Mobile and Landline Contact Numbers to help us to deliver the product on time. No address change request would be entertain once the order is placed.                                                                                    Note: Before making payment please check if your area is servicable by below mentioned logistics partners:  Delivery

Coaxial Toslink SPDIF Signal to Analog Audio Converter Digital Optical RCA DAC-A 100% Brand New & High Quality.   100% tested & works great with Apple TV.   This Digital to Analog Audio Converter is designed for either home or professional audio switching.   It converts Coaxial or Toslink digital audio signals to analog stereo L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks.   Supports sampling rates at 32kHz, 44.1kHz, 48kHz, 96kHz.   24-bit S/PDIF incoming bit stream on left and right channels   Provides electromagnetic-noise-free transmission   Compact size, Easy to install and simple to operate   Specification: Input Audio: Coaxial or Toslink digital audio Output Audio: Analog L/R stereo audio Input audio connector: Toslink, 1x RCA (Coaxial) Output audio connector: 2x RCA (R/L) Sampling rate: and 96 KHz Size: 51 x 40 x 26mm (L x W x H) Weight (Net): 65g   Free Toslink Optical Audio Cable   Power Adapter: Input AC: V Hz Output DC: 5V 1A   Package included  : Digital to Analog Audio Converter x 1 Power Adapter x 1 (Australia Standard) English User Manual x 1 Free Toslink Optical Audio Cable x 1 (1.5M)

Description: This Digital to Analog Audio Converter is designed for either home or professional audio switching.   It   converts Coaxial or Toslink digital audio signals to analog L/R audio   and available for connection to an external device such as an amplifier via standard RCA-style jacks.   This Converter is small

This Digital to Analog Audio Converter is designed for either home or professional audio switching.  It  converts Coaxial or Toslink digital audio signals to analog L/R audio  and available for connection to an external device such as an amplifier via standard RCA-style jacks.  Connect your New LCD or LED TV (Optical or Coaxial Out) with your old Home Theater System (R/L Audio IN) or your High Quality Headphones. This Converter is small

Digital to Analog Audio Converter (DAC) Overview This Digital to Analog Audio Converter is the perfect solution to connect a device that features a digital S/PDIF connection (Optical or Digital Coaxial) to an external Amplifier or Sound System via standard RCA analogue audio inputs. Alternatively, this converter can be connected to portable speakers or headphones via the 3.5mm connection. Simply connect an Optical Cable or a Digital Coaxial Cable to the input of this device, then connect either a Stereo RCA Cable or a 3.5mm Stereo Cable to the output, power on the unit and the audio will be seamlessly converted from digital to analogue. Converts Digital Audio LPCM Signal (Optical or Digital Coaxial) to Analogue Stereo Signal Outputs Both L/R RCA and 3.5mm Simultaneously Supports Audio Sampling Rates of 32kHz, 44.1kHz, 48kHz and 96kHz Also Supports 24-Bit Audio Can be Powered Either from the Supplied Power Adaptor  High Quality Audio Conversion Package Contents 1 x Digital to Analog Audio Converter Unit 1 x Power Supply 1 x User Manual (English)   We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please  contact  us to resolve any issue  Contact Us on  - +91    

DIGITAL TO ANALOG AUDIO CONVERTER   +   2RCA TO 2RCA CABLE 1.5METER         Introduction: This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink Digital Audio Signals to Analog L/R Audio Signals and connects to an external device, such as an amplifier via Standard RCA jacks. Features: Supports Uncompressed 2-channel LPCM Digital Audio Signal Output Supports Sampling Rate at , and 96 KHz 24-bit S/PDIF incoming bit stream on Left and Right Channels Provides electromagnetic-noise-free transmission Compact Size, Easy to install and Simple to Operate Specifications: Input Audio: Coaxial or Toslink digital audio signals to analog L/R audio Output Audio: L/R audio Input audio connector: 1 x Toslink, 1 x RCA (Coaxial) Output audio connector: 2 x RCA(R/L) Power input: AC V Hz Output: DC 5V 1A Product size: 51x40x26mm Package Contents: 1 x Digital to Analog Audio Converter 1 x 5V DC Power Supply 1 x User Manual   High Quality Long 2 RCA TO 2RCA CABLE Long double shielded stereo audio cable with 2 x gold plated metal cased RCA Phono plugs on each end. High quality cable, ideal for longer cable runs. SPECIFICATIONS: Cable: Double shielded     -: About Us:-   We are major Wholesale Dealers for Cables with 7 years of offline selling experience. We are here first time to take part

Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R RCA audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. Power Adapter. Digital to Analog Audio Converter Adapter. Full metal lightweight body, ensures heat dissipation performance inside. Supports sampling rate at 32kHZ, 44.1kHZ, 48kHZ, 96KHz and 192kHz, up to 24-bit resolution It converts Coaxial or Toslink digital audio signals to analouge L/R audio and available Provides electromagnetic noise free transmission Converts analog L/R signals to digital S/PDIF or TOSLink. Both TOSlink and Coax digital outputs may be used simultaneously

Product Description Miniature digital power amplifier board 2 * 3 w class D power amplifier board high 2.5 ~ 5 v can be USB power supply Shipped via powership. Fast ship - Bluedart/Fedex/DHL/Aramex Features: Miniature digital power amplifier board 2x3w class D power amplifier board, Can work on USB power supply. Good noise suppression Input audio should be via sheilded wire Dual channel stereo output 3 w + 3 w power Works with 5v power supply can directly drive 4 Ω/8 Ω small speakers big output power, sound quality is good. Unique without LC filter class D digital power board can use computer USB power supply directly Double panel wiring, super mini design, can easily fit

FEATURES DPA-770 is a PA amplifier with an inbuilt MP3 Digital Player, making it a versatile multi-application music center. The Digital Player accepts USB drives, and reproduces clear, high quality music. A remote control is provided for controlling the functions of the Digital Player from a distance. This, combined with 4 microphone inputs, 1 Aux input, and provision for multiple speaker connections makes this ideally suitable for a variety of music programmes and public address applications.4 Mic & 1 Aux Input.Built-in MP3 player with USB reader and remote control.Line Output for connecting to a Booster Amplifier.Active Bass & Treble controls.Instant transfer to DC Power (Car Battery) if AC power fails.5 LED array for output level monitoring. SPECIFICATIONS    Power Output 100W Max., 75W RMS at 10% THD, 70W RMS at 5% THD  Input Channels 4×Mic. 0.6mV/4.7k, 1×Aux 100mV/330k  Frequency Response Hz ±3dB  Signal to Noise Ratio 55dB  Tone Controls Bass: -10dB, +7dB at 100Hz Treble: -10dB, +7dB at 10kHz  Outputs Line: 1V/3.5k  Speaker Outputs V  Digital Player MP3 Player with USB reader  Power Supply AC: V Hz, DC: V Car Battery  Dimensions W385 × H130 × D310 mm  Weight 9.4kg  

DPA-370 is PA Amplifier with inbuilt MP3 Digital Player. Built with a aesthetically designed plastic front panel, it is an elegant, state-of-the-art product.The Digital Player plays back clear, high quality Mp3 music from an USB drive. A remote control is provided for easily operating the Digital Player from a distance. This, combined with 2 microphone inputs, 1 Aux input and provision for multiple speaker connection makes this product ideally suitable for a variety of music programmes and public address application.2 Mic & 1 Aux Input.Built-in MP3 player with USB reader and remote control.Line Output for connecting to a Booster Amplifier.Tone for cutting excessive high frequencies.Instant transfer to DC Power (Car Battery) ifAC power fails.Monitor LED for output monitoring SPECIFICATIONS    Power Output 35W Max., 28W RMS at 10% THD, 25W RMS at 5% THD  Input Channels 2 × Mic. 0.5mV/2.5k, 1 × Aux 50mV/330k  Frequency Response Hz ±3dB  Signal to Noise Ratio 58dB  Tone Controls Tone: -10dB at 10kHz  Line Outputs 250mV/3.5k  Speaker Outputs V  Digital Player MP3 Player with USB reader  Power Supply AC: V Hz, DC: V Car Battery  Dimensions W230×H95×D260 mm  Weight 4.5kg

Description Digital PAM8610 2*15W Dual Channel Stereo Class Amplifier Board 12V How to use: 1. The power supply voltage limit is 16.5V, do not use more than this voltage. 2. The power supply is recommended for 12v, 3A power supply filter better 3. 4-8 inch stereo speakers recommended. 4. Do not short-circuit the audio output to each other or shorted to ground. 5. Carefully check before electricity, ensure wiring is correct before electricity. Specification: Supply voltage: DC 7V-15V Output power: 10w + 10w (8 load) Efficiency: 90% Shutdown Current: 4uA Quiescent current; 20mA SNR: 86% Total harmonic distortion: 5W / 1KHz / 8 ---- 0.1% Frequency range: 20Hz-20KHz Input impedance: 15K Output Impedance: 4-8 Amplifier board size: 29mm * 25mm Color: Black   Package Contents: 1 * Digital PAM8610 Amplifier Board Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  skastores@gmail.com If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

Mini Digital DC 5V Amplifier Board Class D 2*3W USB Power PAM Audio Module : Amplifier Board Condition: New Size: 21mm x 19mm The rated working voltage is 5 V to 2.5 V, the working voltage is 5.5 V Please input 5V voltage, if you can Please don't connect the cathode on two side, and connect the load before using Excellent noise suppression Dual channel stereo, 5v power supply can output 3 w + 3 w power Can drive 4, 8 small speakers directly, big output power Unique without LC filter class D digital power board, can use computer USB power supply directly Double panel wiring, super mini design, can be easily placed

This amplifier plate adopts the official standard circuit design, chip selection USES is the United States imported original Long Ding micro class D power amplifier chip.This chip is strong not strong you can go to check its information.Good product chip share and the vast number of music lovers, this is our consistent principle!The power amplifier has a high efficiency, large power,

Pyle PDA35BT 100 Watt Mini Bluetooth Power Digital Class D Amplifier & Headphone Amplifier with Two Aux Inputs - 2 Channel Stereo Output - Portable Compact

Dear Our Buyers, We have Tie up Only with DTDC COURIER. IF you are from very remote place kindly check DTDC COURIER Service Locations using the URL: http://dtdc.com/sg_locationfind.asp and place the order.   ************************************************************** Coaxial SPDIF&Optical Toslink Digital to Analog R+L Audio Converter + 2RCA CABLE DIGITAL TO ANALOG AUDIO CONVERTER   TOSLINK TO TOSLINK CABLE 1.5METER   2RCA TO 2RCA CABLE 1.5METER         Introduction: This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink Digital Audio Signals to Analog L/R Audio Signals and connects to an external device, such as an amplifier via Standard RCA jacks. Features: Supports Uncompressed 2-channel LPCM Digital Audio Signal Output Supports Sampling Rate at , and 96 KHz 24-bit S/PDIF incoming bit stream on Left and Right Channels Provides electromagnetic-noise-free transmission Compact Size, Easy to install and Simple to Operate Specifications: Input Audio: Coaxial or Toslink digital audio signals to analog L/R audio Output Audio: L/R audio Input audio connector: 1 x Toslink, 1 x RCA (Coaxial) Output audio connector: 2 x RCA(R/L) Power input: AC V Hz Output: DC 5V 1A Product size: 51x40x26mm Package Contents: 1 x Digital to Analog Audio Converter 1 x 5V DC Power Supply 1 x User Manual   TOSLINK TO TOSLINK CABLE 1.5METER Fiber optic Digital audio cables carry Digital audio data

This is a very unique product which will take HDMI as an input and produce HDMI + Digital Optical Audio + 5.1 Channel Analog Audioas output signals.  This product is used for extracting Audio & Video from HDMI source and deliver video output: HDMI and 5.1 channel Audio output: Optical / 6 RCA. Features: 1. 1X HDMI input and 1X HDMI output，can sync separation HDMI audio signal. Supports 1x SPDIF optical digital audio output, 6 channel RCA analog audio output, and 1x headphone jack output. 2.Support HDMI input up to P/60Hz, supports 3D (fs) 3.Support CEC and HDCP 4.Supports 3 modes of EDID management for audio formats, can switch among built-in EDID (2CH/5.1CH) and external EDID (TV). 5.Uses 24 bit/96KHz audio DSP and 24bit /192KHz DAC 6.Support digital audio formats: Dolby digital (AC3), DTS, LPCM, automatic identification signal format 7.Headphone amplifier output, can drive the general 3.5mm earphone 8.High tone quality, low noise 9.DC5V/1A power adapter Specs Of Product: HDMI resolution............................................ up to P/fs（3D fs） Support video color format........................................24bit/deep color 30bit,36bit HDMI Audio Format...DTS-HD/Dolby-TrueHD/LPCM CH/DTS/Dolby-AC3/DSD Digital audio decode format................................Dolby Digital (AC3)/DTS/LPCM 2CH HDMI Max bandwidth............................................................................225MHz HDMI Max baud rate...........................................................................6.75Gbps Input/Output TMDS signal...............................................Volts p-p(TTL) Input/Output DDC signal.......................................................... 5Volts p-p (TTL) DSP sample frequency range........................................................... KHz DSP Bit rate range............................................................................ Bit Analog output level(1kHz@0dB)............................................................1V..  RMS SNR @ 0dB(CCIR/ARM)............................................................................≥85dB Distortion...............................................................................................≤0.1% Frequency response........................................................................20Hz~20KHz Headphone output power (1kHz@0dB  RL=mW HDMI input cable distance.................................≤15m AWG26 HDMI standard cable HDMI output cable distance..............................≤18m AWG26 HDMI standard cable Max working current................................................................................500mA Power adapter format Input......................... AC 100V～240V 50HZ/60Hz, DC5V/1A Operating Temperature range.......................................................... -10 to +55℃ Storage Temperature range............................................................. -20 to +60℃ Operating Humidity range...................................10 to 90%RH (No Condensation) Storage Humidity range........................................5 to 95%RH (No Condensation) Case Dimension (L x W x H)..................................................... 139x64x22 (mm) Weight................................................................................................... 220g Package: Main Unit: 1 User Manual: 1 Power Adaper: 1

Dear Our Buyers, We have Tie up Only with DTDC COURIER. IF you are from very remote place kindly check DTDC COURIER Service Locations using the URL: http://dtdc.com/sg_locationfind.asp and place the order.   ************************************************************** Digital Optical Coax Coaxial Toslink to Analog RCA L / R Audio Converter Adapter Introduction: This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink Digital Audio Signals to Analog L/R Audio Signals and connects to an external device, such as an amplifier via Standard RCA jacks. Features: Supports Uncompressed 2-channel LPCM Digital Audio Signal Output Supports Sampling Rate at , and 96 KHz 24-bit S/PDIF incoming bit stream on Left and Right Channels Provides electromagnetic-noise-free transmission Compact Size, Easy to install and Simple to Operate Specifications: Input Audio: Coaxial or Toslink digital audio signals to analog L/R audio Output Audio: L/R audio Input audio connector: 1 x Toslink, 1 x RCA (Coaxial) Output audio connector: 2 x RCA(R/L) Power input: AC V Hz Output: DC 5V 1A Product size: 51x40x26mm Package Contents: 1 x Digital to Analog Audio Converter 1 x 5V DC Power Supply 1 x Optical cable 1.5METER 1 x User Manual

Toslink Optical Digital to Analog Coaxial Analog R + L Audio Converter Digital Coaxial/ Toslink/ Optical to Analog R+L/2RC/RCA Audio Converter (LEO-DA24) Description:   This Digital to Analog Audio Converter is designed for either home or professional audio switching. It  converts Coaxial or Toslink digital audio signals to analog L/R audio  and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small

NEW Optical SPDIF/Coaxial Digital to RCA L/R Analog Audio Converter with 3.5mm Jack Support Headphone/Speaker Outputs The Digital to Analog Audio Converter is designed for either home or professional audio application. It converts To slink/SPDIF or Coaxial digital audio signal to analog L/R audio; it can support an external device such as an amplifier via standard RCA-style L/R jacks, and a stereo headphone via its 3.5mm jack at the same time. This small converter is plug and play. Features:-     1.      Convert DTS/AC3 source digital audio to analog 2.0ch stereo audio output. 2.      Multi-channel audio input (SPDIF,Coaxial) 3.      No need to install drivers, portable, flexible, plug and play.        Specifications 1.      Input ports:    1xToslink/SPDIF,1xCoaxial 2.      Output ports:   2xRCA(L/R), 1x3.5mmPhoneJack. 3.      Signal to Noise: 120db 4.      Degree of Separation: 85db 5.      Frequency Response: (20Hz ~ 20KHz) +/- 0.5db 6.      Dimensions(mm):   72(D)x55(W)x20(H) 7.      Weight (g):  40 Contains:- - Converter, Power supply, User Manual We have always tried to provide the best available and reliable product to each customer, however sometimes it may happen that the product does not meet your expectation

Analog to Digital Audio Converter analog L/R audio to Coaxial  This Analog to Digital Audio Converter is designed for either home or professional audio switching. It converts analog L/R audio to Coaxial or Toslink digital audio signals and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small

Optical Digital to Analog Audio Converter with Toslink Cable Brand New 100% Genuine Quality Product Description: This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R RCA audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. How it works: Simply plug

POWERED MIXER (WITH AMPLIFIER) DFX PHONIC POWER POD CHANNEL 200 WATTS High-volume headphone output  Description: The Powerpod 820 is a 12-input 200 Watt powered mixer with four mono Mic/Line channels and two paired stereo inputs. The ultra low noise pre-amps and 75 Hz (18 dB/oct.) low-cut filters ensure high fidelity sound and elimination of unwanted sounds like stage rumble, P-pops, wind noise and low frequency recording studio room resonance. A 3-band EQ on every channel and onboard DFX, our 32-bit digital effects processor, with 16 preset programs and parameter control give you maximum control over your mix. Two AUX sends per channel and two stereo AUX returns mean that you can combine the Powerpod 820 with a variety of signal processors and other equipment. Monitoring the mix is easy with dual 10-segment LED level meters and high volume headphone output. The added feature of Mini Stereo I/O makes this mixers perfect for anyone connecting MP3, MD or computer audio or recording devices. The Powerpod 820 is ideal for project studios, restaurants and other applications that demand power

Sony PHA-3 Portable Headphone Amplifier Features Powered with high-end D/A conversion technology Compatible with High-Resolution Audio formats (PCM 384 kHz/32bit and DSD) L/R balanced output Digital connection for Walkman®, Xperia®, iPhone/iPad/iPod® Features high quality components traditionally used for premium home audio Immerse

Specifications: Volume: 50x50x42mm (L x W x H without potentiometer handle), ultra-small size for any space. Over voltage: DC 9-15V, Recommended DC voltage of 12V, current 1A Power: 10W +10 W on 1  Amp 12 v supply. It can provide up to 15 watt on 2 Amp power supply (power supply also available http://www..in/itm/) Output impedance: 4-8 ohm When IC audio amplifier is used

Ships within 12 Business Days. Genuine Import from USA. The Pyle PDA35BT Compact & Portable Amplifier features built-in Bluetooth for wireless audio streaming ability. Connect & stream audio from all of your favorite devices like Smartphones, Tablets, Laptops and computers. This high-efficiency and high-powered mini system produces an impressive 100 Watt MAX power into 8 Ohms, or 50 Watt per channel. You will enjoy versatile sound processing with crisp sound reproduction at a fraction of the size. Additional features include rear panel RCA (L/R) outputs, Banana Plug speaker inputs, 3.5mm (AUX) input, along with a 1/4' headphone jack -- which makes this system double as a Headphone Amplifier. Enjoy compact, versatile and wireless sound amplifying ability with the Pyle PDA35BT Bluetooth Mini Amp. ShopYourWorld Our Terms & Conditions   Contact Details Email:  Customer Support No.:  + Store Timings:  Mon – Sat from 9:00 AM to 9:00 PM   Feedback & Detailed Seller Ratings Your feedback is very important

Ships within 12 Business Days. Genuine Import from USA. The Pyle PDA35BT Compact & Portable Amplifier features built-in Bluetooth for wireless audio streaming ability. Connect & stream audio from all of your favorite devices like Smartphones, Tablets, Laptops and computers. This high-efficiency and high-powered mini system produces an impressive 100 Watt MAX power into 8 Ohms, or 50 Watt per channel. You will enjoy versatile sound processing with crisp sound reproduction at a fraction of the size. Additional features include rear panel RCA (L/R) outputs, Banana Plug speaker inputs, 3.5mm (AUX) input, along with a 1/4' headphone jack -- which makes this system double as a Headphone Amplifier. Enjoy compact, versatile and wireless sound amplifying ability with the Pyle PDA35BT Bluetooth Mini Amp. ShopYourWorld Our Terms & Conditions   Contact Details Email:  syw@gmail.com Customer Support No.:  +91 22 6132 5050 Store Timings:  Mon – Sat from 9:00 AM to 9:00 PM   Feedback & Detailed Seller Ratings Your feedback is very important

Box Packed brand new with all accessories. No Warranty. Power output: 30Wpc into 8 ohms Inputs: Three digital (USB, SPDIF, TosLink); one analog Dimensions: 2.3" x 7.5" x 8.7" Weight: 4.6 lbs.

H > Products > D/A Converter D/A Converter AUDIOTRAK DR.DAC3 DR.DAC3, which is a technically perfect integration of the top level DAC and powerful dual headphone amps as well as having USB audio features that can build a computer based HiFi audio system, provides the most advanced digital audio solutions. It adopts the highest VT Envy USB Audio Controller by VIA Technologies, Inc., which supports USB 2.0 Hi-Speed (480 Mbps, asynchronous), to support 24bit / 192KHz