Eco light sensor

Proximity Light Sensor Power Button Flex Cable Replacement for iPhone 4 4G        . Best quality,  Condition: 100% Brand New      . Compatible with APPLE IPHONE 4 4G PREMIUM QUALITY ITEM TO REPLACE YOUR BROKEN OR NOT WORKING Proximity Light Sensor Power Button Flex Cable FOR APPLE IPHONE 4 4G    “Buy With Confidence".   Description 100% Brand new and high quality Proximity Light Sensor Power Button Flex Cable Ribbon for iPhone 4 4G. Replacing your original Proximity Light Sensor Power Button Flex Cable. Replacement and make your phone like new. All flex cables have been tested before ship. Note: We recommend that this item is installed by a specially trained technician, and we will not accept liability for any damages that may be caused by the improper installation of this accessory.  Included: 1 x Proximity Light Sensor Flex Cable for iPhone 4 4G. SHIPPING:- All the item we are selling is available

Proximity Light Sensor  Power Button  Flex Cable Replacement for iPhone 4S        . Best quality,   Condition: 100% Brand New     . Compatible with APPLE IPHONE 4S PREMIUM QUALITY Proximity Light Sensor Power Button Flex Cable FOR APPLE   IPHONE 4S  “Buy With Confidence".   Description 100% Brand new and high quality Proximity Light Sensor Power Button Flex Cable Ribbon for iPhone 4S Replacing your original Proximity Light Sensor Power Button Flex Cable  Replacement and make your phone like new  All flex cables have been tested before ship. Color: Black Note: We recommend that this item is installed by a specially trained technician, and we will not accept liability for any damages that may be caused by the improper installation of this accessory.  Included 1 x Proximity Light Sensor Flex Cable for iPhone 4S SHIPPING:- All the item we are selling is available

LOWEST PRICE IN   e b a y 10 TIMES MORE RELIABLE THAN OTHER CHINESE MODULE BEST FOR YOUR ROBOT / INDUSTRIAL  PURPOSE  /HOME & AUTOMATION 1 MONTHS REPLACEMENT WARRENTY IN CASE OF ANY PROBLEM DUE TO MANUFACTURING DIFFECT 4 Types of sensor Thermal, Magnetic, Flame & Light Sensor Module All modules have Four Pin 2 For Power & 2 For Output Digital & Analog. Also Have Output Led Indicator. Package Content Total 4 items 1 x Flame sensor module 1x Thermal Sensor Module 1x Digital Light Sensor Module 1x Magnetic Field Sensor Module Description: Thermal Sensor Module: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

LOWEST PRICE IN   e b a y 10 TIMES MORE RELIABLE THAN OTHER CHINESE MODULE BEST FOR YOUR ROBOT / INDUSTRIAL  PURPOSE  /HOME & AUTOMATION 1 MONTHS REPLACEMENT WARRENTY IN CASE OF ANY PROBLEM DUE TO MANUFACTURING DIFFECT  HIGH QUALITY FR-4 BOARD Light Sensor For Arduino / PIC / AVR Description Module Features:    1, Using sensitive photosensitive resistance sensor    2,The comparator output signal is clean, good waveform, driving ability, more than 15mA.    3, With adjustable potentiometer to adjust the brightness of the light detection    4,The working voltage 3.3V-5V    5, DUAL OUTPUT form: DO digital switching outputs (0 and 1) and AO analog voltage output     6,A fixed bolt holes for easy installation    7, PCB Size: 3.4cm x 4.0cm   8, Using a wide voltage LM393 comparator Product wiring instructions:   1, VCC positive power supply 3.3-9V   2, GND power supply is negative   3, DO TTL switching signal output     4, AO analog output Please contact us for any doubt.Please give us positive feed back.Your feed back is very important for us. Happy to help you.We shipped our material within 2 working days after getting confirmation of payment. contact us- Mob:-     (From 10 AM to 9 PM)    Powered by Turbo Lister

Description Package Includes: 1 Piece new  Digital Light Sensor Intensity Seek Module Photoresistor For Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Photo Resistor 3 Pin  Description Features:  • For Light intensity detected,light brightness sensors, Smart car module  • Using the sensitive type photosensitive resistance sensor  • Waveform of the comparator output signal is good,strong driving ability  • With adjustable potentiometer can adjust and detect the brightness of the light  • Come with bolt holes for easy installation Specifications:  • Using the sensitive type photosensitive resistance sensor  • The comparator output signal clean waveform is good, driving ability, than 15mA.  • With adjustable potentiometer can adjust the brightness of the light detected  • Working voltage 3.3V-5V  • The output form: DO digital switching outputs (0 and 1)  • With bolt holes for easy installation  • A small board PCB size: 3.2cm x 1.4cm  • Using a wide voltage LM393 comparator  Module for Use:  1 The photosensitive resistor module most sensitive to ambient light, generally used to detect the brightness of the ambient light, triggering micro-controller or relay modules;  2 The module brightness of ambient light reach the set threshold, DO-side output high when the ambient light level exceeds the set threshold, DO-ended output low;  3 DO output can be directly connected with the micro-controller through the micro-controller to detect high and low, thereby detecting changes

Other Items Feedbacks About Us Contact Us Add To Favorites CNBPc LDR Light Dependent Resistors 12mm Photoresistor LDR, Light Sensor  Features  Type:  Light Dependent Resistor LDR 12MM Photoresistor Epoxy encapsulated ▲ Quick response ▲ Small size ▲ High sensitivity ▲ Reliable performance ▲ Good characteristic of spectrum Light Resistance at 10Lux (at KΩ Outline  Dark Resistance at 0 Lux 1.0MΩ(min)  Gamma value at Lux 0.7  Power Dissipation(at mW  Max Voltage (at V  Spectral Response peak (at nm  Ambient Temperature Range: ﹣℃ Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

Light Sensitive Audio Oscillator kit is a fun loving kit which will create different sound effects depending on the light falling on the sensor (LDR). Supply input 5 ~ 12 VDC Output 8 Ohms, 0.5 W Speaker Terminal pins for supply voltage and speaker connection Power-On LED indicator PCB dimensions 38 mm x 44 mm DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram    Note: KOTEQ offers custom design and modification services for most of our  products, please contact us    for  specific requirement.

Mighty Light Indoor Outdoor Motion  Sensor  Activated LED Light Weathr Proof About this product -  Mighty Light Indoor Outdoor Motion Sensor Activated Emergency LED Light mighty light     Infrared LED sensor light   Movement activated Passive Infra Red (PIR) light switches itself  on as you approach, and automatically switches off 20 seconds after you leave.  Scans 90 degrees side to side up to 6-8 meter out from the sensor. Daylight sensor  eliminates daytime operation   Feature: (1) Infrared sensor light with 3 LEDS (2) Super sensitivity (3) LED Life> H (4) LED brightness >) Turn off automatically after 15 seconds (6) No wiring needed On 27-Feb- at IST, seller added the following information:

TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.  The TCS has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color.  Specifications Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency Power Down Feature Communicates Directly to Microcontroller S0~S1: Output frequency scaling selection inputs  S2~S3: Photodiode type selection inputs OUT Pin: Output frequency OE Pin: Output frequency enable pin (active low), can be impending when using Support LED lamp light supplement control Size: 28.4x28.4mm Recognition color principle of sensor To TCSD, when choose a color filter, it can allow only one particular color to get through and prevent other color. For example, when choose the red filter, Only red incident light can get through, blue and green will be prevented. So we can get the red light intensity. Similarly,when choose other filters we can get blue or green light. TCSD has four photodiode types. Red, blue, green and clear, reducing the amplitude of the incident light uniformity greatly, so that to increase the accuracy and simplify the optical. When the light project to the TCSD we can choose the different type of photodiode by different combinations of S2 and S3. Look at the form as follows. The TCS Color Sensor TCSD can output the frequency of different square wave (occupies emptiescompared 50%),different color and light intensity correspond with different frequency of square wave. There is a relationship between the output and light intensity. The range of the typical output frequency is 2HZ~500KHZ. We can get different scaling factor by different combinations of S0 and S1. Look at the form as follows. The TCS Color Sensor Connection Diagram The TCS Color Sensor If you want to turn on the LEDs on the board, you could connect the led pin to 5v or a digital pin to drive them.  

hello all customersssss   my all items cash on delivery available please check your area [call customer support ]   marketing by patel groupe     all india fast service whatsaap & call any time  1] ,   2]                  Your  Favorite Seller is Now  P o w e r s e l l e r, Thanks to all My Customers   Description: 100% brand new and high quality Material: Leaf: Plastic,Mushroom: Silicon Color: whit and as a picture show [as per available] Light color: Light color changes among some colors randomly LED technology applied Light brightness will change automatically according to light source brightness: the darker the light source, the brighter the lights Extremely low power consumption (ONLY 0.5W) Pot made from ceramic imitation: smooth, glossy, lightweight and shatter-resistant Ideal desk lamp, decoration light, night light, bedside lamp, gift Light type: LED Light color: Light color changes among some colors randoml Leaf: Green Input voltage: 110V-220V Cinsumption: 0.5W Size: 53 Quantity: 1 Pc Note: The EU (I NDIAN)Plug is  standard ONLY!       Quantity:      [hellooooooooo sir please read]                        1 pcs auto  sensor night lamp   [color whit and pink as per available]                                                  limited offersssssssssssssss buy 2 get 1 pcs free [2 pcs order = 3 pcs auto sensor night lamp] buy 4 get 2 free [4 pcs order = 6 pcs auto sensor night lamp] buy 6 get 3 free [6 pcs order = 9 pcs auto sensor night lamp] 1  pcs order =  1 pcs 2  pcs order =  3 pcs 3  pcs order =  4 pcs 4  pcs order =  6 pcs 5  pcs order =  7 pcs 6  pcs order =  9 pcs Shipping will by PowerShip program BY BlueDart/  FedEx  only.   IMPORTANT NOTE        [please read sir]   The Courier Partner is Chosen Automatically   e B a y  Based   So Please Co-Operate With Us In Giving You the Best Service.          ADDRESS  CHANGE IS ALSO NOT POSSIBLE  AFTER PLACING THE ORDER                                              Provide Best Products at  G enuine rates at your Door step                         We will be provide technical support if you have any problems

Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS3200 has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS3200 color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

GY-31 TCS230 TCS Color Sensor Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.  • The TCS has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color.  • Single-Supply Operation (2.7V to 5.5V)  • High-Resolution Conversion of Light Intensity to Frequency  • Programmable Color and Full-Scale Output Frequency  • Power Down Feature  • Communicates Directly to Microcontroller  • S0~S1: Output frequency scaling selection inputs  • S2~S3: Photodiode type selection inputs  • OUT Pin: Output frequency  • OE Pin: Output frequency enable pin (active low), can be impending when using  • Support LED lamp light supplement control  • Size: mm Package Info 1 X Pc TCS230 TCS Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Uses:Humidity detection, humidity sensors, humidity detection the working voltage 3.3V-5V the output form: DO digital switching outputs (0 and 1) and AO analog voltage output the comparator output signal is clean, good waveform, driving ability, more than 15mA a small PCB board size: 3.2cm x 1.4cm Module Features:  1, using high-quality HR202 humidity sensor;  2, the comparator output signal is clean, good waveform, driving ability, more than 15mA;  3, adjust the temperature distribution position detection threshold;  4, the working voltage 3.3V-5V;  5, the output form: DO digital switching outputs (0 and 1) and AO analog voltage output;  6, a fixed bolt holes for easy installation;  7, a small PCB board size: 3.2cm x 1.4cm;  8, using a wide voltage LM393 comparator.  Product wiring instructions:  1, VCC positive power supply 3.3-5V  2, GND power supply is negative  3, DO TTL switching signal output  4, AO small plates analog output (voltage signal)  Module for use  1, the humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity;  2, by adjusting the potentiometer, for detecting the humidity can change the threshold (i.e. the humidity control), such as the need to control the ambient humidity of 60%,then the corresponding module is transferred to the green light and humidity environment, DO high power output when flat, humidity values below this setting, high output, the green light does not shine;  3, DO output can be directly connected to the microcontroller through the microcontroller to detect high and low, thereby detecting the humidity changes

Description: The sensor module light is adaptable to the environment, it has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal (a low level signal), can be through the potentiometer knob adjust the detection distance, effective distance range 2 ~ 30cm, working voltage is 3.3V to 5V. The sensor detection range can be through the potentiometer to adjust and have small interference, easy to assemble, easy to use, etc, can be widely used

Item Description: Specifications: Color:  White Quantity:  1 pc Voltage:  AC 180V-240V Output:  Relay Load power:  200W Induction distance:  3 m - 8 m Induction angle:  120° Light intensity of illumination:  6 Lux Time extension:  30s±10s Switch Dimension： 7.45 x 3.85 x 2.8c m / 2.93 x 1.51 x 1.1":  Feature:  (1)Infrared technology based automatic motion sensor switch. (2)Automatic turn ON/OFF while detected people come or left. (3)Automatic locked