Electronics amplifier

Its real power 1000 Watt pmpo and 250 w RMS mosfet based amplifier have some extra features like high input impedance, high band width, high gain, high slew rate, high linearity, high efficiency, high stability etc. It tested by our team and we are extremely pleased by its performance and also ruggedness as far as maintenance and handling is concerned.. All capicator are of branded for high performance and longer life. Best part is the entire circuit utilizes commonly available components. maximum v input 27 vLength:10cmWidth: 10cmFeatures and benefits of mosfet based Amplifier Good Bandwidth. The range of frequency that an amplifier can amplify properly is called the bandwidth of that particular amplifier. Good Gain. Gain of an amplifier is the ratio of output power to the input power. It represents how much an amplifier can amplify a given signal Better Efficiency. Efficiency of an amplifier represents how efficiently the amplifier utilizes the power supply. Good Stability. Stability is the capacity of an amplifier to resist oscillations. These oscillations may be high amplitude ones masking the useful signal or very low amplitude. Slew rate. Slew rate of an amplifier is the maximum rate of change of output per unit time. It represents how quickly the output of an amplifier can change in response to the input. Linearity. An amplifier is said to be linear if there is a linear relationship between the input power and the output power. It Low Noise. Noise refers to unwanted and random disturbances in a signal. In simple words, it can be said to be unwanted fluctuation or frequencies present in a signal. Output voltage swing. Output voltage swing is the maximum range up to which the output of an amplifier could swing. Input Supply: It takes wide range of input supply 24 to 30 volt. Tested on 18-0-18 v and 24-0-24, 5 Amp or 10 Amp Transformer (not included) Input sound: two channel stereo Output sound: mono sub output(Note: This kit is not for novice electronics hobbyist. All common kit are attached (all potentiometer) and everything mention on board but still proper knowledge about the subject is required to understand and make the complete project. We do not held any responsible for any issues or help either due to negligence, ignorance or lack of proper knowledge about the subject.)  Package: 1 x Audio subwoofer Amp Board

Marcmart About Us | Feedback | Contact Us Payment | Shipping Policy | Return & Warranty | About Replies | Feedback Hot Categories Item ship from USA Industrial Motorbikes Electronics DIY Home & Garden Pet Supplies Computing Other Hot products Electric Guitar Effect Padel Digital Mini Power Amplifier Cree LED Mining Light RF Wireless Weather Station Mini TV BOX Lilliput LCD Monitor 20Wx2 Tripath TA T-AMP MIni HiFi Digital Power Amplifier w/ US Power Adapter US STOCK (US-AM233) Click an image to Enlarge Description Payment Shipping Policy Return & Warranty About Replies Feedback Features: Uses the Class-T Tripath TA Audio Amplifier IC for low distortion,acoustically accurate reproduction of music. Tone/Direct switching allows for customized listening via separate Bass and Treble adjustments or original audio source signal can be passed through without enhancement. Built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect speakers from high volume bursts of audio. Over-voltage protection circuit shuts down amplifier should input voltage exceed 14.4V DC. Mini size easy to installation by DIY without manual, especially good fit for car, motorcycle,bike,boat, every where! Support AUX stereo audio Input,Can be plug

A complete high quality, low noise stereo audio 5.1 power amplifier based around the Hybrid STK4392 and tda 2030 Integrated Circuit. The amplifier has a maximum music output power of 30 W per channel and 200 W subwoofer out. Can be used for 8 Ohm speakers important: Be carefull about short circute it may damage your entire circute (Note: This kit is not for novice electronics hobbyist. All common kit are attached (all potentiometer) and everything mention on board but still proper knowledge about the subject is required to understand and make the complete project. We do not held any responsible for any issues or help either due to negligence, ignorance or lack of proper knowledge about the subject.) Package: 1 x Audio subwoofer Amp Board

This is a Brand New as50D marshall acoustic amplifier. The amp has minor damage that was caused while shipping. The damage does not affect the sound or the electronics in any way. This is being sold out of a Musical Instruments shop which provides a warranty for the amp. The Mrp Of the Amp is 40000 and there is a considerable discount on it.

The TTC5200 from Toshiba is a through hole NPN silicon transistor in TO-3P package with high collector voltage. This device is commonly used for power amplification. Collector to emitter voltage (Vce) is 230 V Collector to base voltage of 230 V Collector current (Ic) is 15 A Power dissipation (pd) is 150 W. Junction temperature of 150°C. Current gain of 35 at 7A collector current. Collector to emitter saturation voltage of 3V. Collector to emitter breakdown voltage of 230V USE A COOLING FAN WHEN ASSEMBLING IMPORTANT: THIS CIRCUTE IS DISIGNED WITH INBUILT SPEAKER PROTECTION SO YOU MUST GIVE A 12 V TO SPEAKER PROTECTION CIRCUTE SEPARATELY THEN ONLY THE CIRCTE WORK.THE PORTION MARKED IN THE CIRCUTE POWER SUPPLY -27-0-27 V 12 V DC SPEAKER (Note: This kit is not for novice electronics hobbyist. All common kit are attached (all potentiometer) and everything mention on board but still proper knowledge about the subject is required to understand and make the complete project. We do not held any responsible for any issues or help either due to negligence, ignorance or lack of proper knowledge about the subject.) Package: 1 x Audio subwoofer Amp Board

The TTC5200 from Toshiba is a through hole NPN silicon transistor in TO-3P package with high collector voltage. This device is commonly used for power amplification. Collector to emitter voltage (Vce) is 230 V Collector to base voltage of 230 V Collector current (Ic) is 15 A Power dissipation (Pd) is 150 W. Junction temperature of 150°C. The current gain of 35 at 7A collector current. Collector to emitter saturation voltage of 3V. Collector to emitter breakdown voltage of 230V USE A COOLING FAN WHEN ASSEMBLING IMPORTANT: THIS CIRCUIT IS DESIGNED WITH INBUILT SPEAKER PROTECTION SO YOU MUST GIVE A 12 V TO SPEAKER PROTECTION CIRCUIT SEPARATELY THEN ONLY THE circuit WORK.THE PORTION MARKED IN THE CIRCUIT POWER SUPPLY -27-0-27 V 12 V DC SPEAKER (Note: This kit is not for novice electronics hobbyist. All common kit is attached (all potentiometer) and everything mentions on board but still, proper knowledge about the subject is required to understand and make the complete project. We do not hold any responsibility for any issues or help either due to negligence, ignorance or lack of proper knowledge about the subject.) Package:  1 x Audio subwoofer Amp Board                   1 X LOW PASS FILTER                   1 X VOLUME CONTROLE                   1 X RC JACK

QR Code Link to This Post Selling my bose acoustimass 16 series ii http://www.thrillingaudio.com/Bose_Acoustimass_16_II_Surround_Speaker_System_p/bose%20am-16%20ii.htm Onkyo Amplifier https://www.eu.onkyo.com/en/products/tx-sr706-34935.html and Optoma full HD projector. Reason for selling: moving out

GONSALVES COMPUTERS AND ELECTRONICS Andheri East, Mumbai (Sunday Open) Contact Person - Mr. Nevis Gonsalves - 97684six2271 Website: gonsalvescomputers google site Repairing Done of - Amplifiers, Speakers, Desktops and Laptops. (Matching The Amplifier with Speakers) Specifications: Stereo Amplifier for Rs 600/- only with 1 year warranty 1) Play USB, Aux IN, SD Card,FM Radio with Remote. 2) Supply voltage: AC 250Volt / DC 12V 3) Display screen: 3 digit LED 4) Output Mode: Stereo 5) Output Power: 700w pmpo (350 w each channel) 6) FM Range: Digital 7) Front Controls: Volume / Bass / Treble 8) Power input: AC mains with option of 12 v DC min 2 amp (Transformer included) 9) Speaker: inbuilt 4 inches" speaker. (can connect one external speaker maximum 6 inches) 100% Best sound quality. 0% Distortion. Effect is better than any home theatre.

YAMAHA R-S202 STEREO RECEIVER Advanced circuitry design Bluetooth ® to your favorite streaming music services 40 station FM/AM preset tuning Brushed aluminum finish and simplistic design Speaker selector for two systems Simple remote control layout Headphone terminal BILL + 1 YEAR YAMAHA INDIA WARRANTY VALID ALL OVER INDIA Yamaha, the most trusted brand in home audio, adds Bluetooth® compatibility in this Hi-Fi receiver for easy wireless access to streaming music services and music on your smartphone or other devices. Enjoy the connectivity and the outstanding and legendary quality of Yamaha natural sound. Heritage of Technical Expertise Rooted in technology and expertise. The R-S202 was created from years of experience and technological expertise in receiver design. With a music heritage that runs over 125 years deep, our passion and reputation for Hi-Fi was born from the music side and extended into electronics. The concept of natural sound is based on reproducing music as it would be experienced live. Built with scrupulous care from the circuit design to basic sound reproduction, the R-S202 reproduces high-quality, musically-rich sound for the entry level consumer. High-Power Output Never peak. The R-S202, with two channels of 100 W high-power output* that are above its class, has a high-quality sound design that minimizes the length of signal routes and optimizes the circuit layout. Positioning the power transformer near the amp circuit reduces power loss while improving peak power supply capacity to enable high volume output. The signal ground and power supply ground connect at one point, eliminating mutual interference to achieve a higher S/N ratio. The result is sound clarity stripped of noise and other signals. *8 ohms, 40 Hz-20 kHz, 0.2% THD Bluetooth ® to Streaming Music Services Connect wirelessly. The R-S202 provides Bluetooth functionality to let you enjoy streaming music from smart phones and other devices. Use your device to select the songs from your library and hear them with the legendary quality of Yamaha sound. 40 Station AM/FM Preset Tuning All your stations. Register up to 40 favorite FM and AM stations, then conveniently select them from either the receiver or the remote control. Auto preset lets you automatically search for and register FM stations. Frequencies appear on the display, so when you want to listen to a new station, you can quickly and easily dial it in. Simple and Sophisticated Design Less is more. The R-S202 inherits the simple, sophisticated design style for which Yamaha Hi-Fi audio is famous. With an elegant brushed finish, it harmonizes beautifully with other audio equipment. The Yamaha commitment to beauty and sophistication are demonstrated in the finish and ease of control, giving the user a premium audio experience. Speaker Selector Check one, two. Equipped with speaker terminals for two systems, this receiver lets you connect two sets of speakers. The speaker selector makes it easy to switch between outputs, allowing you to hear the sound from one speaker system (A or B) or both (A+B). Try the Yamaha NS-6490 bookshelf speakers and the YST-SW216 powered subwoofer with the R-S202 for an ultimate stereo system. Power Saving Go Green. A power management function automatically switches to standby mode. It can be set to two, four, eight or 12 hours or turned off. Power consumption during standby is only 0.5 W, achieving good energy saving performance. Other Notable Features • Simple remote control layout • Headphone terminal Receiver / Integrated Amplifier Network section Bluetooth Yes (SBC / AAC) Rated Output Power (8 ohms, 40 Hz-20 kHz, 0.2% THD) 100 W + 100 W Maximum Power(8 ohms, 1 kHz, 10% THD) 140 W + 140 W High Dynamic Power / Channel (8 / 6 / 4 / 2 ohms) 125 W / 150 W / 165 W / 180 W Frequency Response 10 Hz – 100 kHz (0 ± 0.5 dB / 0 ± 3.0 dB) Total Harmonic Distortion (CD to Sp Out, 20 Hz - 20 kHz) 0.2% Signal-to-Noise Ratio (CD) 100 dB (500 mV) Input Sensitivity (CD) 500 mV / 47 kΩ FM 50dB Quieting Sensitivity (IHF, 1 kHz, 100% Mod., Mono) 3 μV (20.8 dBf) FM Signal-to-Noise Ratio (Mono / Stereo) 71 dB / 70 dB Standby Power Consumption 0.5 W Dimensions (W x H x D) 17-1/8” x 5-1/2” x 12-5/8” Weight 14.8 lbs. ANY OCTROI PAYABLE WILL BE BORNE BY THE BUYER. IN CASE OF ANY INQUIRIES OR COMPLAINTS PLEASE CONTACT US AT +918800163686  OR rhythmics5@gmail.com   YOUR POSITIVE FEEDBACK HELPS OUR BUSINESS GROW. SO IF YOU ARE SATISFIED WITH OUR PRODUCT AND SERVICES THEN PLEASE DO LEAVE A FEEDBACK. THANK YOU.