Firmware

Product Discription: *   THIS FTDI TO USB TOOL IS USED TO UPLOAD OR UPGRADE  FLIGHT CONTROLLER FIRMWARE (SOFTWARE)  1.    Newest CRIUS MWC MINIUSB FTDI TOOL USB PC Firmware Programmer Breakout Arduino USB-TTL 6 PIN 3.3 5V 2.    For: MWC Flight Controller - MultiWii Lite /SE / SE v% Brand new Specifications: With a miniusb cable,make the operation easier. FTDI TOOL 5V USB to TTL upload tool, can be connected with MultiWii flight control board directly, easy to upgrade or modify. Package content: 1 x FTDI TOOL USB Frimware Programmer

Product Discription: 1.    Newest CRIUS MWC MINIUSB FTDI TOOL USB PC Firmware Programmer Breakout Arduino USB-TTL 6 PIN 3.3 5V 2.    For: MWC MultiWii Lite /SE / SE v% Brand new Specifications: With a miniusb cable,make the operation earlier. FTDI TOOL 5V USB to TTL upload tool, can be connected with MultiWii flight control board directly, easy to upgrade or modify. Package content: 1 x MultiWii Flight Control Board config Uploader FTDI TOOL USB Frimware Programmer

Ps4, 1TB, 15+ games, 2 controllers, 5.05 firmware, 1.5 years old. Selling because got a pc. Do not negotiate don't contact if out of your budget

parfect conditions with box and original earphones tv out 20 games 8 gb and 4 gb and 2 gb memory card rear use with cover hurry up whatapp be Karo ex change only Sony Mobile or ps vita

ps3 multiman 320 gb with a lots of game in a very good condition is on sale. only genuine buyers can contact. price is negotiable.

  Up for sale is a Nintendo 3DS Handheld Console. It is of USA region. I have cared well for this item and kept it close to new condition. The handheld has original HORI screen protectors applied day 1. Also, the outer body of the 3DS has Capdase lamination guards applied on both top and bottom. The buttons are all functional and crisp. The battery backup is great. It comes with the original box and all the manuals and papers. The Hori screen protector is already applied so that packaging

Ps4 4.55 orignal with 26 games games with warrenty 1000 gb Games nfs payback and much more

Don't ask for number before ageeing with the price. Lowballers stay away

This Radio Telemetry kit offers a great low price, longer range (approx. 1.5km with supplied antennas) and superior performance. The system utilises the 915Mhz band and provides a full-duplex link using HopeRF's HM-TRP modules running custom, open source, firmware. The SiK firmware includes a boot loader that permits radio firmware upgrades over the serial interface, and configuration of system parameters. Firmware upgrades and configuration are fully supported

Upgrade version USB Firmware Loader USBasp Programmer  for KK flight control multicopter Board     USB Firmware Loader USBasp Programmer for KK multicopter Board KK board AVR USBasp ISP + 6 pin adapter   The USB Firmware Loader / Programmer (USB ASPa) is the hardware utility.   You can use it to change the flying mode of a KKmulticopter board by re-programming the internal flash of the board.  

Thrustmaster Ferrari T150 Force Feedback Racing Wheel and Pedal (PS4, PS3, PC) (Pre-owned) Description Product Country of Origin: This is a pre-owned product, purchased from Individual in India -Fully tested and comes with 7 Days warranty -May not include original box For PS4, PS3 and PC. Force feedback. 1080 degree base with TouchSense immersion technology. Return of force, angle of rotation adjustable, high-precision optical reading (12 bits adjustable resolution – 4096 values in the axis of direction), mixed at strap and metal gears with axe on ball bearings.   Officially licensed for PlayStation 4, PlayStation 3, with buttons for PlayStation 4 (PS/share/options) and the automatic recognition of the steering wheel by the PS4 system Officially licensed Ferrari Also compatible with PC (Windows 10/8/7/Vista/XP), internal memory and ability to upgrade the firmware Compatible with T3PA, T3PA Pro (Thrustmaster three pedals add-on) and the gear box Thrustmaster TH8A 28 cm in diameter, when the handles with rubber texture coating, designed to accommodate for all driving racing games Two large palettes of fixed speed sequence of events on the wheel (13 cm), all-metal construction, 13 action buttons plus a multi-directional cross Large foot lever optimized, adjustable angle of each pedal and brake pedal with progressive resistance   PlayStation®4-certified embedded software and PS4™/PS3™ sliding switch Official embedded software: the racing wheel is automatically recognized by the PS4™ console Compatible in the console’s menus PS4™/PS3™ sliding switch for optimal compatibility on both systems   Also compatible with PC PC compatibility (Windows® 10/8/7/Vista/XP) ensured thanks to the Thrustmaster drivers available for download from the http://ts.thrustmaster.com/ website. The drivers allow you to make sure that you always have the latest firmware version available for the racing wheel’s base.   1080° force feedback base featuring Immersion TouchSense® technology Drive system with adjustable Force Feedback lets you feel every detail while you’re racing (the road or track’s relief, loss of tire grip, braking, bumps and impacts, etc.). Rotation angle adjustable from 270° to 1080°! Very precise wheel: optical reading with 12-bit resolution (i.e. 4,096 values on the wheel’s steering axis) Mixed belt-pulley and gears system Smoother, more fluid and less noisy than helical gears with metal ball-bearing axle (for enhanced sturdiness) Internal memory and upgradeable firmware Robust and versatile attachment system, compatible with all mounts (desks, tables, etc.) Realistic wheel Built-in official buttons for PlayStation®4 (PS/SHARE/OPTIONS) Access social functions, switch between the game and the system,navigate through the console’s menus, etc. 11”/28 cm in diameter, with an ergonomic design perfectly adapted for all driving games (GT, F1, NASCAR, Rally, etc.) Rubber-coated wheel grips 2 large, wheel-mounted sequential paddle shifters 5”/13 cm tall – 100% metal – Tact switch with life cycle exceeding 500,000 activations Comprehensive driving gear 13 action buttons (including 2 on the base) + 1 D-Pad   Large, optimised pedal set Pedals with wide foot rest Each pedal’s angle of inclination can be adjusted Brake pedal with progressive resistance  

What’s special about this Mobius ActionCam? (Please clear your doubts before biding.) 1. Small and light. It has a quality fisheye lens with outstanding image quality and minimum fisheye distortion. Shoot footage that is sharp from corner to corner with uniform brightness.  Good  low-light performance as well. 2. Camera ships with most updated and stable firmware, and will work perfectly out of box. Don’t worry about the complicated settings (actually it’s not complicated at all, you will find it fun and easy later). 3. This camera has below settings for current firmware, and there will be more

Description After SimonK now latest ESC with firmware BLheli Series specially for QuadCopter & Multirotor  

SteelSeries sensei lazer gaming mouse is an ambidextrous shaped, plug-and-play, gold-plated USB connector mouse for gamers aiming accuracy and quick response. It comes with programmable macro buttons and features sophisticated firmware that allows for multiple adjustments of the sensor functionality to meet users' specific needs. Includes three zone lighting for scroll wheel, CPI indicator, and logo, has the ability to save different profiles on board and a LED panel to customize mouse on the fly.

before placing the order call me Features: - Supported MegaPirateNG and MultiWii firmware - Up to 8-axis motor output - 8 input channels for standard receiver - 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry - 2 servos output for PITCH and ROLL gimbal system - A servos output to trigger a camera button - 8 Analog port for Airspeed Sensor/Current & Voltage Sensor/LED controller - User-defined pads D & PG1~PG5 - A I2C port for extend sensor or device - Separate 3.3V and 5V LDO voltage regulator - Onboard 16Mbit Dataflash chip for automatic datalogging - ATMega AU Microcontroller - MPU axis gyro/accel with Motion Processing Unit - HMCL 3-axis digital magnetometer - MSBA01 highprecision altimeter - FT232RQ USB-UART chip and Micro USB receptacle - PCADP1 logic level converter for I2C Match the standard of RoHS Flight modes for Multiwii One of the following basic mode - Acro - Level - Alt Hold - Head Lock - Optional mode - HeadFree (CareFree) - GPS Hold (Need GPS receiver or Extend Board) - GPS Back to home position (Need GPS receiver or Extend Board) Flight mode for MegaPirate - Acro - Alt Hold - Simple - Loiter (uses GPS) - Guided (uses GPS) - Position (uses GPS) - Circle (uses GPS) - RTL (uses GPS) - Auto(uses GPS) - Follow Me(uses GPS) Input power selection One of the following way - Connect 5V power cable from ESC or UBEC to the ESC/Servo port, the J1 jumper must be closed. - Connect 5V~12V power cable to the extend power port, the J1 jumper must be removed. When using Extend Board, AIO PRO must be powered from the extend power port. General Dimension: 50mmX50mm Height: 11.6mm Weight: 14.2g Fixing hole spacing: 45mm Hole diameter: 3mm Package content ALL IN ONE PRO Flight Controller x 1 3Pin to 1Pinx3 cable 100mm x 3 3Pin to 3Pin cable 100mm x 1 Molex 1.25mm 4Pin cable 100mm x1 Molex 1.25mm 6Pin cable 100mm x1 Molex 1.25mm 8Pin cable 100mm x2

CC3D Board CopterControl from the OpenPilot project introduces a new generation of multi-purpose aircraft stabilization platforms. The CC3D boards is an all-in-one stabilization hardware flight controller, which runs the OpenPilot firmware. It can fly any airframe from fixed wing to an octocopter and is configured and monitored using the powerful and user friendly OpenPilot Ground Control Station (GCS) software. The CC3D is an update to the original Copter Control board, now using the powerful single chip IMU. The board shares a lot with the Revolution platform, including the powerful OpenPilot architecture and the cross-platform Ground Control Station (GCS). The CopterControl platform has been designed from the ground up to perform a host of functions from auto-level, multi-copter, Fixed wing UAV’s and even Flybarless Helicopter support. The new included Flexiport provides either I2C connectivity or a second serial port. OpenPilot has made their flight controller as easy and trouble-free as possible. The Open Pilot project, whilst still young, it's trying to make Open Source much more user friendly. You won’t need to buy add-on boards or extra chip programmers. Don’t be fooled by the price. CopterControl provides comparable functionality to other high-end autopilots at a small fraction of the cost. Commercial projects will charge what they can get away with, regardless of quality or features. The non-profit OpenPilot project is different. Consider getting involved and helping the progress. The HobbyKing CC3D board is fully authorized by OpenPilot and built with quality import parts, (unlike the cheap copy boards that can suffer from voltage fluctuations). A portion of the sales of each unit is donated back to the OpenPilot project Specifications Size: 36x36mm Weight: 5.7g Mounting: M3 holes @ 30.5mm square Features: • MultiRotor controller with auto-level, including TriCopters, QuadCopters and HexaCopters • Flybarless Helicopter controller with auto-level • Fixed Wing UAV controller • Powerful STM-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM • 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer • Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. • Software support for Windows, Mac and Linux • Direct high speed USB support with no drivers required, a truly plug and play device. • Spektrum satellite receiver support • Futaba S-BUS hardware support and PPM • Innovative Flexi-port technology for superior port flexibility • 4Mbits on-board EEPROM for configuration storage Returns In case Product is faulty Buyer must notify us within 24 hours of delivery time and can return within 2 days for a Replacement Or Refund. Returns will be accepted only when products are sent

ITEM - PS3 80gb fAt not working (motherboard issue) CONDITION OF THE ITEM - AS SHOWN IN THE PIC ABT THE ITEM -PS3 FAT CONSOLE ONLY...DRIVE AND PSU WORKS FINE ISSUE WITH MOTHERBOARD OVERHEATING WHICH CAN BE REPAIRED....NO CHORDS NO CONTROLLER MOTHERBOARD WAS ON FIRMWARE 3.55 RETURNS-- NO RETURNS ACCEPTED Our products are second hand and may have areas of sunfade and discoloration. Please be aware of this before making any purchases

PSP E- year old,but very little used.. Hardly times. Along With Carrying case (Pouch), Original charger and 8 GB memory card. Custom Firmware.. Can be playable in Memory Stick. Some PS 1 games and 20 plus High quality PSP games.. PS 1 games: Brain Lara Cricket '99. Resident Evil 3. Dinocrisis 2, Dinocrisis 1. PSP games: 20 games including Silent Hill origin, Silent Hill Shattred Memories, Brain Lara cricket , Dead to Recon, Street Cricket 1&2, GOD, NFS, and other famous games..

The Turnigy Accucel 6 Balance Charger utilises quality FET's and resistors to accurately balance and charge LiPoly, LiFe, LiHV, NiMH, Nicd and Lead Acid batteries. If you are looking for a charger for your Bolt batteries this unit is perfect as a low cost, go anywhere solution. The Accucel-6 will handle LiHV/LiPoly/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage throughout the charge cycle. The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately. And because this is a 12v DC charger you can power it up at the field using a 12v car battery or at home with a 12v power supply. It is also able to connect this charger to your PC using a USB cable (not supplied) so you can monitor pack voltage, cell voltage and other data through real-time graphs during charging. You can also control charging and update firmware from "Charge Master". Also included with the Accucel-6 are input and output wires with  XT60  plugs. ATTENTION. There are several chargers now entering the China market that look similar to the Accucel. These chargers are produced with cheaper FET's and are unfortunately much less accurate and very unsafe. There has been reports of the copied chargers over-charging packs and not balancing correctly. The Accucel-6 is the first charger

Combo Pack Specifications This package includes: Emax 12A ESC Speed Controller SimonK Firmware For FPV 250 QAV250 Quadcopter HeatShrink Tubes(Black(1Pcs)+Red(1Pcs)) 3.5mm Gold Bullet Connectors 3 Pairs (3pcs Male + 3Pcs Female) KV Brushless Motor For 250mm QAV250 Quadcopter (1Pcs) Returns In case Product is faulty Buyer must notify us within 24 hours of delivery time and can return within 2 days for a Replacement Or Refund. Returns will be accepted only when products are sent

CC3D EVO CopterControl Hardware Features With a function of being directly plugged into the satellite receiver(It needn't conversion cable) Powerful STM-bit micro controller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac and Linux. Direct high speed USB support with no drivers required, a truly plug and play device. Spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage. Flexiport CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs. Superior user experience OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with boot loader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe. The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it! Sensors and Components 3-axis Gu Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers. Simultaneous support for multiple receivers. ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) 10 PWM outputs to servos or ESC’s, or for camera  stabilisation Camera stabilisation: supports up to 3-axis camera mounts with stabilisation and manual control from any of configured receivers. Onboard USB connectivity for easy configuration. USB and serial telemetry and configuration Supported by powerful OpenPilot GCS 4 MB onboard memory 3C Quaternion based complementary filter running at 500Hz Simple Configuration Procedures Connect all ESCs to CC3D Board (Slot

sony psvita-wifi(no scratches,hardly used)with latest firmware update+ 8gb psvita card+ 5 games Orignal PSV Games worth RS )unit13 2)little big planet 3)unchartered 4)all stars 5)invizimals i will give package of psvita(rs)+8gb psv memcard(rs)+games(rs) only in rs

THE PREMIER FLASH CARD FOR 3DS! *SUPPORTS ALL 3DS ROMS TO DATE Multi-rom support In Menu OSD title selection exFat & Fat32 support NAND based rom support Game cart backup On board diagnostics EmuNand Clean Boot region free system Back up system Nand Works on 2DS, 3DS & 3DS XL (Firmware )

Features:  Support for AVRDude  Allows you to read or write the  microcontroller EEPROM,firmware, fuse  bits and lock bits   Support for Linux, Mac OS X and Windows  XP,7,8  5 KB/sec maximum write speed  Software controlled SCK option to support  targets with low clock speed ( 10 pin ISP interface Supported microcontrollers include:  Mega Series  ATmega8 ATmega48 ATmega88  ATmega168 ATmega328  ATmega103 ATmega128 ATmega  ATmega ATmega16  ATmega161 ATmega162 ATmega163  ATmega164 ATmega169  ATmega ATmega ATmega32  ATmega324 ATmega329  ATmega ATmega64 ATmega640  ATmega644 ATmega649  ATmega ATmega ATmega  Tiny Series  ATtiny12 ATtiny13 ATtiny15 ATtiny25  ATtiny26  ATtiny45 ATtiny85 ATtiny  Classic Series  AT90S AT90S AT90S  AT90S AT90S  AT90S AT90S AT90S  AT90S  CAN Series  AT90CAN128  PWM Series  AT90PWM2 AT90PWM3

Product Description:   Features:  Support for AVRDude  Allows you to read or write the  microcontroller EEPROM,firmware, fuse  bits and lock bits   Support for Linux, Mac OS X and Windows  XP,7,8  5 KB/sec maximum write speed  Software controlled SCK option to support  targets with low clock speed ( 10 pin ISP interface Supported microcontrollers include:  Mega Series  ATmega8 ATmega48 ATmega88  ATmega168 ATmega328  ATmega103 ATmega128 ATmega  ATmega ATmega16  ATmega161 ATmega162 ATmega163  ATmega164 ATmega169  ATmega ATmega ATmega32  ATmega324 ATmega329  ATmega ATmega64 ATmega640  ATmega644 ATmega649  ATmega ATmega ATmega  Tiny Series  ATtiny12 ATtiny13 ATtiny15 ATtiny25  ATtiny26  ATtiny45 ATtiny85 ATtiny  Classic Series  AT90S AT90S AT90S  AT90S AT90S  AT90S AT90S AT90S  AT90S  CAN Series  AT90CAN128  PWM Series  AT90PWM2 AT90PWM3   Contact: Contact us on Messaging for any Queries. We offer discounts for bulk orders on   Feedback: We provide good quality products & all products are QC checked before dispatch. We strive for 100% positive feedback for our orders. Providing Negative feedback will not solve anything feel free to write to us on messaging service. Feel Free to contact us on +91   Returns: Generally we do not accept any returns due to the nature of the product. Returns are decided on a case to case basis. Returns will not be accepted if misused, tampered or damaged.   Shipping: Shipping is done only through Powership. Logistics partners include – Bluedart DHL, Dotzot, Aramex, Fedex.  

Play any 3DS/DS roms with this flashcart on your 3ds! Supports system firmware only! Support latest emunand with a little trick. That can be explained to the buyer easily.

Play any 3DS/DS roms with this flashcart on your 3ds! Supports system firmware only! Support latest emunand with a little trick. That can be explained to the buyer easily. Above picture showing 3ds running latest 10.3 emunand. Also updated the price.This is my last offer, Can't do less than this![For people who requested] The DS flashcart can work with DS/Lite/DSi

 Play any 3DS/DS roms with this flashcart on your 3ds! Supports 4.1-4.5 system firmware only! Support latest emunand with a little trick. That can be explained to the buyer easily. Above picture showing 3ds running latest 10.3 emunand. Also updated the price. The DS flashcart can work with DS/Lite/DSi! HURRY BUY THIS FOR 1800/- BY USING COUPON DIWALI2015

BRAND NEW  AS LIMITED QUANTITY AVAILABLE. AND ITS NEW RELEASE PRICE IS LITTLE HIGH DUE TO HIGH CUSTOM DUTY IMPOSED. USE D.I.S.COUNT C.O.DES TO GET 8% OFF CALL US 9791116901 SHIPPING STARTS FROM SATURDAY Features: * Included all the EARLIER features; * Switch game back and forth by two orange buttons; * More easier to use,copy and play,no diskWriter required; * Compatible with other 3rd party homebrews; * AP checks solved; * Firmware updatable. SUPPOROT UPTO 10.3

BRAND NEW  AS LIMITED QUANTITY AVAILABLE. AND ITS NEW RELEASE PRICE IS LITTLE HIGH DUE TO CUSTOMS DUTY IMPOSED. USE D.I.SCOUNT C.ODES TO GET 8% OFF CALL US 9791116901 SHIPPING STARTS FROM SATURDAY Features: * Included all the EARLIER features; * Switch game back and forth by two orange buttons; * More easier to use,copy and play,no diskWriter required; * Compatible with other 3rd party homebrews; * AP checks solved; * Firmware updatable. SUPPOROT UPTO 10.3