Fpv kit 200mw v

before buying please call me for better service 5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

Features: Low harmonic radiation Eight channel launching 5.8G 200mW transmitter smarter but stronger power hence more reliable This transmitter is just light compact and powerful a very good choice for 5.8G middle range FPV Can be used together with 2.4GHz Spektrum Futaba JR and other R C radios! Onboard quiet switching regulator supply 12V camera Specifications: Power supply voltage: V Supply current: 200mA Operating temperature: - Celsius High power output: 23dBm 200mW Size: approx. 2.1x 1x 0.7inch 55 x 26 x 17mm Weight: approx. 1.1oz 30g Transmitting frequency: MHz 8CH Transmitting distance: M Package Contents: 1x Transmitter 1x 5.8G Antenna 1x Connector and cable set

Bracket used to mount a camera and rotate it 180deg and tilt around 150Deg. Refer to this video for demo and building instructions https://www.youtube.com/watch?v=2LltXMHVuDs Servo motors are not included Best quality and superb finishing, with screws required for assembly Within 24hr shipping on weekdays and next business day shipping on holidays and weekends. Shipping is done via DTDC, Bluedart or Indiapost(for rural and remote locations only where the other services are not available) This pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up & downwards around 150°.  It also comes fully option to directly attach two  Micro Servos  (SG-90 or SG-92 type) and a 38mm x 36mm space to mount a camera or sensor or whatever you like. Since common micro sized servos directly attach to the mount, you can use any microcontroller or driver to control the pan/tilt mount. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion. It is perfect for controlling through an Arduino or any micro controller. Perfect for general electronics and robotics projects.  *We ship maximum within 24hrs after receiving payment through DTDC courier and Speed post for remote locations * We ensure safe packing of the item so that it can reach safely to the buyer. For any queries regarding the product, transaction, delivery, bulk ordering, combo ordering or anything else please send a P.M or a mail to Will reply A.S.A.P. Thank you.