Fpv kit

before buying please call me for better service 5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

Description   The New HobbyKing Thorax is a face full of attitude, this little mini hex is the best of both worlds using common sized batteries and FPV gear, but with all the agility and fun of a 250 class racer. The Thorax is a 310mm FPV machine with built

Bracket used to mount a camera and rotate it 180deg and tilt around 150Deg. Refer to this video for demo and building instructions https://www.youtube.com/watch?v=2LltXMHVuDs Servo motors are not included Best quality and superb finishing, with screws required for assembly Within 24hr shipping on weekdays and next business day shipping on holidays and weekends. Shipping is done via DTDC, Bluedart or Indiapost(for rural and remote locations only where the other services are not available) This pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up & downwards around 150°.  It also comes fully option to directly attach two  Micro Servos  (SG-90 or SG-92 type) and a 38mm x 36mm space to mount a camera or sensor or whatever you like. Since common micro sized servos directly attach to the mount, you can use any microcontroller or driver to control the pan/tilt mount. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion. It is perfect for controlling through an Arduino or any micro controller. Perfect for general electronics and robotics projects.  *We ship maximum within 24hrs after receiving payment through DTDC courier and Speed post for remote locations * We ensure safe packing of the item so that it can reach safely to the buyer. For any queries regarding the product, transaction, delivery, bulk ordering, combo ordering or anything else please send a P.M or a mail to Will reply A.S.A.P. Thank you.

The S500 is a professional and practical multi-rotor air frame kit for upgrade quadcopter, and can well work with Gopro Hero 3 2 Axis brushless gimbal or 808 gimbal for FPV (the total weight of gimbal and camera less than 400g will be suitable). It comes with a large mounting board at the front and rear for mounting cameras or other accessories. No extra mounting brackets are needed. Colored arms for orientation to keep you flying