I2c twi spi

IIC/I2C/TWI/SPI Serial Interface Board Module Port For Arduino LCD Display IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, you may not be able to use normal LCD shield after connecting a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display with only 2 wires. Features: Specifications: Supply voltage: 5V Backlight & Contrast can be adjusted by inbuilt potentiometer. Comes with 2 IIC interface, which can be connected by Dupont wires or IIC dedicated cable Compatible for LCD (16x2) Using this I2C interface module, you can realize data display with only 2 wires. Backlight can be switched using onboard jumper. Size: mm(max) Please contact us for any doubt.Please give us positive feed back.Your feed back is very important for us. Happy to help you.We shipped our material within 2 working days after getting confirmation of payment. contact us- Mob:-     (From 10 AM to 9 PM)    Powered by Turbo Lister

IIC/I2C/TWI Serial Interface Board Module Port For Arduino LCD Display IIC/I2C/TWI Serial Interface Board Module Port For Arduino LCD Display Features Supply voltage: 5V the backlight and contrast is adjusted by potentiometer Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable Compatible for LCD This is another great IIC/I2C/TWI/SPI Serial Interface With this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices

IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, you may not be able to use normal LCD shield after connecting a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display with only 2 wires. Features: Specifications: Supply voltage: 5V Backlight & Contrast can be adjusted by inbuilt potentiometer. Comes with 2 IIC interface, which can be connected by Dupont wires or IIC dedicated cable Compatible for LCD (16x2) Using this I2C interface module, you can realize data display with only 2 wires. Backlight can be switched using onboard jumper. Size: mm(max)

IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, you may not be able to use normal LCD shield after connecting a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display with only 2 wires. Features: Specifications: Supply voltage: 5V Backlight & Contrast can be adjusted by inbuilt potentiometer. Comes with 2 IIC interface, which can be connected by Dupont wires or IIC dedicated cable Compatible for LCD (16x2) Using this I2C interface module, you can realize data display with only 2 wires. Backlight can be switched using onboard jumper. Size: mm(max) = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, you may not be able to use normal LCD shield after connecting a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display with only 2 wires. Features: Specifications: Supply voltage: 5V Backlight & Contrast can be adjusted by inbuilt potentiometer. Comes with 2 IIC interface, which can be connected by Dupont wires or IIC dedicated cable Compatible for LCD (16x2) Using this I2C interface module, you can realize data display with only 2 wires. Backlight can be switched using onboard jumper. Size: mm(max) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

OLED 0.96" I2C IIC SPI Serial 128X64 WHITE Display LCD LED Module for Arduino What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306     Note: This item come I2C/IIC interface only. Because the hardware reasons, resulting IIC/I2C bus no ACK response signal, so IIC IIC communication Whitby automated production of OLED modules instead of the standard version. But this can be solved by software...... published here for the Arduino library file, you can make this OLED module used in the Arduino system. Download File description:- IIC_without_ACK.cpp - SSD1306 drivers; IIC_without_ACK.h - SSD1306 driver file header; oledfont.c - matrix table (you need to display the contents of the matrix can be calculated by taking the modulus of software after adding this file, modulo the way " common cathode - out line - Reverse Output"; font will take up a lot of space FLASH, please comment out the unwanted font, so there will be enough space Arduino tips). Function:- Write_IIC_Byte (unsigned char IIC_Byte); / / by IIC write an 8-bit data (such as 0xff) Write_IIC_Command (unsigned char IIC_Command); / / write command to the OLED module through IIC bus Begin_IIC_Data (); / / write data through the IIC bus open ready (which would allow a group of data transmission is complete and then turn off IIC, can greatly speed) IIC_SetPos (unsigned char x, unsigned char y); / / Set the starting point coordinates (x range 0 ~ 128, y ranges from 0 to 7) Fill_Screen (unsigned char fill_Data); / / Fill_Screen (0xff) - Full screen lit; Fill_Screen (0 × 00) - Full screen off (can be used to clear the screen) Char_F6x8 (unsigned char x, unsigned char y, const char ch []); / / display the ASCII character 6 × 8 Char_F8x16 (unsigned char x, unsigned char y, const char ch []);/ / display the ASCII character 8 × 16 CN_F16x16 (unsigned char x, unsigned char y, unsigned char N); / / display of 16 × 16 characters (this can be considered for the first time on the Arduino platform to achieve the display of Chinese characters) Draw_BMP (unsigned char x0, unsigned char y0, unsigned char x1, unsigned char y1, const char BMP []); / / display BMP images of 128 × 64 The other functions is functional function. Usage: Please "IIC_without_ACK" folder to x: / arduino-1.5.5 / libraries directory, restart the Arduino IDE; Demo_IIC is based on the Arduino UNO sample program...... correct wiring and run.   Package Included: 1PCS * New  white 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

See our ratings Add this shop to my favorites IIC/I2C/TWI/SP​​I Serial Interface 16x2 Blue LCD Display Module ₹ Availability:

Description This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources for Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices

OLED 0.96" yellow blue Display Module For Arduino I2C Display 128X64 OLED What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306       Package Included: 1PCS * New  yellow-blue 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Microchip MCP23S17 / MCP Port Expander. Mention IC Version (SPI or I2C)  in order details for correct chip shipping. Total Item available  MCP23S17 - 8 PCS  MCP PCS Shipping Charge free on purchase of all items

3.3V-5V 0.96" LCD Modules SPI 128X64 SSD OLED LCD Display Module Arduino CLK MOSI STM32/AVR/51 Mmm Features: What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Specifications: No backlight, the display unit can be self-luminous LED colour: yellow and blue High resolution: Viewing angle:> 160 Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc. Ultra-low power consumption: full screen lit 0.08W, 0.06W normal full-screen display of Chinese characters Wide voltage support: without any modification, directly supports 3V ~ 5V DC Working temperature: -30 C ~ 70 C Minimum occupancy on Earth IO port display: The SPI communication, as long as the two IO ports will be able to drive! Driver IC: SSD No font: take the word with modulo software Size Reference Module volume (generous): 27.0MM * 27.0MM * 4.1MM Please Note: Due to hand measure, the size may have 1-4 cm error Due to Different Monitor, the color may have difference Package Included: 1x LCD Modules 3.3V-5V 0.96" LCD Modules SPI 128X64 SSD OLED LCD Display Module Arduino CLK MOSI STM32/AVR/51 Mmm 100% perfectly working, will be properly checked before shipment. For new users: ------------------- if you are new users we created a git hub with required library, please visit it, read the read me file and follow the instructions, then you will be able to setup OLED

Features: l           Support for the IDE 1.0+ (OSX/Win/Linux) l           Power via USB or External Source l           On-board 500ma 5V Regulator l           Built-in USB(and serial debugging) l           6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB) l           8k Flash Memory (about 6K after bootloader) l           I2C and SPI(vis USI) l           PWM on 3 pins (more possible with Software PWM l           ADC on 4 pins l           Power LED and Test/ Status LED (on Pin0) 　 Package includes: l        1x Digispark Miniature USB Development Board l        1x 3-Pin connector l        1x 6-Pin connector Note: As the package is very big and the shipping fee would be very high, we will ship the item out without its original box. Anyhow, the shipping is very safe. Also available                                 Digispark Kickstarter USB Development Board for Arduino Tiny 85 (USB Male A Interface) Important  Note:  Please check your shipping address during checkout. powership policies do not allow change of address after payment. You have order the item again to change the shipping address. Now Fast shipping with  powerShip  through  Blue Dart / DTDC / Aramex / FedEx. 

Features: l           Support for the IDE 1.0+ (OSX/Win/Linux) l           Power via USB or External Source l           On-board 500ma 5V Regulator l           Built-in USB(and serial debugging) l           6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB) l           8k Flash Memory (about 6K after bootloader) l           I2C and SPI(vis USI) l           PWM on 3 pins (more possible with Software PWM l           ADC on 4 pins l           Power LED and Test/ Status LED (on Pin0) 　 Package includes: l        1x Digispark Miniature USB Development Board l        1x 3-Pin connector l        1x 6-Pin connector Note: As the package is very big and the shipping fee would be very high, we will ship the item out without its original box. Anyhow, the shipping is very safe. Also available                                 Digispark Kickstarter USB Development Board for Arduino Tiny 85 (micro-USB Female Interface) Important  Note:  Please check your shipping address during checkout. powership policies do not allow change of address after payment. You have order the item again to change the shipping address. Now Fast shipping with  powerShip  through  Blue Dart / DTDC / Aramex / FedEx. 

Description The ADXL345 is a low-power, 3-axis MEMS accelerometer modules with both I2C and SPI interfaces. The Adafruit Breakout boards for these modules feature on-board 3.3v voltage regulation and level shifting which makes them simple to interface with 5v microcontrollers such as the Arduino. VDC Supply Voltage Ultra Low Power: 40uA

Description: 100% brand new and high quality The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much. The Digispark is shipped fully assembled except for the two included and easy to solder headers. Here are the specs: Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection)On-board 500ma 5V Regulator Built-in USB6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI)PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED Size:2x1.7cm(approx) Package Included: 1 x Digispark Kickstarter Attiny85 USB Development Board for Arduino Full Wiki link:  digispark Wiki         Software: NOTE:  If you used a version of the ide where the digistump add-ons were installed separately you must delete the digistump folder at My Documents/Arduino/hardware (windows) or Documents/Arduino/hardware (OS  X) or /home/[username]/Sketchbook (Linux) or this new IDE install will not work properly and you will get library errors! The Digispark uses the Arduino IDE - Digistump Release 1.5.x which is the Arduino IDE with some custom additions and supports Digispark, Digispark Pro, and DigiX. These are presented as a fully integrated package with 1.5.x that can be downloaded as an installed or zip file. First download the appropriate package: Windows (now with fully signed drivers!) Installer (recommended): https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpArduinoInstall1.5.8C.exe Zip:  https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpIDE1.5.8C.zip Mac:  https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpIDE1.5.8COSX.zip Linux: 32-bit:  https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpIDE1.5.8C-linux32.tar.gz 64-bit:  https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8C/DigistumpIDE1.5.8C-linux64.tar.gz Note: report any issues with the builds to the forum:  http://digistump.com/board Compiling from source:  https://github.com/digistump/DigistumpArduino Windows Install Complete these steps before plugging