Microchip spi

MICROCHIP  PIC24HJ128GP202-I/SO  MICROCONTROLLER MCU, 16 BIT Product Information: Controller Family/Series: PIC24HJ Embedded Interface Type:   I2C, SPI, UART MCU Case Style:             SOIC No. of I/O's:              2 1 No. of Pins:                28 Program Flash Memory:      128KB R AM Memory Size:          8 KB Timers:                   Five 16 bit        UART:                     2         SPI:                       2          External Interrupts:      3          RTCC:                     1          I2C:                      1          CRC Generator:            1         ADC (Channels):           10          Remappable Peripheral For more detail visit microchip website. Shipping: - Shipping is all over India. Please Provide Complete Address and phone number. - We usually ship within same business day except Sunday or public holiday's. In case of any claim or complaints please contact us before leaving any negative feedback. And we will try our best to resolve your issue For Any Queries Please Call us on: + or you can e-mail us at

Microchip MCP23S17 / MCP Port Expander. Mention IC Version (SPI or I2C)  in order details for correct chip shipping. Total Item available  MCP23S17 - 8 PCS  MCP PCS Shipping Charge free on purchase of all items

PIC18F452-I/P    40    PDIP We Can Arrange Any Microchip Microcontroller or any other IC On Request. Features 2 PWM 10-Bit 40 MHz Max. Speed Self-Programming PSP ICD  Parameter Name  Value Program Memory Type Flash Program Memory (KB) 32 CPU Speed (MIPS) 10 RAM Bytes Data EEPROM (bytes) 256 Digital Communication Peripherals 1-UART, 1-A/E/USART, 1-SPI, 1-I2C1-MSSP(SPI/I2C) Capture/Compare/PWM Peripherals 2 CCP Timers 1 x 8-bit, 3 x 16-bit ADC 8 ch, 10-bit Temperature Range (C) -40 to 125 Operating Voltage Range (V) 2 to 5.5 Pin Count 40

PIC18F45K50-I/P    40    PDIP We Can Arrange Any Microchip Microcontroller or any other IC On Request. Features High performance PIC18 core with 8x8 Hardware Multiply Flash Program Memory with self read/write capability 256 Bytes of integrated EEPROM Internal 48MHz Oscillator with USB Accuracy -Via Active Clock Tuning from USB Host Universal Serial Bus 2.0 Module Enhanced Capture Compare PWM (ECCP) Module with up to 4 outputs Integrated Temperature Indicator Module Up to 25 Channel 10-bit ADC with Voltage Reference 2 Analog Comparators 5-bit Digital to Analog Converter (DAC) MI2C / SPI Module (MSSP) Enhanced Addressable USART Module Charge Time Measurement Unit (CTMU) for measurement applications 25mA Source/Sink current I/O 2x 8-bit Timers 2x 16-bit Timers Extended Watchdog Timer (WDT) Enhanced Power-On/Off-Reset Low-Power Brown-Out Reset (LPBOR) Programmable Brown-Out Reset (BOR) In Circuit Serial Programming and Debug (ICSP/ICD)

DSPIC33EP128GM604 microchip MCU controller brand new warranty 16K RAM & 128K mem + TQFP to DIP Adapter PCB Board Specs Package - 1 MCU + 1 Adapter This is a Double-Side PCB Circuit Board.  A side for pin pitch size 0.8mm,It can be used for most of the TQFP (compatible with 32pin~64pin) to 2.54mm DIP. B side for pin pitch size 0.5mm,It can be used for most of the TQFP (compatible with 32pin~100pin) to 2.54mm DIP. Features Operating Conditions 3.0V to 3.6V, -40°C to +85°C, up to 70 MIPS 3.0V to 3.6V, -40°C to +125°C, up to 60 MIPS  Core: 16-Bit dsPIC33E CPU Code-Efficient (C and Assembly) Architecture Two 40-Bit Wide Accumulators Single-Cycle (MAC/MPY) with Dual Data Fetch Single-Cycle Mixed-Sign MUL plus Hardware Divide 32-Bit Multiply Support  High-Speed PWM Up to 12 PWM Outputs (six generators) Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources Dead Time for Rising and Falling Edges 7.14 ns PWM Resolution PWM Support for:  DC/DC, AC/DC, Inverters, PFC, Lighting BLDC, PMSM, ACIM, SRM Programmable Fault Inputs Flexible Trigger Configurations for ADC Conversions Supports PWM Lock, PWM Output Chopping and Dynamic Phase Shifting  Advanced Analog Features Two Independent ADC modules: Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H or 49 analog inputs Flexible and Independent ADC Trigger Sources Up to Four Op Amp/Comparators with Direct Connection to the ADC module: Additional dedicated comparator Programmable references with 32 voltage points Programmable blanking and filtering Charge Time Measurement Unit (CTMU): Supports mTouch™ capacitive touch sensing Provides high-resolution time measurement (1 ns) On-chip temperature measurement  Timers/Output Compare/Input Capture 21 General Purpose Timers: Nine 16-bit and up to four 32-bit timers/counters Eight output capture modules configurable as timers/counters PTG module with two configurable timers/counters Two 32-bit Quadrature Encoder Interface (QEI) modules configurable as a timer/counter Eight Input Capture modules Peripheral Pin Select (PPS) to allow Function Remap Peripheral Trigger Generator (PTG) for Scheduling Complex Sequences  Communication Interfaces Four Enhanced Addressable UART modules (17.5 Mbps): With support for LIN/J protocols and IrDA® Three 3-Wire/4-Wire SPI modules (15 Mbps) 25 Mbps Data Rate for Dedicated SPI module (with no PPS) Two I2C™ modules (up to 1 Mbps) with SMBus Support Two CAN modules (1 Mbps) CAN 2.0B Support Programmable Cyclic Redundancy Check (CRC) Codec Interface module (DCI) with I2S Support  Direct Memory Access (DMA) 4-Channel DMA with User-Selectable Priority Arbitration Peripherals Supported by the DMA Controller include: UART, SPI, ADC, CAN and input capture Output compare and timers

18F Microchip IC Microchip doesn't sit still - they're always improving their product, and the 18F is a more powerful upgrade to the 16F877a.       PIC18F Voltage Range 2-5.5VDC Program Memory 32 kB RAM (Bytes) EEPROM Data (Bytes) 256 Max Speed (MHz) 40 I/O 36 Package 40-pin Wide-DIP* A/D Channels Bit) PWM Channels 2 Timers 1-8-bit; 3 16-bit Serial I/O 1 -A/E/USART, 1 -MSSP(SPI/I2C)

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 40- or 44-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F877A features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more advanced level A/D applications

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, 5 Pcs Set - New Original Microchip PIC16F877A Microcontroller for Electronics Projects Most Widely Used Microcontroller Amongst Hobbyist ****Free 5 Pcs -40 Pin IC Base**** Easy to Program Via Pickit2 /Pickit3 Features 40-pin Low Power Microcontroller Flash Program Memory: bytes EEPROM Data Memory: 256 bytes SRAM Data Memory: 368 bytes I/O Pins: 33 Timers: Two 8-bit / One 16-bit A/D Converter: 10-bit Eight Channel PWM: Two 10-bit Modules SSP: SPI and I²C Support USART: Yes External Oscillator: up to 20MHz Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, New Original Microchip PIC18F Microcontroller with Universal Serial Bus (USB) Feature for Electronics Projects Most Widely Used USB Featured Microcontroller Amongst Hobbyist  Easy to Program Via Pickit2 /Pickit3 Universal Serial Bus Features: • USB V2.0 Compliant • Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s) • Supports Control, Interrupt, Isochronous and Bulk Transfers • Supports up to 32 Endpoints (16 bidirectional) • 1-Kbyte Dual Access RAM for USB • On-Chip USB Transceiver with On-Chip Voltage Regulator • Interface for Off-Chip USB Transceiver Peripheral Highlights: • High-Current Sink/Source: 25 mA/25 mA • Three External Interrupts • Four Timer modules (Timer0 to Timer3) • Up to 2 Capture/Compare/PWM (CCP) modules: - Capture is 16-bit, max. resolution 5.2 ns (TCY/16) - Compare is 16-bit, max. resolution 83.3 ns (TCY) - PWM output: PWM resolution is 1 to 10-bit • Enhanced Capture/Compare/PWM (ECCP) module: - Multiple output modes - Selectable polarity - Programmable dead time - Auto-shutdown and auto-restart • Enhanced USART module: - LIN bus support • Master Synchronous Serial Port (MSSP) module supporting 3-wire SPI (all 4 modes) and I2C™ Master and Slave modes • 10-bit, up to 13-channel Analog-to-Digital Converter module (A/D) with Programmable Acquisition Time • Dual Analog Comparators with Input Multiplexing Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

Description: This module contains what you need to enable ethernet on your next microcontroller project. This board utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20 MHz. It includes a ENC28J60 ethernet controller, an RJ45 socket with link/activity lights and integrated transformer. This ethernet module enables you to connect a particular Embedded device (equipped with SPI support) on to a network. By using this Ethernet module (along with a microcontroller running a small TCP/IP stack) applications like Embedded Web server can be easily developed. Use this module to enable Ethernet interface for your product. It works with any microcontroller operating at 3.3V or 5V. This module works at 5V and is compatible with 5V interface lines. Use SPI process to interface with it. Host web server, ping the module or add it to home automation via internet. Heart of this module is ENC28J60 Ethernet controller from Microchip. Use of RJ45 with Integrated transformer has made it possible to reduce the size of board. This board is assembled with all components as shown in the pictures below. The circuit board includes all required components for the ethernet controller, plus a 3.3V Voltage Regulator and a RJ-45 jack with integrated transformer and built-in Link and Activity LEDs for connection to an Ethernet Local Area Network. Features: Microchip ENC28J60 Ethernet Chip supporting Microchip s TCP/IP protocol stack, with IPv4, UDP, TCP, DHCP, ICMP, FTP, and HTTP support. Compatible with all controllers having an SPI interface, SPI interface takes only few pins to add Ethernet interface to your microcontroller project Suitable for 3.3V Interface LAN connector with build in transformer Link and Activity LED's on Ethernet connector 8 pin standard interface connector with spacing of mm) row pins IEEE Compatible with Integrated MAC and 10Base-T PHY Fully Compatible with Base-T Networks Supports One 10Base-T Port with Automatic Polarity Detection and Correction Supports Full and Half-Duplex modes Programmable Automatic Retransmit on Collision Programmable Padding and CRC Generation Programmable SPI Interface with Clock Speeds Up to 20 MHz Application: Remote control and monitoring. Data capture and logging Industrial Automation Building Automation Appliance remote management Robotics Microcontroller Research and Development TCP/IP Research and Development Specification: Operating Voltage: +3.3V DC Current Consumption: 180mA average Pin Spacing: mm) Board Size: 68x22mm We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

The PIC DEVELOPMENT board demonstrates the capabilities of Microchip’s 8-bit microcontrollers, specifically, 18-, 28- and 40-pin PIC16FXXX, PIC16F1XXX, and PIC18 devices.  It can be used as a standalone demonstration board with a programmed part. Alternatively, it can be used with an in-circuit emulator (for example, MPLAB® Real ICETM) or with an in-circuit programmer/debugger (such as MPLAB® ICD 3 or PICkitTM 3). Microchip offers a bundle of the PICDEM 2 PLUS and the MPLAB® ICD 3, called the MPLAB® ICD 3 Evaluation Kit (with PICDEM 2 Plus), product number DV164036. Sample programs are provided to demonstrate the unique features of the supported devices.       Key Components  LCD display Interface 40 pin socket 4x LEDs four 7 segment display  RS232 interface to PC 12 V adapter connector GPIO Pin connector 4 * 4 switch matrix On-board external oscillators Four push button switches for external stimulus and reset Variable voltage input for ADC simulation Connectivity options Programmer/debugger connectivity using MPLAB ICD 3, MPLAB Real ICE and PICkit 3 PICkitTM Serial Connector for analysis of serial communications peripherals such as SPI or I2C Active RS 232 port Expansion