Ic wireless control kit

M4 Lock Receiver with 4 Keys Wireless Remote Control, Four Ways Wireless Remote Control Kit Four Ways Wireless Remote Control Kit,M4 the lock Receiver with 4 Keys Wireless Remote Control Specification: Operating voltage (V): DC5V Quiescent Current (mA): 4.5MA Modulation: AM (OOK) Operating Temperature: -10 ° C to +70 ° C Receiver sensitivity (dBm):-105DB Operating frequency (MHz): MHz (MHZ frequency segment can be optional) Encoding: the pad code (fixed code) Dimensions (LWH): mm   Working: M4 (Jog: Press and hold let go on the output, let go to stop the output), L4 (interlock: four at the same time there can be only one output), T4 (self-locking: four independent outputs are not mutuallythe impact of click output and then click stop output)   Product Features: The super-regenerative receiver module using the LC oscillator circuit containing amplifier shaping, the output data signal is decoded high signal, extremely easy to use and inexpensive, so widely used. With four decoder output (can be changed to six-way jog or interlock output), easy to use; frequency debugging easy, short lead times; consistency of product quality, cost-effective. Receiver module has a wide receiver bandwidth, typically ± 10MHz, factory general tone

Description Package Includes: 1 Piece new  IC Wireless 4 -Channel RF Remote control Transmitter & Receiver Kits It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Remote control 1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4.Modulation mode: ASK (Amplitude Modulation) 5.Transmitting frequency: 315MHZ (SAW frequency stabilization) 6.Transmission distance:M (Open field the receiver sensitivity -100dbm) 7.Encoder types: fixed code 8. The frequency of this product is 315 mhz. With decoding receiver board 1.The operating voltage DC5V, receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 2.Size: mm There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Module function description: This module contains no self-locking function, simple implementation, wireless remote control by pressing a key, the receiver output a high level, the corresponding output when key releases. High level at the receiving end disappear, and each channel are independent of each other, each other. The output of high level can directly drive the relay, as shown

The IREXT2 Wireless IR Extender Kit lets you extend an Infrared signal from a remote control by up to 330ft (100m). Using a radio frequency that can operate through walls, doors, and around corners, the remote control extender lets you control your A/V devices, set top boxes, tatasky etc.from greater distances or even from another room. This adds configuration versatility for multi-room or outdoor applications, without having to move within range of your remote controlled device. The remote control extender is comprised of two units - one local IR remote extender, which accepts the incoming IR signal from the remote control and wirelessly transmits it to the second IR remote control Max Distance 100 m / 330 ft Frequency Range IR: kHz Frequency MHz +/-1 MHz Physical Characteristics Product Length 3.7 in [95 mm] Product Width 2.6 in [67 mm] Product Height 1.4 in [35.3 mm] Product Weight 2.3 oz [65 g] Power Power Source 2 AC Adapters Included Input Voltage AC Input Current 0.2A Output Voltage 12 DC Output Current 0.2A Environmental Operating Temperature 0°C to 43°C (32°F to 109°F) Storage Temperature -20°C to 60°C (-4°F to 140°F) Packaging Information Shipping (Package) Weight 1.1 lb [0.5 kg] What's in the Box Included in Package 1 - IREXT transmitter 1 - IREXT receiver 1 - IR extender probe 2 - Power Adapter 1 - Instruction Manual

Wireless 4 Channel Robot Control Kit With Dual DC Motor Drive 433Mhz RF  Best Quality @ Lowest Price Control your robot from remote using this 4 channel wireless remote control kit. Kit comes with one 4 channel wireless transmitter with push buttons on-board for sending commands to receiver unit to control the robot. Receiver unit comes with on-board L293D bidirectional dual DC motor driver. Simply Connect 9V battery to Transmitter and proper power source to receiver, connect two DC motors on receiver module and you are ready to control your two or four wheel drive robot within few minutes. You can easily control your robot reverse, forward, left & right. Description Transmitter Input Supply: 9V Battery Receiver Power Supply: 9 - 15 V DC through Battery OR Power Adapter DC Motor Output Channel: 2  Output Current Per Channel: 600 mA (Can Easily drive BO Motors OR Plastic Gear Robotic Motors) Address Selection: 8 BIT On-board DIP Switch RF Frequency: 433Mhz USE: Indoor & Outdoor Applications  Robot Controller, Wireless Remote Controller, Wireless Switching, Wireless Dual DC Motor Drive, DIY Robotic Kits:Package Includes: 1 X 4 Channel Wireless Transmitter 1 X 4 Channel Wireless Receiver With On-board Dual DC Motor Driver 1 X 9V Battery Clip (9V Battery Is not Included) For any  queries  please feel free to write us using "Ask Seller a Question" link  OR  Call us on 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller,

LMTF AMP board KIT+Rectifier filter power KIT + Tone control Kit Introduction:   LM is a single channel high-performance Stereo power amplifier IC produced by National Semiconductor Corporation(NS).The maximum continuous output power is up to 60W.From the Introduction till now,it's widely loved by vast audio fans     This power amplifier adopts power board & amplifier board Independent design,for the amplifier part,each channel shares one circuit board,every set includes one power board & 2 single channel power amplifier boards.  All the components on the board are carefully selected,uF/63V capacitors as filter capacitors,35A large current rectifieer bridge,can ensure the powerboard long-term full load working.Other capacitors choose Epcos, Keltron, etc. famous brand capacitors.1% copper pin film resistors. The PCB board adopts single side circuit board, Black boars,reasonable layout design,looks beautiful & generous. In Package  2 X LM mono boards 1 X Hi Fi Tone control board 1 X uf 63v power supply board 1 X 15v regulated power supply board 

Feature: ·         Wireless control, easy to install ·         Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC220V,AC85V-260V OR DC12V.. ·         You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. ·         One/several transmitters can control one/several receivers simultaneously. ·         If you use two or more receivers

ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT T his Wireless robot is control by ANDROID APP with the help of BLUETOOTH Wireless Protocol. This ANDROID APP also Supports VOICE COMMANDS to drive the robot too. PACKAGE INCLUDES: 1) A ASSEMBLED ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT 2) Pre- Built ANDROID APP By Robosoft Labs to drive the robot. (APP source code/program won't be provided due to copyright issue) ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT IS ASSEMBLED OF FOLLOWING LISTED ITEMS: 1) TWO L TYPE BO DC MOTOR (+5V TO +12V) 2) 2 CLAMPS 3) 1 CASTOR WHEEL 4) TWO WHEELS 5) L293D BOARD (MOTOR DRIVER BOARD) 6) CHASSIS 7) BLUETOOTH RECEIVER MODULE 8) 1 AVRDUINO/ARDUINO COMPATIBLE BOARD WITH AVR'S ATMEGA 8 IC 9) CONNECTING BURG WIRES 10) TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE THE ROBOT FROM SCRATCH PARTS TO A ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT. 11) PRE BUILT AND BURNT ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT PROGRAM IN AVRDUINO ATMEGA 8 IC 12) NUT AND BOLTS. Points to be noted: 1) This ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT is ASSEMBLED BY PRE-FABRICATED PARTS. 2)  ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT CHASSIS is made of PLY WOOD 3) PROGRAM CODE or HEX FILE WONT BE PROVIDED due to COPYRIGHT ISSUE. 4) Power Supply for Robot: Please use Only +9V battery supply (Batteries not Included as it can't be shipped) 5) Color of Components used may vary according to availability. 6) Mobile phone shown is not included

Call for discounts up to 6% (i.e. Rs /-).....{ On Payment through select bank                                                                                  Credit and Debit Cards } With Bass, Treble and Volume Control This a True 500w RMS Audio Amplifier, Needs a Transformer, 6.5 Amp. Also works on amp transformer if toroidal. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Also the product assembling takes approx one week. Product Description 8 Transistor Stereo Amplifier, High Power 500w RMS output. The best part about the kit is that it is made of individual components and not IC's, which means if any thing goes wrong it can be easily serviced and components can be replaced instead of trying to find a Specific IC. Also all the powersupply components are built in, Simply need to add a Transformer and it will work. You can also add external volume and bass controller if you need to. Please make sure to add a extra Fuse

Product Description Features: Ultra-thin ultra-small (mm) Good harmonics too easy to FCC / CE certification The penetration ability (measured through 8 floors) Using the latest version of the U.S. SI IC, stable performance Specification: Frequency range: M Sensitivity up to-121dBm Maximum output power: 20dBm Ddata transfer rate:kbps FSK, GFSK and OOK modulation power supply: V Ultra-low-consumption shutdown mode Digital received signal strength indication (RSSI) Wake time Automatic matching and two-way antenna switch control Configurable packet structure Preamble detection 64-byte send and receive data register (FIFO) Low power detection 8-bit ADC and temperature sensor Operating temperature range: - ° C Integrated voltage regulator Frequency hopping Power-on reset function Built-in lens adjustment Application: Remote Control; Remote meter reading; Home security alarm and remote keyless entry; Industrial Control; Telemetry Home Automation; Personal data records; Toy Control; Sensor networks; Tire pressure monitoring; Health Monitoring; Wireless PC peripherals; Tag readers Powered by Turbo Lister

Only 1 Piece Left ! Hurry Up Remotely lock and unlock your car Direction light flashing Have LED indicator Central door lock automatically Remote car location Remote trunk release Universal for any cars If your car doesn't have Central Locking, then you need also actuator kit which installs on your car doors to open and close the lock. This kit only converts your central locking to remote control wireless lock unlock car doors. Central Locking (means you unlock or lock your all car doors with your main driver side car door lock) Specification: Control box size: 8.5 x 6 x 2.5cm (L x W x H) 2 Remote Controllers size: 5.5 x 2.8 x 1cm (L x W x H) Distance: About meters Working Voltage: 12V Working Current: 12MA Working Frequency: 315MHz Control box color: Black   Package include: 1 x Control box 2 x Remote Controllers 1 x LED connection wire 1 x Wire 1 x Adhesive tape 1 x Operation instruction Attention: The installation had better to be operated by the technician

Cisco WAP321 Wireless-N Selectable Band Access Point The Cisco WAP321 is a PoE wireless-N access point designed for small offices. It will handle up to 20 simultaneous clients (32 total) and lets you select whether you want to transmit at 2.4GhZ or 5Ghz, The Cisco WAP321 supports Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. Cisco WAP321 Overview The Cisco WAP321 is a sleek, high-performance, selectable Wireless-N access point that delivers fast, reliable wireless connectivity and allows small businesses to easily expand their wired networks. This device combines ease of use with business-class features such as a Gigabit Ethernet LAN port, support for IPv6, Power over Ethernet for simpler deployment, quality of service to prioritize network traffic, and comprehensive security to deliver the reliability and performance needed for small business networks. The elegant design has flexible mounting options that allow it to seamlessly blend into any small business environment. It can be managed with an intuitive browser-based GUI and is backed by a limited lifetime warranty. Built specifically for small businesses, the Cisco WAP321 offers selectable-band 802.11n wireless technology to deliver high throughput and extended range throughout your office. Advanced quality-of-service (QoS) features let you prioritize traffic to support bandwidth-sensitive applications. This sophisticated control enables you to take advantage of voice over WLAN (VoWLAN) to place or receive calls over the wireless LAN infrastructure. Cisco WAP321 Features: ● Highly secure, high-speed 802.11n wireless networking delivers enhanced throughput and extended range for bandwidth-intensive applications. ● Wizard-based setup and configuration enables fast, simple deployment. ● Gigabit Ethernet LAN interface provides high-speed connectivity for faster downloads and demanding applications. ● Selectable-band wireless access lets you switch bands to minimize interference from other office devices and improve performance. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information. ● Power over Ethernet (PoE) support enables easy installation without the expense of additional wiring. ● Client bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Elegant, compact design with internal antennas and versatile mounting kit enables installation on a ceiling, wall, or desktop. ● Intelligent quality of service (QoS) prioritizes network traffic to keep critical network applications running at top performance. ● Power-saving sleep mode and port control features help maximize energy efficiency. ● Highly secure guest access enables safe wireless connectivity for visitors. ● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades. Contact US : +91-9717317430/9911567618 Write us : sales@fidemonline.com URL : http://www.fidemonline.com

This a True 60w RMS Audio Amplifier, Needs a 12-0 Transformer, 5 Amp on AC. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. COMES WITH BASS, TREBLE, VOLUME AND BALANCE FUNCTIONS. Product Description High Power 60w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. This Board Comes with Base, Treble and Volume Control's. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. 12-0 means 12v. Now 12v 6Amp is 60w RMS. So you can be sure that the device that you buy will give you more than 55w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 60w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

Cisco WAP121 Wireless Access Point The Cisco WAP121 is a wireless-N PoE access point with internal antenna for flexible deployment options. The Cisco WAP121 supports both Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. Cisco WAP121 Overview The Cisco WAP121 is a sleek, affordable, wireless access point that delivers fast, reliable wireless connectivity and enables small businesses to easily expand their wired networks. The device combines ease of use with business-class features such as support for IPv6, Power over Ethernet for simpler deployment, quality of service to prioritize network traffic, and advanced security to deliver the reliability and performance needed for small business networks. The sleek and elegant design with flexible mounting options allows it to seamlessly blend into any small business environment. It can be managed with an intuitive browser-based GUI and is backed by a limited lifetime warranty. Cisco WAP121 Features: ● Highly secure, high-speed 802.11n wireless networking delivers enhanced throughput and extended range for bandwidth-intensive applications. ● Wizard-based setup and configuration enables fast, simple deployment. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, protects sensitive business information. ● Support for PoE enables easy installation without expensive additional wiring. ● Client bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Elegant, compact design with internal antennas and versatile mounting kit enables installation on a ceiling, wall, or desktop. ● IntelligentQoS prioritizes network traffic to help keep critical network applications running at top performance. ● Power-saving sleep mode and port control features help maximize energy efficiency. ● Highly secure guest access enables safe wireless connectivity for visitors. ● Support for IPv6 Contact US for details : +91-9911567618/9717317430 Write us : sales@fidemonline.com URL : http://www.fidemonline.com

New Improved Remote Controller Board Kit For Wireless Robot - 433 Mhz Rx Tx (Ideal for Robotic Vehicle) with power supply circuit Features/Specification  1.Power Supply to Transmitter Board - 9V (Battery Free) 2.Power Supply to Receiver Board -12V (Battery not Included) 3.Easy Interface with microcontroller (If required) 4.Comes with DPDT Relay Board to control 2 DC Motors(upto-4, if connected 2 left and 2 right side motor