Ic wireless rf

Description Package Includes: 1 Piece new  IC Wireless 4 -Channel RF Remote control Transmitter & Receiver Kits It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Remote control 1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4.Modulation mode: ASK (Amplitude Modulation) 5.Transmitting frequency: 315MHZ (SAW frequency stabilization) 6.Transmission distance:M (Open field the receiver sensitivity -100dbm) 7.Encoder types: fixed code 8. The frequency of this product is 315 mhz. With decoding receiver board 1.The operating voltage DC5V, receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 2.Size: mm There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Module function description: This module contains no self-locking function, simple implementation, wireless remote control by pressing a key, the receiver output a high level, the corresponding output when key releases. High level at the receiving end disappear, and each channel are independent of each other, each other. The output of high level can directly drive the relay, as shown

Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module Descriptions: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm Technical Parameters: Input Voltage: 1.9 ~ 3.6V Size: 34mm X 17mm X 1mm     Package Included: 1 x Arduino NRF24L01+ 2.4GHz Wireless Transceiver Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band.  Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller.    Features Worldwide license-free 2.4GHz ISM band operation 250kbps, 1Mbps and 2Mbps on-air data-rate options Enhanced ShockBurst™ hardware protocol accelerator Ultra low power consumption – months to years of battery lifetime   Specifications Power supply: V IO port working voltage:  0~3.3v / 5v Transmitting rate: +7dB Receiving sensitivity: ≤ -90dB Transmission range: 250m

Cheapest Wireless Solution for upto 100 Meter* With Inbuilt antenna. When Tx rate is Set 250 Kbps, Range is Really Good. Good for Home Wireless Automation Projects. If you are looking for Long Range ( Meter) NRF Module Click   HERE We have Ready Library to use with AVR / PIC Microcontroller. After you Purchase Please let us know via Message. ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket   from us. Which includes everything you want to start with your NRF24L01+ RF Communication. Features: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm. Powered by Turbo Lister

Measy   2.4Ghz wireless air mouse + touchpad keyboard can accomplish functions of traditional keyboard and mouse. With the cordless air mouse + keyboard you can quickly and precisely move the cursor and type directly on the screen, and control your PC, smart TV or  Android TV box. Main Features: - High sensitivity touchpad keyboard + air mouse - 2.4GHz intelligent connection, plug and play - Real QWERTY full function mini keyboard with more defined buttons - Touchpad functional handheld keyboard - Auto sleep mode: Automatically into sleep mode 2 minutes left without operation - Convenient and efficient for conference, presentation and lecturing - To enjoy PC multi-media entertainment at home - To share large TV and projector screen - Large PAD for handwriting   Powered by Turbo Lister

This is a listing for 1 Way Remote  Control Switch (Works 50 To 100 MTS) ON/OFF One Lamps/Fan or Any Other Loads  - 220 V, Watt /4 Amp Load Product Description: 100% Brand New Excellent Quality Voltage:220v/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way:Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery One Way Control:Remote Control, Manuel Control, Head Control. Radio Frequency, Anti-Interference, No Barrier Not Obstructed By Walls, Capable of Connecting Any Load Applicable To All The Common Lamps Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility Digital Telecontrol Switch 1-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote Control, Replace Original Wall Switch Directly Compact Size  Light Weight. Shell Material: Metal Case / Aluminum Base Color: Sliver Weight:  250g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Water Pump, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a Power Backup (Inverter) at Your Home Because if Power Fail/Cut and Return/Come Back Again Then This Unit Automatically Any One or All Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Applications: Suitable For Home, Office, Hotel, Factory, Hospital, etc Package Include: 1x Receiver (Stainless steel shell) 1x Transmitter (Remote) 1x Battery (12V 23A)

This is a listing for 5 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 5 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way: Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 5 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 4-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote Controller Powered by 1 x 23A / 12V Battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A) 

This is a listing for 4 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 4 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way:Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 4 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 4-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote controller powered by 1 x 23A / 12V battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A) 

This is a listing for 3 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 3 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way: Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 3 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 3-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote Controller Powered by 1 x 23A / 12V Battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A) 

4 Way Remote  Control Switch Switch ON/OFF 4 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product  Description:  Voltage:220v-250V/HZ Standby Power Consumption Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm  Load For Each Way:Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m  4 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently,   Operates on Radio Frequency,  not blocked by any Obstacles  IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself Only  Buy If You Can Arrange An Electrician To Fit The Same  Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE

Dear Buyer,   We maintain high standards of excellence and strive for 100% customer satisfaction. Positive feedback is very important to us, simply leaving negative or   neutral feedback can't solve the problem. If you have any questions, please contact us first, so that we can satisfactorily address your concerns.   Thank You   ########################### Product Description Starts ###########################   Features Suitable for incandescent and energy-saving lights. High quality and low price Fast response and long control distance. Stable performance and strong to resist interference, not obstructed by walls! Easy  to install and simple to use. Specification Operating Temperature: Brand Name: Hesunse Max. Voltage: AC 250V Input Power: AC180V~250V(HZ) Max Load Power(per way): W(incandescent) 300W(LED light) Material: ABS plastics(remote controller) Powdering iron(receiver) Control Distance: 20M

Description:   The scope of application can be used for incandescent lamps, energy saving lamps, fluorescent ring light tubes, fluorescent tubes, the combination of chandeliers, decorative lights, LED lights with, LED lights, electric fans, televisions, computers, electrical and other household appliances Feature: 1.One 23A 12V battery (Not included)  put inside of remote; 2.This is fixed wall 4 channels light ON/ OFF switch with remote control 3.Remote control range is up to 50 meters, not obstructed by walls 4.Nice to control your light,your device

RF TRANSMITTER &  RECEIVER  433MHZ WITH ENCODER AND DECODER BOARDS About • Ready to use with 8 bit Microcontrollers • Input power supply- 5v • 4 data lines connected to Burgstick • Test switch on each Data bit • Output LED's on each Data bit • Frequency 433Mhz. Inclusions  1 X  RF TRANSMITTER & RECEIVER 433MHZ WITH ENCODER AND DECODER BOARDS Shipping We ship as soon as possible once we receive the paisapay order. shipping may take 2-4 days. Shipping partners -  FedEx, DTDC, Blue Dart, Speedpost  and Delhivery. We also have all types of  Sensors, Display, Camera, Jack/Connector, Wireless Machines and tools, Power Supply, Arduino, controller board, Motors, IC, Electro Component, misc. VERO Boards, Chassis, Wires, General & Components. If you want any product under these categories we will be happy to list them for you. Pls visit our store http://stores..in/Robocraze-In For any queries regarding the product, transaction, delivery, bulk ordering, combo ordering or anything else  please feel free to send a P.M or a mail to  .  Will reply A.S.A.P.  Call Us At:   +91 HAPPY SHOPPING:D Thank you. : D

RF TRANSMITTER &  RECEIVER  433MHZ WITH ENCODER AND DECODER BOARDS About • Ready to use with 8 bit Microcontrollers • Input power supply- 5v • 4 data lines connected to Burgstick • Test switch on each Data bit • Output LED's on each Data bit • Frequency 433Mhz. Inclusions  1 X  RF TRANSMITTER & RECEIVER 433MHZ WITH ENCODER AND DECODER BOARDS Shipping We ship as soon as possible once we receive the paisapay order. shipping may take 2-4 days. Shipping partners -  FedEx, DTDC, Blue Dart, Speedpost  and Delhivery. We also have all types of  Sensors, Display, Camera, Jack/Connector, Wireless Machines and tools, Power Supply, Arduino, controller board, Motors, IC, Electro Component, misc. VERO Boards, Chassis, Wires, General & Components. If you want any product under these categories we will be happy to list them for you. Pls visit our store http://stores..in/Robocraze-In For any queries regarding the product, transaction, delivery, bulk ordering, combo ordering or anything else  please feel free to send a P.M or a mail to  info@robocraze.com.  Will reply A.S.A.P.  Call Us At:   +91 8123057137 HAPPY SHOPPING:D Thank you. : D

RF Controlled Wireless Robot using Microcontroller DIY(DoItYourself) PROJECT Kit Motor control through RF communication is a very interesting application and is widely used

Wireless Bluetooth RF Transceiver Module RS232 TTL (HC-06) bluetooth module better then HC-05 Allows your device to both send or receive the TTL data via Bluetooth technology wirelessly without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

Wireless USB PPT Presenter PowerPoint Remote Control Presentatio Features: 1.Brand new & high quality. 2.Laser pointer with RF wireless control is a new product designed specifically for computers and multimedia projectors. Ideal for lecturers, meeting presenters, teachers, sales managers or anyone giving a Power Point presentation 3.Supports MS Word, Excel, PowerPoint, ACD See, website etc. With page up and down, Dark Screen and Escape/Resume functions 4.Pages could be turned freely and silently, and highlight effects can be obtained

M4 Lock Receiver with 4 Keys Wireless Remote Control, Four Ways Wireless Remote Control Kit Four Ways Wireless Remote Control Kit,M4 the lock Receiver with 4 Keys Wireless Remote Control Specification: Operating voltage (V): DC5V Quiescent Current (mA): 4.5MA Modulation: AM (OOK) Operating Temperature: -10 ° C to +70 ° C Receiver sensitivity (dBm):-105DB Operating frequency (MHz): MHz (MHZ frequency segment can be optional) Encoding: the pad code (fixed code) Dimensions (LWH): mm   Working: M4 (Jog: Press and hold let go on the output, let go to stop the output), L4 (interlock: four at the same time there can be only one output), T4 (self-locking: four independent outputs are not mutuallythe impact of click output and then click stop output)   Product Features: The super-regenerative receiver module using the LC oscillator circuit containing amplifier shaping, the output data signal is decoded high signal, extremely easy to use and inexpensive, so widely used. With four decoder output (can be changed to six-way jog or interlock output), easy to use; frequency debugging easy, short lead times; consistency of product quality, cost-effective. Receiver module has a wide receiver bandwidth, typically ± 10MHz, factory general tone

DESCRIPTION 15 MHz ASK Transceiver Module Transmitter: The 315 MHz transmitter will work with the RF Links at 315 MHz at either baud rate. Only one 315 MHz transmitter will work within the same location. This is an ASK transmitter module with an output of up to 8mW depending on power supply voltage. The transmitter is based on SAW resonator and accepts digital inputs, can operate from 2 to 12 Volts-DC, and makes building RF enabled products very easy. Receiver: This receiver type is good for data rates up to bps and will only work with the 315 MHz transmitter. Multiple 315MHz receivers can listen to one 315 MHz transmitter. This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The receiver is operated at 5V. We have used these modules extensively and have been very impressed with their ease of use and direct interface to an MCU. The theory of operation is very simple. What the transmitter 'sees' on its data pin is what the receiver outputs on its data pin. If you can configure the UART module on a controller, you have an instant wireless data connection. The typical range is 500ft for open area. This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, and even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The transmitter operates from 2-12V. The higher the Voltage, the greater the range - see range test data in the documents section. Specifications RF Transmitter Features Frequency Range: 315 MHZ. Supply Voltage: 3~12V Output Power: 4~16dBm Circuit Shape: Saw RF Receiver Features Receiver Frequency: 315 MHZ Typical sensitivity: -105dBm Supply Current: 3.5mA Frequency: 1MHz Low power consumption Operation voltage: 5 Volts We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

This RF modulecomprises of an RF Transmitterand an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 434 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. The transmission occurs at the rate of 1Kbps - 10Kbps.The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter. The RF module is often used alongwith a pair of encoder/decoder. The encoder is used for encoding parallel data for transmission feed while reception is decoded by a decoder. HT12E-HT12D, HT640-HT648, etc. are some commonly used encoder/decoder pair ICs.

Description: The TX is an ASK transmitter module.The TX isdesigned specifically for remote-control, wireless mouseand car alarm system operating at MHz.The RX is a miniature receiver module that receives On-offkeyed (OOK)modulation signal and demodulated to digital signal for the next decoder stage.The RX is designed specifically for remote-control and wireless security receiver operating at Mhz. UART TTL o/p - Baud Rate - . Features: Input Power supply - 5 Volts Compatible for Both RF Mhz Interface upto 8 Bit Data. UART TTL o/p - Baud Rate - Package Includes with RF Tx Rx. Indicating LED's. High quality PCB FR4 Grade with FPT Certified.     Package Contains: RF TX RX with 8 Bit Encoder and Decoder. Billing: Xbee Development Board(RDL/GRS//V1.0) VAT Bill is included. Rules and Regulations: All Items

An RF module (short for the radio-frequency module) is a (usually) small electronic device used to transmit and/or receive radio signals between two devices. In an embedded system it is often desirable to communicate with another device wirelessly. This wireless communication may be accomplished through optical communication or through radio-frequency (RF) communication. For many applications, the medium of choice is RF since it does not require a line of sight. RF communications incorporate a transmitter and a receiver.

WELCOME TO ROBOCENTRAL *** HC-06 Bluetooth RF Transceiver Module *** !!   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ***DESCRIPTION*** This is a bluetooth module for use with any microcontroller.  It uses the UART protocol to make it easy to send and receive data wirelessly.  The HC-06 module is a slave only device.  This means that it can connect to most phones and computers with bluetooth.   !!!  SPECIFICATIONS  !!! A breakout board for easier connectivity Designed for 3.3v level ttl but will accept 5v level as well Built

Amkette Wi-Key Touch Keyboard Introducing Wi-Key Touch - Wireless Keyboard with Multi-touch Pad. An advanced Remote Control for Your Computer that allows multi-angle connectivity from up to 10 meters with plug & play feature. Connect your computer / laptop to your LCD / TV and enjoy movies, music, photos, games, and video or just about anything that you do on your computer. What?s more? Now experience the computing on a bigger screen with life-size enjoyment. Key features -  2.4 GHz Wireless interface  Built-in multi finger smart touch pad  Laptop style tactile keys for smooth typing  Power saving circuit for long battery life  Plug & play interface  Xbox/PS3 Compatible Specifications - Interface 2.4 GHz RF No of Channels 15 Ideal Working Condition 50C~500C, % RH 250C Key Board Type USB Total Keys 88 Special Function Keys/Multimedia Keys 8 Product Dimensions 310 x 230 x 20 mm Operational Distance Upto 10 Metres RAM 256 MB minimum Port USB 1.1 or later OS Supported Windows 98(Device driver needed), , XP, Vista, 7, Mac OS X, Linux Available Colors Metallic Gray Warranty 1 Year

Sennheiser RS110 II RF Wireless On-Ear Headphone Overview The RS 110 II breathes new life into audio with its high sound quality and sleek design. Its detailed, balanced sound reproduction coupled with strong bass response makes it an ideal choice for all types of music and TV applications. Rediscover the world of wireless freedom with a touch of simplicity and elegance. Features Open, supraaural, wireless RF headphone system Detailed, warm sound reproduction with strong bass Suitable for all types of modern music and TV applications Wireless freedom with reception through walls and ceilings Range of up to 100 metres (300 feet) Volume and tuning controls conveniently located on the headphone Lightweight and comfortable 2-year warranty Specifications Of Sennheiser RS110 II RF Wireless On-Ear Headphone Color silver Impedance 24 Ω Dimensions 85 x 110 x 133 mm Connector Jack 3,5 mm/6,35 mm stereo Frequency response (headphones) Hz THD, total harmonic distortion Ear coupling Supraaural Transducer principle Open, Dynamic Weight Transmitter:   180 g Receiver:   230 g Power consumption Signal-to-noise ratio > 65 dBA Operating time 22 h Modulation FM stereo Power supply Receiver:   2 AAA batteries Transmitter:   9 V DC (receiver) SPL for peak deviation 106 dB

SENNHEISER Wireless Headphones RS 110 The RS 110 is an open, supra-aural wireless RF headphone system. Its transparent and well-balanced sound with great bass response makes this system an ideal choice for all types of music and TV applications. Enjoy total freedom of sound without a physically restricting cable at an affordable price. The ideal entry into the cordless world of sound. Features Open, stereo, supra-aural, wireless RF headphone system Detailed, analytical sound reproduction with strong bass response Perfectly suitable for all types of modern music and TV applications "Wireless freedom of sound" with reception through walls and ceilings, even outside