Input side fusible circuit

FIELD MIXER FOR MICROPHONES 6 INPUT SHURE M 367 High-volume headphone output  Description: Improving on the success of the M367 microphone mixer, the M367 incorporates all the M267 features and adds several new features to meet the needs of demanding field production environments. The M367 has 25 dB quieter circuitry, six balanced mic/line inputs, 12-and 48-volt phantom power, input clipping LEDs, two XLR outputs, two position Mix Bus and easy-access side battery compartment. The M367 also has a detachable power cord, output peak/limiter LED, adjustable limiter threshold, headphone monitor circuit, Power On LED, and color-coded rubberized knobs with tactile position indicators. Battery (two standard 9-volt alkaline) or Vac power. Rack mountable with the A367R. Features: Exceptionally quiet design, suitable for use with DAT, recordable CD, and other digital formatsExtended frequency response of 20 Hz to 20 kHzDynamic range greater than 100 dBTransformer-balanced inputs and outputs for superior rejection of RFI and electromagnetic humSix selectable mic/line inputsSelectable mic/line output and dedicated line outputMetal XLR input and output connectorsWide-range input gain controls handle hot signal levels without attenuators48 V or 12 V phantom power for condenser microphonesSwitchable low-cut filters on each inputPeak indicator LED on each inputProfessional mechanical VU meter -- LED backlighting for high reliability, no lamp replacementBi-color output LED shows output limiting and peak indicationOutput peak limiter with switchable threshold1 kHz tone oscillatorMix bus jack to link M367s or other mixersBalanced Mix Bus connection to other M367sMonitor input via Phones push/pull controlHeadphones volume control1/4" and 3.5 mm jacks for stereo headphonesCustomized operation via internal DIP switches, trim pots, and optional alternate wiringRegulated voltage rails (±15 Vdc) provide exceptional headroomPower-on LEDBattery check switch and low battery warning indicationAC power operating range from 100 to 120 volts, Hz or Vac, HzSoft-touch, color-coded control knobs with raised position indicatorsRugged all metal chassis with protective end capsDetachable ac power cordBackup/field operation powering with two 9-volt batteriesAutomatically and silently switches to battery operation should ac voltage failDesigned and manufactured

This product is a configurable solar battery charger for 4V, 6V and 12V lead acid batteries. It provides a charging current up to 3A. The charger offers a DC Jack for connecting Solar Panel on the input side and a battery charging cable with crocodile clip terminations on the output side. Solar Panel can charge batteries upto 10Ah rating (Charging Time: 8-10 hours). A three-way pre-settable switch allows you to configure the charger as per the battery ratings.This product offers thermal, short circuit and reverse input circuit protection. A red LED indication is available to show the presence of a valid charging source.The product is highly recommended for charging lead acid batteries used

1 Channel Isolated 5V Relay Module Coupling For Arduino PIC AVR DSP ARM   the module is compliant with international safety standards, control and load areas isolation trenches; a single relay a genuine; power supply and relay instructions, lit, disconnect is off; input signal, signal, common Terminal and start conducting; can be used as a single chip modules can be used for appliance control; DC or AC signal, control, you can control the 220V AC load; there is a normally open and one normally closed contact; Specification: One normally closed contact and one normally open contact Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for avoidance of malfunction Power supply indicator lamp Control indicator lamp Channel: 1 channel Relay Voltage: 5V Note  on the high level and low level triggered mode, friends who do not understand, have a look: High level trigger refers to the signal voltage between input and trigger, can be understood as a signal input with VCC cathode short-circuit triggered a way; Low level trigger refers to the signal voltage between input terminal and Earth OV trigger, can be understood as signal input terminal and the GND negative electrode short circuit triggered a way  1-channel relay module connection Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

DSPIC33EP128GM604 microchip MCU controller brand new warranty 16K RAM & 128K mem + TQFP to DIP Adapter PCB Board Specs Package - 1 MCU + 1 Adapter This is a Double-Side PCB Circuit Board.  A side for pin pitch size 0.8mm,It can be used for most of the TQFP (compatible with 32pin~64pin) to 2.54mm DIP. B side for pin pitch size 0.5mm,It can be used for most of the TQFP (compatible with 32pin~100pin) to 2.54mm DIP. Features Operating Conditions 3.0V to 3.6V, -40°C to +85°C, up to 70 MIPS 3.0V to 3.6V, -40°C to +125°C, up to 60 MIPS  Core: 16-Bit dsPIC33E CPU Code-Efficient (C and Assembly) Architecture Two 40-Bit Wide Accumulators Single-Cycle (MAC/MPY) with Dual Data Fetch Single-Cycle Mixed-Sign MUL plus Hardware Divide 32-Bit Multiply Support  High-Speed PWM Up to 12 PWM Outputs (six generators) Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources Dead Time for Rising and Falling Edges 7.14 ns PWM Resolution PWM Support for:  DC/DC, AC/DC, Inverters, PFC, Lighting BLDC, PMSM, ACIM, SRM Programmable Fault Inputs Flexible Trigger Configurations for ADC Conversions Supports PWM Lock, PWM Output Chopping and Dynamic Phase Shifting  Advanced Analog Features Two Independent ADC modules: Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H or 49 analog inputs Flexible and Independent ADC Trigger Sources Up to Four Op Amp/Comparators with Direct Connection to the ADC module: Additional dedicated comparator Programmable references with 32 voltage points Programmable blanking and filtering Charge Time Measurement Unit (CTMU): Supports mTouch™ capacitive touch sensing Provides high-resolution time measurement (1 ns) On-chip temperature measurement  Timers/Output Compare/Input Capture 21 General Purpose Timers: Nine 16-bit and up to four 32-bit timers/counters Eight output capture modules configurable as timers/counters PTG module with two configurable timers/counters Two 32-bit Quadrature Encoder Interface (QEI) modules configurable as a timer/counter Eight Input Capture modules Peripheral Pin Select (PPS) to allow Function Remap Peripheral Trigger Generator (PTG) for Scheduling Complex Sequences  Communication Interfaces Four Enhanced Addressable UART modules (17.5 Mbps): With support for LIN/J protocols and IrDA® Three 3-Wire/4-Wire SPI modules (15 Mbps) 25 Mbps Data Rate for Dedicated SPI module (with no PPS) Two I2C™ modules (up to 1 Mbps) with SMBus Support Two CAN modules (1 Mbps) CAN 2.0B Support Programmable Cyclic Redundancy Check (CRC) Codec Interface module (DCI) with I2S Support  Direct Memory Access (DMA) 4-Channel DMA with User-Selectable Priority Arbitration Peripherals Supported by the DMA Controller include: UART, SPI, ADC, CAN and input capture Output compare and timers

Package Contents 1 x DC 3V to 5V USB Output charger Step Up Power Module Mini DC-DC Boost Converter Item specifications Brand Name:DC Converter     Size:24x18mm     Output Current:Rated 1A-1.5A     Output Power:1 - 50W     Type:DC/DC Converters     Input Voltage:1-5V     Output Voltage:V Weight:0.03g     Efficiency::Up to 96%     Switching frequency::500KHz     Output ripple::30mV (MAX) 20M bandwidth     Voltage indication::LED lights with load     Operating Temperature::Industrial (-40°c to +85°c)     Output::USB Output     Product Description - Features:         Module Properties: non-isolated step-up module (BOOST)         input voltage: 1-5V     Output voltage: V         Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)         Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)         Switching frequency: 500KHz         Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)         Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)         Operating Temperature: Industrial (-40°c to +85°c)         Full load temperature rise: 30°c         Quiescent Current: 130uA         Load regulation: ± 1%         Voltage regulation: ± 0.5%         Dynamic response speed: uS         Short circuit protection: None (Please use the lithium battery with protection.)         Input Reverse Polarity Protection: None         Connection: Welding         Input: IN + Postive, IN-Negative         Output: USB Output     Applications: Do It Yourself (DIY) make a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.    In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.    Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. Aslb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one aslb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, aslb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. Aslb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. Aslb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs 1600 step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. A3967slb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one a3967slb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, a3967slb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. A3967slb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. A3967slb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Description:- (Brand New Charger) In this Monsoon, Now CHARGE your vehicle at HOME (Car Battery fully charged only in 12hours) (Bike Battery fully charged only in 8 hours) This charger is specially designed with strongest output to charge a bike battery at home itself. Combination of modern technology is used in this charger to develop sophisticated and constant output. Pure heavy duty copper transformer used in this charger with high insulation having maximum efficiency and long life characteristics. Charger is housed in strong metal cabinet with side ventilated for best performance thoroughly. * Voltage / Current Ratings:- 1) Input: V / Hz 2) Output: 12V / 4Amp DC Indications: 1) Red LED: When charger is turned ON red led is activated. 2) Green LED: When battery is full charged green led is activated. 3) Yellow LED: When reverse or inverse battery terminals are connected yellow led is activated along with buzzer. * Protection:- 1) Short Circuit Protection. 2) Reverse Polarity Protection. 3) Over Charging Protection. (Free Delivery in all India) Origin Location: Surat (Gujarat) Warranty: 6 months