Mega r3 compatible

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE If you want  3.2'' TFT Touch Shield for Mega compatible please Click Here Item description: Compared to the old version, R3 version major changes: Atmega 16U2 chip alternative 8U2. Means a higher transfer rate and memory. without having to install the driver

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver

1 Piece Arduino Mega R3 Compatible (Clone) USB Board - ATmega CH340 with USB Cable Order more than one piece to save shipping cost. You can contact us at +91- for any question or concern. Device Details This device and other listings with words 'Compatible' and 'Developement'

3.2'' TFT LCD Touch Shield for Arduino Mega compatible HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Overview Arduino 3.2" TFT LCD Touch shield is an Arduino Mega compatible multicolored TFT display with touch-screen and SD card socket. It is available

Mega R3 Compatiable Microcontroller Board ATmega USB Cable of Arduino This MEGA is a 100% compatible derivative of current R3 Arduino Mega Note: This is Clone Board Mega AU (16 Mhz) R3 Board Highest Quality.  100% Arduino-Compatible. Product Technical Specification Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

This MEGA is a 100% compatible derivative of current R3 Arduino Mega Note: This is Clone Board Mega AU (16 Mhz) R3 Board Highest Quality. 100% Arduino-Compatible. Product Technical Specification Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

Arduino Mega R3 compatible board BEST QUALITY AMONGST ALL OTHER ARDUINO CLONES AVAILABLE Arduino Clone based on current open source hardware   Product Description: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

Arduino Mega R3 compatible board Arduino Clone based on current open source hardware Product Summary: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz

PRODUCT DETAILS: Arduino UNO R3 Compatible Board ATmega328P ATmega16U2 with USB cable DESCRIPTION This is a Compatible board for Arduino uno r3, not original This UNO is a 100% compatible derivative of current R3 Arduino UNO The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller;simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Features:- Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

1 Piece Arduino UNO R3 Compatible (Clone) Board - ATmega328P CH340 microUSB (No USB Cable) You can use any mobile data cable to connect it to computer. Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details This device and other listings with words 'Compatible' and 'Developement'

UNO R3 Development Board For Arduino Compatible with USB Cable This UNO R3 BOARD is a 100% compatible derivative of current R3 Arduino UNO's This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY Delivery Time: 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers: http://arduino.cc/en/Main/Software No need to install any additional driver

UNO R3 Development Board For Arduino Compatible with USB Cable This UNO R3 BOARD is a 100% compatible derivative of current R3 Arduino UNO's This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY Delivery Time: 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver

package includes 1 UNO r3 board 1 usb cable for connecting to pc software can be downloaded from arduino website same design as original arduino uno r3 (please note that this is not original arduino that is made

ATmega328P CH340G UNO R3 Board for Arduino DIY Specs: : MATmega328P Board Condition: New Add two rows of the holes for the pins. So it can be connected with normal Dubond line. Add 3 rows of the holes for wiring. Change the in-line package of ATMEGA328P to flat package. CH340G Replace ATmega16U2 CH340G Driver Download link:http://www.wch-ic.com/download/list.asp?id=126 Cable length: 51.5cm Color:as shown above Net weight:51g Weight:61g Package Include: 1 x ATmega328P CH340G Board 1 x USB Cable 7 x Gilded Pin PLS NOTE that due to lighting effects, monitor's brightness/ contrast settings ect, there could be some slight differences

ARDUINO UNO R3 DEVELOPMENT BOARD ATMEGA328P | CH340G | WITH USB CABLE   Package Include: ·         1X ATMEL ATmega328P  CH340G BOARD, USB Cable included   Product description:   Main changes from the older version:  CH340G replace ATmega16U2 AUTO POWER SELECTION FEATURE ENABLED Technical Details: Microcontroller: ATmega328P Operating voltage: 5V  Input Voltage (recommended): 7-12V (EXTERNAL), 5V(USB) Digital I/O Pins: 14 (of which 6 provide PWM output)  Analog Input Pins: 6  DC Current per I/O Pin: 40mA  DC Current for 3.3V pin: 50mA  Flash Memory: 32 KB (ATmega328P) of which 0.5KB used by bootloader  SRAM: 2 KB (ATmega328P)  EEPROM: 1 KB (ATmega328P)  Clock Speed: 16 MHZ  USB Chip CH340G Usage Instructions: Click here for the driver software Before connecting the Board to your USB port: 1.     Download the “ch341ser.exe” file and run it. 2.     The software asks whether it can install the CH341SER.INF driver for the CH340 chip. Click INSTALL 3.     A Windows message asks whether the driver has installed correctly. Click YES. 4.     Connect your Board. 5.     From Control Panel, open Device Manager and Ports. If installed correctly you should see an entry “USB-SERIAL CH340 (COMXX) Install Arduino IDE Download Here http://arduino.cc/en/Main/Software Connect Board to Computer and open Arduino IDE. Select board as "Uno"

The package consists of the board shown above and a USB cable. The board is fully compatible with the original arduino. Please refer to the below link for the detailed product description: http://arduino.cc/en/Main/arduinoBoardUno All required development tools and examples can be downloaded from the arduino website

Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz  ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset  button. It contains everything needed to support the microcontroller;simply connect  it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get  started. Features:-  Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz  ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset  button. It contains everything needed to support the microcontroller;simply connect  it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get  started. Features:-  Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328)

Arduino Mega R3 compatible board Arduino Clone based on current open source hardware Product Summary: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz Features: v   Completely solved the traditional board that is not compatible with win7 and win8. v   Increased the pin socket, to facilitate the use of DuPont line cables. v   Replaced Atmega16u2 with CH340G which can easily communicate to Arduino IDE directly.                 Package Include: v   One piece of Arduino Mega board v   One USB cable v   A plastic container box. Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

TFT LCD touchscreen display Mega shield v2.2 for arduino mega r3 TFT '' touch LCD Shield for Arduino Due/Mega Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description: ·         The TFT01 LCD module works at 3.3V voltage and it's not compatible with Arduino MEGA pins, here`s a solution, ·         A shield for Arduino MEGA. Now user can directly plug the TFT01

TFT LCD touchscreen display Mega shield v2.2 for arduino mega r3     Product Description: v   The TFT01 LCD module works at 3.3V voltage and it's not compatible with Arduino MEGA pins, here`s a solution, v   A shield for Arduino MEGA. Now user can directly plug the TFT01