Mega r3 usb cable

Mega R3 Compatiable Microcontroller Board ATmega USB Cable of Arduino This MEGA is a 100% compatible derivative of current R3 Arduino Mega Note: This is Clone Board Mega AU (16 Mhz) R3 Board Highest Quality.  100% Arduino-Compatible. Product Technical Specification Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

Product Description: The Mega is a microcontroller board based on the   ATmega ……… Summary Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz

Arduino mega r3 development board with ATmega + ATmega16U2 with USB cable Arduino mega clone based on current open source hardware atmega atmega16u2 arduino mega best quality Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.     Product Summary Mega : ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz

Arduino Mega R3 with ATmega + Free USB Cable Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz Length mm Width 53.3 mm Weight 37 g

Arduino Mega 2560 R3 with ATmega 2650+ Free USB Cable Microcontroller ATmega2560 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz Length 101.52 mm Width 53.3 mm Weight 37 g

1 Piece Arduino Mega R3 Compatible (Clone) USB Board - ATmega CH340 with USB Cable Order more than one piece to save shipping cost. You can contact us at +91- for any question or concern. Device Details This device and other listings with words 'Compatible' and 'Developement'

Arduino Mega R3 compatible board Arduino Clone based on current open source hardware Product Summary: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz Features: v   Completely solved the traditional board that is not compatible with win7 and win8. v   Increased the pin socket, to facilitate the use of DuPont line cables. v   Replaced Atmega16u2 with CH340G which can easily communicate to Arduino IDE directly.                 Package Include: v   One piece of Arduino Mega board v   One USB cable v   A plastic container box. Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

Arduino Mega R3 compatible board BEST QUALITY AMONGST ALL OTHER ARDUINO CLONES AVAILABLE Arduino Clone based on current open source hardware   Product Description: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

Arduino Mega R3 compatible board Arduino Clone based on current open source hardware Product Summary: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz

1 x UNO R3 MEGA328P ATMEGA16U2 board                       +  1 x USB cable  + 1 Plastic Carry Box  Product Description: 100% Brand New,  It is based on  MEGA328P Chip with 16U2 (UNO R3) feature,high quality clone. ATMEGA16U2 MEGA328P  UNO R3 Color of USB Cable: blue Transparent Plastic Carry Box   Package Include: 1 x UNO R3 MEGA328P ATMEGA16U2 board +  1 x USB cable + 1 Plastic Carry Box   Performance description: Digital I/O Digital input/output terminal, a total of 0 ~ 13. Analog I/O Analog input/output terminal, a total of 0 ~ 5. Support the ISP download function. The input voltage: when connected to the computer USB without external power supply, external power supply 5 v ~ 9 v dc voltage input. Output voltage: 5 V dc voltage output and 3.3 V dc voltage output. Using Atmel Atmega328 microprocessor controller. Payment Options:   Payment by PaisaPay only, Safest payment mode on .  Terms and Conditions: Orders are expected to be shipped within 2 days of receiving cleared payment  excluding holidays.. Shipping details will be emailed to you after the item is shipped and then you can track your order. No Address change entertained once the order is placed. Please refuse to accept the package from courier if its

AROBOTSHOP  ARDUINO UNO R3 Original Development Board with USB Cable Features:- Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz Contact us: Arobot www.arobot.in Phone: Mobile: Email to us: 

www.hitroncomponents.com Package Contents   1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD 1 x FREE USB Cable   "INSTALL CP DRIVER BEFORE CONNECTING THE BOARD" CLICK THE LINK BELOW FOR CP DRIVER http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software If you get any difficulty during driver installation you can freely contact to for technical support You might be thinking that how we are able to sell these board

www.hitroncomponents.com GET YOUR COMPANY LOGO ON BOARD WITH HEAVY DISCOUNT (MINIMUM ORDER QUANTITY 250)   Package Content 1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD 1 x FREE USB Cable   "INSTALL CP DRIVER BEFORE CONNECTING THE BOARD" CLICK THE LINK BELOW FOR CP DRIVER http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software If you get any difficulty during driver installation you can freely contact to for technical support You might be thinking that how we are able to sell these board

Description: The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Summary Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz Length 68.6 mm Width 53.4 mm Weight 25 g We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED Contact us for Special Price if you want to buy more than 5Pieces of this item Item description: Compared to the old version, R3 version major changes: Atmega 16U2 chip alternative 8U2. Means a higher transfer rate and memory. without having to install the driver

Description: This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins. Special SMD Version:Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega is becoming more and more difficult to get. To keep up with demand, we now offer the Arduino Uno R3 with an SMD ATmega. Features: ATmega328 microcontroller Input voltage - 7-12V 14 Digital I/O Pins (6 PWM outputs) 6 Analog Inputs 32k Flash Memory 16Mhz Clock Speed We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

The Arduino Uno is a micro controller board based on the ATmega328. Summary Micro controller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz

Main Changes from the older version:  • Add two rows of the holes for the pins. So it can be connected with normal Dupont line.  • Add 3 rows of the holes for wiring.  • Change the in-line package of ATMEGA328P to flat package.  • CH340G Replace ATmega16U2  package includes *  ARDUINO UNO R3 * USB CABLE *20 PCS MALE TO MALE BREADBOARD WIRES 10 CM *20 PCS FEMALE TO FEMALE DUPONT WIRES 20 CM * BURG STRIPES AS SHOWN IN FIGURE FOR ANY QUERY mail to 

2 Pcs (One pair) ATMega R3 Compatiable Microcontroller Board with Free USB Cable of Arduino This MEGA is a 100% compatible derivative of current R3 Arduino Mega Note: This is Clone Board Mega AU (16 Mhz) R3 Board Highest Quality.  100% Arduino-Compatible. Product Technical Specification Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

Arduino mega r3 development board with ATmega + ATmega16U2 with USB cable Arduino mega clone based on current open source hardware atmega atmega16u2 arduino mega best quality 1 set or ARDUINO MEGA R       Product Summary Mega : ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz

Internet of Things (IOT) Starter Kit * With Arduino Mega (More functions compared to Arduino UNO R3) * W Ethernet Shield (Connect Arduino to Internet / Cloud without PC) * Temperature Sensor * Light Sensor * 4 digit 7 segment display * Breadboard * DUPONT Jumper cables x 20 * Relay 5v * Trim pot 10k * Transistor 2N * Diode 1N * Resistor 220 ohm x 10 * Resistor 10k x 10 * Red, Green and Yellow LEDs (3 + 3 + 1) * DC Power Adapter (9v 1A) * Network Cable RJ 45 * USB Cable (Type A - B) * Quick Component Reference book (Hard copy) * Companion CD with ready to use code * 15 Exciting IOT projects with step-by-step instructions [e.g., Control Home lights with mobile phone, e-mail alert, Twitter post from Arduino, saving sensor data

PRODUCT DETAILS: Arduino UNO R3 Compatible Board ATmega328P ATmega16U2 with USB cable DESCRIPTION This is a Compatible board for Arduino uno r3, not original This UNO is a 100% compatible derivative of current R3 Arduino UNO The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller;simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Features:- Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

www.hitroncomponents.com Package Contents   1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD 1 x FREE USB Cable   "EXTERNAL POWER SUPPLY IS NOT INCLUDED & HAS TO BE PURCHASED SEPARATELY"   Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software For bulk order get special price Contact Details   Have any queries, Feel free to contact us anytime   Ph: +91-   or email us:   or contact us through by clicking "Ask seller a question"   Feedback Details   In case, you are not satisfied with the item or have any questions or complaints, please contact us before leaving a Feedback.   Leaving Negative or Neutral Feedback will not solve a problem,   We are always willing to solve the problems of buyers.   "Your feedback is very important for us to grow our business on , so please do leave positive feedback"       The Arduino Uno is a microcontroller board based on the  ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards

Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards

Package Contents 1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD 1 x FREE USB Cable "COLOR OF CABLE AND LOGOS ON BOARD MAY BE DIFFERENT FROM THE IMAGES SHOWN. IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY" "EXTERNAL POWER SUPPLY IS NOT INCLUDED & HAS TO BE PURCHASED SEPARATELY" Buy Original Arduino UNO R3 from  www..in/itm/ Download Arduino IDE & Drivers:  http://arduino.org/downloads This is the new Fully 100% compatible derivative version of Uno R3 based on current open source hardware.  In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included

UNO R3 Development Board ATmega328P ATmega16U2 with USB cable 100% compatible UNO R3 Development Board ATmega328P ATmega16U2 with USB cable 100% compatible 100% compatible Arduino UNO Board The new Uno is the latest version after the Duemilanove, with an improved USB interface chip. Like the Duemilanove, it not only has an expanded shield header with a 3.3V reference and a RESET pin (which solves the problem of how to get to the RESET pin

Description: This Kit Is Designed To Get You Started Quickly And Easily On Your Path Of Learning Electronics. Once You'Ve Received Your Super Starter Kit You Can Start To Paly With Electronics And Programming Experience. Now, See The Below Mention List You Can Quickly Design These Projects With The Help Of This Super Starter Kit And Many More. Features: This Kit Is Designed To Get You Started Quickly And Easily On Your Path Of Learning Electronics. Once You'Ve Received Your Super Starter Kit You Can Start To Paly With Electronics And Programming Experience. Now, See The Below Mention List You Can Quickly Design These Projects With The Help Of This Super Starter Kit And Many More. Kits Includes: 1. 40x Male to male jumper wire 2. 40x Male to Female Jumper Wire 3. 2x 1 microFarad Capacitor 4. 5x Tactile Switch 5. 40 pin Male Header 6. 1x Breadboard 7. 4x 10nanoFarad Capacitor 8. 1x 16x2 LCD 9. 1x L293D IC 10. 1x A to B type USB Cable 11. 1x Bridge Rectifier 12. 2x Seven Segment Display 13. 1x 555 Timer IC 14. 1x (8x8 Dot Matrix Led Display) 15. 2x Buzzer 16. 1x DC Motor 17. 1x Fan 18. 1x RGB Led 19. 2x Optocoupler ELx PNP Transister 21. 2x NPN Transister 22. 1x Rain Drop Sensor Module 23. 1x Slider Switch 24. 1x POT 25. 1x Accellometer ADXLx Diode INx Red Led 28. 2x Green Led 29. 2x Yellow Led 30. 2x White Led 31. 4x 100nF capacitor x Resister We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

ARDUINO UNO R3 DEVELOPMENT BOARD ATMEGA328P | CH340G | WITH USB CABLE   Package Include: ·         1X ATMEL ATmega328P  CH340G BOARD, USB Cable included   Product description:   Main changes from the older version:  CH340G replace ATmega16U2 AUTO POWER SELECTION FEATURE ENABLED Technical Details: Microcontroller: ATmega328P Operating voltage: 5V  Input Voltage (recommended): 7-12V (EXTERNAL), 5V(USB) Digital I/O Pins: 14 (of which 6 provide PWM output)  Analog Input Pins: 6  DC Current per I/O Pin: 40mA  DC Current for 3.3V pin: 50mA  Flash Memory: 32 KB (ATmega328P) of which 0.5KB used by bootloader  SRAM: 2 KB (ATmega328P)  EEPROM: 1 KB (ATmega328P)  Clock Speed: 16 MHZ  USB Chip CH340G Usage Instructions: Click here for the driver software Before connecting the Board to your USB port: 1.     Download the “ch341ser.exe” file and run it. 2.     The software asks whether it can install the CH341SER.INF driver for the CH340 chip. Click INSTALL 3.     A Windows message asks whether the driver has installed correctly. Click YES. 4.     Connect your Board. 5.     From Control Panel, open Device Manager and Ports. If installed correctly you should see an entry “USB-SERIAL CH340 (COMXX) Install Arduino IDE Download Here http://arduino.cc/en/Main/Software Connect Board to Computer and open Arduino IDE. Select board as "Uno"

UNO R3 Development Board For Arduino Compatible with USB Cable This UNO R3 BOARD is a 100% compatible derivative of current R3 Arduino UNO's This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY Delivery Time: 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers: http://arduino.cc/en/Main/Software No need to install any additional driver