Msc digital ac

New Page 1 New Page 1 MASTECH MSC DIGITAL AC CURRENT CLAMP METER WITH TEMPERATURE Description: MASTECH MSC DIGITAL AC CURRENT CLAMP METER WITH TEMPERATURE The Clampmeter comes with a very rugged and accurate CT. The Instrument comes

we only accept Paisapay New Page 1 MASTECH MSC DIGITAL AC CURRENT CLAMP METER WITH TEMPERATURE Description: MASTECH MSC DIGITAL AC CURRENT CLAMP METER WITH TEMPERATURE The Clampmeter comes with a very rugged and accurate CT. The Instrument comes

New Page 1 MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temp DESCRIPTION-:   MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.                 No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use.                                                Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)                    Specification:   DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery  

New Page 1 New Page 1 MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temp Description: MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.                 No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use.                                                Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)                    Specification:   DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery

New Page 1 New Page 1 DESCRIPTION   MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.     No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use. Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)               Specification: DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery

we only accept Paisapay DESCRIPTION   MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.     No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use. Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)               Specification: DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery

New Page 1       BRANDED   MASTECH MSC Digital Multimeter AC/DC Volt Detector with Diode & Temperature Mastech MSC is a manually 19-range fully featured digital multimeter. It is capable of all standard functions including AC/DC Voltage and DC Current, Resistance, diode check, continuity test and temperature (°C & °F selectable).  It uses back-lit LCD display with a maximum reading of . It adopts built-in non-contact AC voltage detector that will detect any AC voltage greater than 90V and send out flash warning.                 No matter you are a professional or just a DIY hobbyist, this is a great and easily affordable tool for your daily use.                                                  Features:   3 1/2 digital Back-lit LCD display with a maximum reading Non-contact AC voltage detector (> 90 V/AC) Temperature measurement (°C & °F selectable) In conformance with international safety standards IEC CAT III 600V Data Hold All range protection Over range indication & batter indication Polarity indication Tilt back stand Diode test Continuity test Non-contact AC Voltage detection (> 90V/AC, LED flash warning)                         Specification:       DC Voltage 200m/2V/20V/200V±V±0.8% AC Voltage 200V±V±1.2% DC Current 200μA±1.0%, 2mA±mA±mA±A±3.0% Resistance k/20k/200k±0.8%, 2MΩ±1.0%   Temperature -20 °C - 0 °C ± °C - 400 °C ± °C - °C ±2.0%   -4 °F - 32 °F ± °F - 752 °F ± °F - °F ±2.0% Sampling rate   3 times per second   Power   9V battery  

we only accept Paisapay New Page 1 DESCRIPTION-: MASTECH MSC Digital Multimeter Type-K Thermocouple Contact AC/DC Tester Detector with Diode Tests voltage, current and resistance Diode check and continuity test Data hold and display back light Type-K thermocouple contact temperature measurement Safety rating up to CAT. II 600V Specifications: DC Voltage: 200m/2V/20V/200V¡ÀV¡À0.8% AC Voltage: 200V¡ÀV¡À1.2% DC Current: 200¦ÌA¡À1.0%, 2mA¡ÀmA¡ÀmA¡ÀA¡À3.0% Resistance: k/20k/200k¡À0.8%, 2M¦¸¡À1.0% Temperature: -20 to 0 Centigrade ¡À to 400 Centigrade ¡À to Centigrade ¡À2.0%/-4 to 32 Fahrenheit ¡À to 752 Fahrenheit ¡À to Fahrenheit ¡À2.0% Sampling rate: 3 times per second Power Supply: 9V battery (not included) SKU: X1IN Package includes: 1 * MSC Digital Multimeter (with 1 set test leads) 1 * User Manual We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1   MASTECH MSC Digital Multimeter Type-K Thermocouple Contact AC/DC Tester Dete

we only accept Paisapay New Page 1 MASTECH DIGITAL AC / DC AMP CLAMP METER MS TEMPERATURE Description: MASTECH MS AC/DC DIGTAL CLAMP METER TEMP FREQUENCY This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features: Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9% Power: 6F22 9V Battery (Not included) Item size: cm Item weight: 414g Package size: cm   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 MASTECH DIGITAL AC / DC AMP CLAMP METER MS TEMPERATURE Description: MASTECH MS AC/DC DIGTAL CLAMP METER TEMP FREQUENCY This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features: Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9% Power: 6F22 9V Battery (Not included) Item size: cm Item weight: 414g Package size: cm   We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us

New Page 1 New Page 1 NEW MASTECH DIGITAL AC / DC AMP CLAMP METER MS TEMPERATURE FREQUENCY Description: MS This clamp meter allows properties of the electrical current test, like measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. Features:   Professional AC/DC digital clamp meter. It is designed according to IEC and IEC concerning safety requirements. Use for measure AC/DC current, AC/DC voltage, resistance, capacitance,temperature, frequency,diode and circuit, etc. When measure DCA, the display can automatically reture to zreo. When measure AC voltage, it can measure the voltage's frequency. Continuity test, can test the circuit to be on or off. With a LCD display to show datas. Data can be hold. Display is counts. Safe and professional. Data hold & Zero adjustment Carrying case for travel Specifications: Display: counts DCV: V+/-V+/-1.0% ACV: V+/-V+/-1.2% DCA: A+/-3.0% ACA: A+/-3.0% Resistance: k/40k/400k/4Mω+/-Mω+/-2.0% CAP: 4n/40n/400n/4uF+/-4.0% Frequency: 40Hz to 100kHz +/-2.0% Temperature: -40°C to 750°C+/-1.0% Duty cycle: 0.1% to 99.9% Power: 6F22 9V Battery   What's

New Page 1            MASTECH M266 DIGITAL AC CLAMP METER CLIP-ON-METER The AC digital clamp meter is a professional clamp meter with function of measuring AC voltage,DC voltage,AC current,Resistance and Continuity check with battery operated Specification M266 DC Voltage V ± 0.8% AC Voltage  750V ± 1.2% AC Current  200A ± A ± 3% Resistance KΩ ±1 .0% Continuity check  Built in buzzer will sound Data hold Provided LCD size  mm Dimension mm Weight 310g

DESCRIPTION   MASTECH M266 DIGITAL AC CLAMP METER CLIP-ON-METER The AC digital clamp meter is a professional clamp meter with function of measuring AC voltage,DC voltage,AC current,Resistance and Continuity check with battery operated Specification M266 DC Voltage V ± 0.8% AC Voltage  750V ± 1.2% AC Current  200A ± A ± 3% Resistance KΩ ±1 .0% Continuity check  Built in buzzer will sound Data hold Provided LCD size  mm Dimension mm Weight 310g

we only accept Paisapay New Page 1 M266 MASTECH M266 DIGITAL AC CLAMP METER Description: Mastech M92A Digital Multi Meter Display: 26 x 61 mm LCD DC voltage: 200mV/V ± 8%   AC voltage: V ± V ± 2%   DC current: m/20mA ± m/2A ± 2%, 10A   AC current: 2m/20mA ± m/2A ± 8%, 10A   Resistance: K/20K/200K/2M Ohm ± 8%, 20M   Continuity checking with buzzer   Diode check: Test current 0.8mA, test voltage 2.5V   HFE:   Power source: 6F22(9V) x 1   Size weight: 85 x 165 x 32 mm, 250g (including battery)   Display: 26 x 61 mm LCD We only accept Paisapay. The items will be shipped by Reputed Courier after the payment clear. The delivery period is between days. Please be patient for the parcel and don't leave a bad comment for the shipping time. Please make sure the "Ship To" address you enter during checkout is correct as we are not responsible for wrong or undeliverable addresses. We require a verified shipping address for shipment of your items. We can exchange returned items for you if there is a problem with an item. Every item we offer is backed by a 100% satisfaction guarantee. If your item is not correct or you don't like it for any reason, contact us immediately for return instructions and we will make it right for you. Items must be shipped to us