Poe injector s

Important: ---- Please Read Below full details before placing the order. No Refunds / No Returns D I G I A N A Offers   OEM Replacement POE Injector with LED &   12V DC 1A   Power Adapter  (3 Pin)  POWERFUL HEAVY DUTY COMBINATION OF  POE &  12Volt ADAPTER  OF 1A RATING WITH NORMAL PIN   DIGIANA  CPE-14GN  compatible adopter is "9Volt 1Amp" Substitute for OEM or Branded 'POE-v PoE The OEM Replacement  Passive PoE Injector with LED power-over-Ethernet injectors are used to put dc power into a LAN cable to power remote equipment. The injector comes

Features PoE Injector CA-PE100I allows you to pass electrical power along with the data on Ethernet cabling. It gives you cost effective and compact solution for power distribution to your PoE devices. - 1 Port PSE/ PoE function, 48V output  - Supporting the power up to 18W on PSE/PoE port - Providing Mbps switching ports - Complying with IEEE Base-T, IEEE u 100Base-TX - Filtering/Forwarding Rate: 100Mbps/pps; 10Mbps/pps - Mix Ethernet and power into RJ-45 port - IEEEaf Compliance - Smart plug & play Standards IEEE Base-T, IEEE u 100Base-TX, IEEE af PoE Features Number of Ports:  1 x RJ45 connector: Data input port 1* RJ45 connector: Data + power output port Filtering/Forwarding Rates 100Mbps port – pps 10Mbps port – pps Transmission Media 10BaseT Cat. UTP/STP 100BaseTX Cat. 5, 6 UTP/STP LED Indicators Power Power Input DC 48V Power Output 48V Per Port Output – 18 W Max on POE Port Power Consumption 2 Watts Dimensions mm (L x W x H) Weight 138g Operating Temperature 0° to 50° C Storage Temperature -20° to 90° C Humidity 10 to 90% RH (non-condensing) Certifications FCC Class A, CE

Features Gigabit PoE Injector CA-PEI allows you to pass electrical power along with the data on Ethernet cabling. It gives you cost effective and compact solution for power distribution to your PoE devices. - 1 Port PSE/ PoE function, 48V output - Supporting the power up to 18W on PSE/PoE port - Providing Mbps switching ports - Complying with IEEE Base-T, IEEE u 100Base-TX and IEEEab Base-T - Filtering/Forwarding Rate: Mbps/pps;100Mbps/pps; 10Mbps/pps - Mix Ethernet and power into RJ-45 port - IEEE af Compliance - Smart plug & play Standards IEEE af PoE Features Number of Ports:  1 x RJ45 connector: Data input port 1* RJ45 connector: Data + power output port Filtering/Forwarding Rates Mbps port – pps 100Mbps port – pps 10Mbps port – pps Transmission Media 10BaseT Cat. UTP/STP 100BaseTX Cat. 5, 6 UTP/STP LED Indicators Power Power Input DC 48V Power Output 48V Per Port Output – 18 W Max on POE Port Power Consumption 2 Watts Dimensions mm (L x W x H) Weight 138g Operating Temperature 0° to 50° C Storage Temperature -20° to 90° C Humidity 10 to 90% RH (non-condensing) Certifications FCC Class A, CE

Product has been used carefully. One can check and collect from our place in Vasna, Ahmedabad

PoE Splitter Adapter IEEE af Compliant M For All 12V devices. The PoE Splitter Adapter is IEEE af compliant. The Passive Power over Ethernet Set included two pieces: The INJECTOR and SPLITTER. The kit is commonly fitted to support products that do not have support of Power over Ethernet. The kit can be used with any wide range network products which might include Routers Access Points IP Cameras switches etc. (The power adapter is not included).

D I G I A N A Offers   OEM Replacement POE Injector with LED &  Operate on 5V / 9V / 12V / 18V / 24Volts DC  (May be  also for 48VDC)  Max. 2Amp Current MOST POWERFUL HEAVY DUTY COMBINATION OF  POE with LED  Substitute for OEM or Branded 'POE-12' / EBU- Passive POE The OEM Replacement  Passive PoE Injector with LED power-over-Ethernet injectors are used to put dc power into a LAN cable to power remote equipment. The injector comes

RBPOE Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and

Overview PoE splitter is an economical and practical PoE remote power equipment base on IEEE802.3af standard.It can separate the power and data via cable transmission and proper matching use with PoE switch or PSE injector which meet standard IEEE802.3af, Provides power and data at the same time for the terminal device does not support PoE.PoE splitter, output voltage of 12V use with the power supply equipment, It helps to expand wireless city, Security monitoring and other PoE practical place, and is not restricted by layout of power line.Specifications Support international standard IEEE802.3 af(12W);POE port Support 10/100Mbps data transmissionPD support 36V-58V voltage transmission, Automatically detects power supply from PSE power supply module12V power output, easy to access Poe. Order in bulk. What are you waiting for.... Click on the link below.. https://www.ictcircle.com/categories/networking/pro duct/64427/active-waterproof-poe-splitter-12v-12a-output-iee e-8023af-standard-compliant-10100mbps-power-over-ethernet-sp litter-outdoor-use

Available Cisco 3850 12X48U- S 48 port Gigabit + Poe , 12 port Ethernet 10 Gigabit Switch + 2 port 10 Gigabit sfp + 2 port 1 Gigabit Sfp. Contact Tabeen 98214 73978

SM offers Used Cisco Router,Switches, Firewall, VOIP, Modules, cards Cables etc at competitive prices LAB Kits for CCIE,CCNP,CCNA R&S, SEC, Voice Cisco Routers Series – Series - Series – XM, XM, XM, XM Series – Series- Series - Cisco Switches Series – Series – P, 48P, POE, SMI,EMI Series – P, 48P,TS,PS, G Series – P, 48P,TS,PS, G Interface & Network Module Security, Voice & Wireless Devices Contact: Suresh SM NETWORKS Mobile - , ,011- Email- G19,Hemkunt Chamber, 89, Nehru Place,New Delhi

WS-C3560X-24P-E data sheet Manufacturer Cisco Systems, Inc Manufacturer Part Number WS-C3560X-24P-E Product Type Switch - 24 ports - L3 - Managed Form Factor Rack mountable - 1U Switch Ports 24 x 10/100/1000 Ethernet POE+ Ports Performance Switching capacity : 160 Gbps Routing Protocol RIP-1, RIP-2, HSRP, BLGP, VRRP, EIGRP, OSPF, BGP, PIM Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+ Features Hot swap module replacement, Layer 3 switching, Layer 2 switching, dynamic IP address assignment , DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), EIGRP, BGP, OSPF, PIM, IPv4/IPv6 Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae DRAM Memory 256 MB Flash Memory 64 MB Flash Status Indicators Port status, link activity, port transmission speed, port duplex mode, power, system Connectivity Slots Interfaces 24 x 10Base-T/100Base-TX/1000Base-T - RJ-45 USB : 1 x 4 PIN USB Type A 1 x console - mini-USB Type B - management 1 x RS-232 - RJ-45 - management 1 x 10Base-T/100Base-TX - RJ-45 - management Expansion Slot(s) 1 (total) / 1 (free) x Expansion Slot Power Supply Power Device Power supply - redundant - plug-in module Installed Qty 1 (installed) / 2 (max) Power Redundancy Optional Power Redundancy Scheme 1+1 (with optional power supply) Voltage Required AC 120/230 V ( 50/60 Hz ) Features Redundant Power System (RPS) connector Dimensions / Weight / Miscellaneous Width 44.5 cm Depth 46 cm Height 4.5 cm Weight 7 kg Rack Mounting Kit Optional MTBF 208,218 hour(s) Compliant Standards CE, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1 System Software Software Included Cisco IOS IP Service

Brand: FEDUS Color: Black Features: ►EASY CONNECTION - FEDUS CAT8 Ethernet extender cable helps you to extend your original ethernet connection to a router or modem, instead of purchasing another longer cable. Being male to female ethernet cable, Protect computers, laptop, TV network ports from constant plug and unplug, extension is easy to use when extending wired connection in small space and short distance also Provides a spare network patch cable for testing or temporary connections in a conference room or classroom ►HIGH-SPEED TRANSMISSION - This network cat 8 cable supports bandwidth up to 2000MHz and boosts the speed of data transmission up to 40Gbps. Also backward compatible with Cat7, Cat6a, Cat6, Cat5e, Cat5 ethernet cable. so you can connect to your LAN/WAN segments and networking gear at maximum speeds and surf the Internet, streaming videos, music, online gaming, cloud computing and other data at high speed and you don’t have to worry about cables causing a mess ►COMPATIBILITY AND APPLICATION - Can be Used for connecting UTP, FTP, STP Ethernet cable, backward compatible with Cat7, Cat6a, Cat6, Cat5e, Cat5 cable, Category 8 RJ45 8P8C Ethernet Patch Cable Extender provides universal connectivity for Gigabit Ethernet Local Area Network (LAN) networking equipment components such as PC desktop, laptop, computer server, smart TV, network printer, cable modem, router, switch, hub, adapter, network media players, xBox, PS2, PS3, PS4, NAS, VoIP, PoE and more ►BUILT TO LAST - 8P8C RJ45 Gold-plated connector is resistant to oxidation and corrosion, the high-stretch outer jacket is made of environmentally friendly flame-retardant material survive different environment, easy to install outdoor and indoor also has superior flexibility and durability. Pure copper Shielded/Foiled Twisted Pair(SSTP/SFTP) conductor, ensuring a more stable signal transmission, The bending test proves that this internet cable can be bent at least 10000 times without broken ►RELIABLE STABILITY - Compared to Cat7/Cat6a/Cat6/Cat5e network ethernet cable, the CAT 8 additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality of transmitting speed, CAT8 the conductor of ethernet cable uses 100% oxygen-free copper inside, built STP inside new environment protection material and the latest technology, faster, thinner, more stability, durable than CAT7 & CAT6 ▶6 MONTHS REPLACEMENT WARRANTY – 6 Months manufacturer warranty and product support provide peace of mind when purchasing, Each patch Cord goes through rigorous testing to ensure a secure wired connection If for any reason you are not satisfied with the item, you will get a replacementhttps://www.fedus.in/products/cat8-ethernet-extension-cable-1-meter-rj45-shielded-male-to-female-lan-cord-black

CISCO SWITCH WS-CPS-S  ,  IN PERFECT WORKING CONDITIONS WS-CPS-S ●    48 Ethernet ports and 4 SFP-based Gigabit Ethernet ports ●    1RU fixed-configuration, multilayer switch ●    Enterprise-class intelligent services delivered to the network edge ●    IEEE af and Cisco prestandard Power over Ethernet ●    IP Base software feature set (IPB)

USED Cisco WS-CG-24PS-S Switch TESTED IN EXCELLENT CONDITION   Catalyst G 24POE SFP;1RU Product Condition used Included Items 1 X Cisco WS-CG-24PS-S 1U Switch       PRODUCT INCLUDES RACK MOUNT KIT  CONSOLE AND POWER CORD CONTACT ME ON   or

RJ45 POE CABLE   Description   POE Cable Kit The complete Passive Power over Ethernet Kit contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100- 130 ft (the real distance depends on the power supply, type of cable and powered device).   Contains: INJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link,   Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection. Power Connector Barrel size is 2.1mm (5.5 x 2.1 mm) Power Pins 4,5 + and 7,8 -   Included: 1 x Power Over Ethernet Passive POE Injector Splitter Adapter Cable Kit