Ethernet injector

RBPOE Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and

Features PoE Injector CA-PE100I allows you to pass electrical power along with the data on Ethernet cabling. It gives you cost effective and compact solution for power distribution to your PoE devices. - 1 Port PSE/ PoE function, 48V output  - Supporting the power up to 18W on PSE/PoE port - Providing Mbps switching ports - Complying with IEEE Base-T, IEEE u 100Base-TX - Filtering/Forwarding Rate: 100Mbps/pps; 10Mbps/pps - Mix Ethernet and power into RJ-45 port - IEEEaf Compliance - Smart plug & play Standards IEEE Base-T, IEEE u 100Base-TX, IEEE af PoE Features Number of Ports:  1 x RJ45 connector: Data input port 1* RJ45 connector: Data + power output port Filtering/Forwarding Rates 100Mbps port – pps 10Mbps port – pps Transmission Media 10BaseT Cat. UTP/STP 100BaseTX Cat. 5, 6 UTP/STP LED Indicators Power Power Input DC 48V Power Output 48V Per Port Output – 18 W Max on POE Port Power Consumption 2 Watts Dimensions mm (L x W x H) Weight 138g Operating Temperature 0° to 50° C Storage Temperature -20° to 90° C Humidity 10 to 90% RH (non-condensing) Certifications FCC Class A, CE

Features Gigabit PoE Injector CA-PEI allows you to pass electrical power along with the data on Ethernet cabling. It gives you cost effective and compact solution for power distribution to your PoE devices. - 1 Port PSE/ PoE function, 48V output - Supporting the power up to 18W on PSE/PoE port - Providing Mbps switching ports - Complying with IEEE Base-T, IEEE u 100Base-TX and IEEEab Base-T - Filtering/Forwarding Rate: Mbps/pps;100Mbps/pps; 10Mbps/pps - Mix Ethernet and power into RJ-45 port - IEEE af Compliance - Smart plug & play Standards IEEE af PoE Features Number of Ports:  1 x RJ45 connector: Data input port 1* RJ45 connector: Data + power output port Filtering/Forwarding Rates Mbps port – pps 100Mbps port – pps 10Mbps port – pps Transmission Media 10BaseT Cat. UTP/STP 100BaseTX Cat. 5, 6 UTP/STP LED Indicators Power Power Input DC 48V Power Output 48V Per Port Output – 18 W Max on POE Port Power Consumption 2 Watts Dimensions mm (L x W x H) Weight 138g Operating Temperature 0° to 50° C Storage Temperature -20° to 90° C Humidity 10 to 90% RH (non-condensing) Certifications FCC Class A, CE

RJ45 POE CABLE   Description   POE Cable Kit The complete Passive Power over Ethernet Kit contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100- 130 ft (the real distance depends on the power supply, type of cable and powered device).   Contains: INJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link,   Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection. Power Connector Barrel size is 2.1mm (5.5 x 2.1 mm) Power Pins 4,5 + and 7,8 -   Included: 1 x Power Over Ethernet Passive POE Injector Splitter Adapter Cable Kit

PoE Splitter Adapter IEEE af Compliant M For All 12V devices. The PoE Splitter Adapter is IEEE af compliant. The Passive Power over Ethernet Set included two pieces: The INJECTOR and SPLITTER. The kit is commonly fitted to support products that do not have support of Power over Ethernet. The kit can be used with any wide range network products which might include Routers Access Points IP Cameras switches etc. (The power adapter is not included).