Programmable logic controller

DSPIC33EP128GM604 microchip MCU controller brand new warranty 16K RAM & 128K mem + TQFP to DIP Adapter PCB Board Specs Package - 1 MCU + 1 Adapter This is a Double-Side PCB Circuit Board.  A side for pin pitch size 0.8mm,It can be used for most of the TQFP (compatible with 32pin~64pin) to 2.54mm DIP. B side for pin pitch size 0.5mm,It can be used for most of the TQFP (compatible with 32pin~100pin) to 2.54mm DIP. Features Operating Conditions 3.0V to 3.6V, -40°C to +85°C, up to 70 MIPS 3.0V to 3.6V, -40°C to +125°C, up to 60 MIPS  Core: 16-Bit dsPIC33E CPU Code-Efficient (C and Assembly) Architecture Two 40-Bit Wide Accumulators Single-Cycle (MAC/MPY) with Dual Data Fetch Single-Cycle Mixed-Sign MUL plus Hardware Divide 32-Bit Multiply Support  High-Speed PWM Up to 12 PWM Outputs (six generators) Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources Dead Time for Rising and Falling Edges 7.14 ns PWM Resolution PWM Support for:  DC/DC, AC/DC, Inverters, PFC, Lighting BLDC, PMSM, ACIM, SRM Programmable Fault Inputs Flexible Trigger Configurations for ADC Conversions Supports PWM Lock, PWM Output Chopping and Dynamic Phase Shifting  Advanced Analog Features Two Independent ADC modules: Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H or 49 analog inputs Flexible and Independent ADC Trigger Sources Up to Four Op Amp/Comparators with Direct Connection to the ADC module: Additional dedicated comparator Programmable references with 32 voltage points Programmable blanking and filtering Charge Time Measurement Unit (CTMU): Supports mTouch™ capacitive touch sensing Provides high-resolution time measurement (1 ns) On-chip temperature measurement  Timers/Output Compare/Input Capture 21 General Purpose Timers: Nine 16-bit and up to four 32-bit timers/counters Eight output capture modules configurable as timers/counters PTG module with two configurable timers/counters Two 32-bit Quadrature Encoder Interface (QEI) modules configurable as a timer/counter Eight Input Capture modules Peripheral Pin Select (PPS) to allow Function Remap Peripheral Trigger Generator (PTG) for Scheduling Complex Sequences  Communication Interfaces Four Enhanced Addressable UART modules (17.5 Mbps): With support for LIN/J protocols and IrDA® Three 3-Wire/4-Wire SPI modules (15 Mbps) 25 Mbps Data Rate for Dedicated SPI module (with no PPS) Two I2C™ modules (up to 1 Mbps) with SMBus Support Two CAN modules (1 Mbps) CAN 2.0B Support Programmable Cyclic Redundancy Check (CRC) Codec Interface module (DCI) with I2S Support  Direct Memory Access (DMA) 4-Channel DMA with User-Selectable Priority Arbitration Peripherals Supported by the DMA Controller include: UART, SPI, ADC, CAN and input capture Output compare and timers

Lsi Logic SYMU/SYM Bit Pci Scsi Controller Lvd/se ITEM DESCRIPTION - Manufacturer: Lsi Logic - Part Number: SYMU/SYM - Description: 64 Bit Pci Scsi Controller Lvd/se - Condition: Refurbished WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES CONTACT: EMAIL:

Lsi Logic SYMU/SYM Bit Pci Scsi Controller Lvd/se ITEM DESCRIPTION - Manufacturer: Lsi Logic - Part Number: SYMU/SYM - Description: 64 Bit Pci Scsi Controller Lvd/se - Condition: Refurbished WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES

Seal pack 1 quantity only **Not used new condition** ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier is mostly used for microcontrollers project which needs an analog-to-digital converter or when you want a higher-precision ADC. ADS1115 16-Bit ADC- provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-end input channels or two differential channels. Additionally, ADC also includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and it’s super easy to use. It is a great general-purpose 16-bit converter. The ADS1115 chip is fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115’s connect on a single 2-wire I2C bus for 16 single end inputs.

Description L298N is a kind of high voltage, high current motor driver chip produced by ST company. Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V), large output current(instantaneous peak current up to 3A, continuous working current 2A) and 25W of rated power. Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage. The chip can connects to external detecting resistor to give the variations to the control circuit. Using L298N chip to drive the motor, this chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Features： Using L298N made by ST company as the control chip,the module has such characteristics as strong driving  ability, low calorific value and strong anti-interference ability. This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage  of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage. Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability Specification Double H bridge drive Chip L298N (ST NEW) Logical voltage 5V Drive voltage 5V-35V Logical current 0mA-36mA Drive current 2A(MAX single bridge) Storage temperature -20 to +135 Max power 25W Weight 30g Size:mm Applied cases: 1) Driving stepper motor The connection of driving a common 4 line 2 phase electric motor is shown

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

LSI LOGIC LSI DUAL CHANNEL SCSI CONTROLLER CARD FULLY TESTED AND FUNCTIONAL WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES CONTACT: EMAIL:

Buy with confidence. Customer Satisfaction is our Priority | Product Description Case Logic - Candy Beat Micro Earphones + Mic Controller (Answer Switch) | Colour: Blue -High Performance Sound -Heavy Bass -Sweat Proof Design -Custom-fit Earpiece -Once Touch Call / Mic Controller Specifications: -Drive unit: 10mm -Frequency response: Khz -Inpedance: 16 Ohms -Sensitivity: 98+-3Dv -Distortion: -Rated Power: 1mW -Max Power Input: 5mW -Cord Length: 1.2m -Plug: 3.5mm Stereo -Microphone Size: 4*1.5mm -Microphone Sensitivity: -42 +/- 3db Seller Policies: -Shipping only through " Powership" i.e. recognized logistics partners like Blue Dart or DTDC or Fedex as provided by -Fast shipping i.e. Dispatch within 1-2 days -Customer satisfaction is out top most priority. Feel free to contact us. -INCASE OF ANY ISSUES OR CONCERNS - CONTACT US / Do Not Leave Negative Feedback, we will try to resolve your matter   -Call us on or write to us at any time

HP Ultra320-SCSI Controller Card 64bit PCI-X SCSI PN: LSI-R Ultra320 SCSI Single-Channel Host Adapter LSI/HP PCI-X 133 SCSI Controller w/LED Cable , LSILP-HP, LSI-HP Manufacturer: LSI Logic/HP Part Numbers: , LSILP-HP, LSI-HP Mobile No. , .

Symbios LSI Logic SYMU Ultra2 SCSI Host Bus Adapter 100 % WORKING TESTED WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES CONTACT: EMAIL:

Symbios LSI Logic SYMU Ultra2 SCSI Host Bus Adapter 100 % WORKING TESTED WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES SCSI,FIBER, COMPUTER RELATED CABLES SUN PRODUCTS EMC PRODUCTS STORAGES TAPE DRIVES, LIBRARIES CONTACT: EMAIL: SENTHILKUMAR

Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC   Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V   Driven part of the peak current Io: 2A   The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)   The logical part of the operating current range: 0 ~ 36mA   Storage temperature: -25 Deg C ~ +130 Deg C   Other Extensions: control of direction indicators, the logic part of the plate to take power interface.Driver Board Size: 55mm * 60mm * 30mm   Drive plate Weight: 33g   Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.

Symbios LSI Logic SYM8951U Ultra2 SCSI Host Bus Adapter 100 % WORKING TESTED We are dealing old server,spare parts, desktops,laptops & services scsi, fiber, computer related cables sun products, emc products storages tape drivers, libraries. CONTACT: 9840889242 EMAIL: info@hitechcomputers.in

3 Channel Infra-Red Remote receiver Module is compatible with latest sony TV remote, comes with relay board.       Supply 12V DC @ 160mA (All Relay On)     3 Channel Latch or momentary output     Easy programmable and user defined outputs     Latch and Momentary programmable     On board tact switch for learning     Remote unit is not included

AAA battery support Time Technical Specifications Input voltage: VAC Frequency Hz Contact: Single Pole - Single Throw 16 A, 250 V AC or  20 A, 30V DC Running Accuracy: ± 1 second / day at 20°C Minimum Time Setting: 1 minute Load - Resistive 16A, Inductive 8A, Motor 2H