Pwm dc

PWM DC 6V 12V 24V 28V 3A Motor Speed Control Switch Controller Regulator This DC Motor Speed Controller allows controlling the speed of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from %.  The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC load.  Input supply voltage: 5V-30VDC  The maximum output power: 80W  The maximum continuous output current: 3A  Duty Cycle adjustable: %  Operating instruction:  1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram.  2. Connect a voltage of 5V-30V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply

3A Pulse Width PWM DC Motor Speed Regulator Controller Switch 12V/24V/36V Specifications Control the speed of a DC motor with this controller. Control the light of a lamp with this controller. High efficiency, high torque, high power, high heat dissipation. With overcurrent protection. The high quality COMBICON improve the stability of circuit. Input voltage: DC12V - 36V Sustained current:3A,max.6A(Need to add a cooling fan when max. current) PWM Duty Cycle:% Material: Plastic, metal Size (L*W*H):55mm*35mm*21mm To connect the DC power supply:ensure the power supply voltage 12V - 36V, ensure the power supply output power meet the requirements of the motor work.Dc power don't reverse the positive and negative terminals, otherwise the governor may damage; Line connecting motor: the motor can be both positive and negative, when running direction and expectations are not consistent, can adjust the line sequence by position or to change the direction; Adjust potentiometer knob: adjust potentiometer knob can change speed output duty cycle, motor speed change. Package includes PWM DC Motor Speed Regulator Controller Switch x 1 Images Click here to check out our other products

DC 12V-40V Large Torque PWM Motor Speed Controller Reversible Control Switch Specifications High Power, High efficiency, Large torque The motor speed controller incorporates a high power MOSFET with a heat sink and can easily provide a continuous current of 3A to your DC motor or other DC load With switch function and Reversible Control function Onboard 10A fuse, with reverse power, over voltage, high current protection function Mode:CCM2NJ Input supply voltage:VDC(max) Maximum output power:120W rated current: 3A Maximum continuous output protecting current:5A PWM frequency: 15kHz Duty Cycle adjustable:% Indicator: Power-On LED Size: 70x39x31mm/2.75"x1.53"x1.22"(approx) Color: as the picture show Package includes 1 x PWM DC Reversible Motor Speed Controller Images Click here to check out our other products

DC PWM V Motor Speed Control 10A Pulse Width Modulator Controller Switch Features Power requirement:V Rated current:10A(Maximum output current) PWM Frequency:HZ Control Motor Power:12V:120W(max),24V:230W(max) Regulation range:% The Pulse type is 10A,High-current protection,or Short-circuit current protection Dimension:80mm x 30mm x 55mm(about) Quantity:1PC Package includes 1 x PWM DC Motor speed controller Images Click here to check out our other products

PWM 12V DC Motor Speed Controller DESCRIPTION - Power Supply Require 9V to 24 VDC - PWM Duty Cycle: %. - Current: Rated Current: Max 5A with heat sink - Board was tested before shipping to you. - Can be use to control the speed of Motor Or as LED Dimmer - Quantity: 1 pc - Color: As the picture show - 100% Made In India:) Welcome to ask any question Mob-, Email Your feedback is important for us to grow our business on , so please  leave Positive feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback

PWM 12V DC Motor Speed Controller DESCRIPTION - Power Supply Require 9V to 24 VDC - Frequency：25KHz. - PWM Duty Cycle: %. - The maximum current up to 5A radiator or heat required - Board was tested before shipping to you. - Can be use to control the speed of Motor Or as LED Dimmer - Quantity: 1 pc - Color: As the picture show - 100% Made In India:) Welcome to ask any question Mob-, Email Your feedback is important for us to grow our business on , so please  leave Positive feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback

PWM 12V/24V DC Motor Speed Controller DESCRIPTION - Power Supply Require 9V to 24 VDC - Frequency：25KHz. - PWM Duty Cycle: %. - The maximum current up to 5A radiator or heat required - Board was tested before shipping to you. - Can be use to control the speed of Motor Or as LED Dimmer - Quantity: 1 pc - Color: As the picture show - 100% Made In India:) Welcome to ask any question Mob-, Email Your feedback is important for us to grow our business on , so please  leave Positive feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback

20A Universal DCV PWM HHO RC Motor Speed Regulator Controller Switch Features Operating voltage: DC 10V-60V Output Current: 0 to 20A. Frequency：25KHz. Continuous power: Max W Speed range: Motor zero speed to maximum motor speed The maximum current up to 20A radiator or heat required to increase the fan Material: Plastic, metal Size (L*W*H):76mm*44mm*26mm Package includes PWM DC Motor Speed Regulator Controller Switch x 1 Images Click here to check out our other products

12V-60V 24V 36VStepless PWM 15khz Variable Fan Motor Speed Controller Switch DC Specifications Power input reverse polarity protection, reverse the positive and negative inputs are not damaged, detachable potentiometer connected to the host via a freely plug cable Dimensions: 70 x 39 x 31 mm Operating voltage: DC 12V-60V Output current: 10A Max. (full power, long-term working) Control power: W Quiescent Current: 0.02A (standby) PWM duty cycle: 5% -99% PWM frequency: 15khz Input Anti-reverse Protection: Yes Package includes DC Motor Speed Controller x 1 Images Click here to check out our other products

http://laptops-fan.com/new-delta-tfc1212de-120mm-12cm-pwm-252cfm-12038-dc-12v-fan-p-17067.html New Delta TFC1212DE 120mm 12cm PWM 252CFM 12038 DC 12V fan Compatible with Part No.: For Delta TFC1212DE 120mm 12cm PWM 252CFM 12038 DC 12V Series laptops Condition: 100% high quality Warranty: 3 months

DESCRIPTION Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for Arduino 1. L298N as main chip, ST corporation production. 2. Low heat,outstanding anti-interference performance. 3. High working power to 46v,large current can reach 3A MAX and continue current is 2A, power 25w. 4. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. 5. Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply. 6. Large capacity filter capacitance,afterflow protection diode, more stable and reliable. o Specifications: 2. Double H bridge drive 3. Chip: L298N (ST NEW) 4. Logical voltage: 5V 5. Drive voltage: 5V-35V 6. Logical current: 0mA-36mA 7. Drive current: 2A(MAX single bridge) 8. Size:43 x 43 x 26mm 9. Max power: 25W 10. Net weight: 25g Uses: 11. Driving stepper motor: The connection of driving a common 4 line 2 phase electric motor is shown in figure after enable ENA ENB Input the following driving timing from IN1-IN4-then the speed and direction of the stepper motor can be controlled. 12. Driving DC motor: Because this module is driven by double H bridge,it can drive two motors simultaneously. after enable ENA ENB You can input the speed and direction of PWM signal drive motor 1 from IN1 IN2 You can input the speed and direction of PWM signal drive motor 2 from IN1 IN2 We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

10A PWM Solar Panel Battery Regulator Charge Controller 12V 24V Auto Switch Features         10A Solar Panel Battery Regulator Charge Controller     Electronic protection     Fully automatic operation     PWM charge mode(SOC)     Micro-controller digital accuracy     Suitable for all V DC lamps     Big terminals,big distance between terminals SOLAR CHARGE CONTROLLER    1. SAFETY  Full consideration to the safety of persons and property has been given when designing the products. However the incorrect connection may cause the system breakdown or even safety accident. For your  safety and benefits, the following rules must be complied during the operation. Installation of this product shall be tinder the guidance of the professionals

Solar charge controller new piece 10 left only Features: Micro controller digital accuracy. PWM charge mode. State of charge Detects day and night using the PV array. Suitable for all V DC lamps Fully automatic operation Manual test capability Temperature compensation 16 field adjustable lighting & timer control options Electronic protection.

L293D Arduino multi-motor control shield for arduino UNO Compatible with UNO, Mega, Diecimila & Duemilanove Product Summary:   ·         The shield contains two L293D motor drivers and one 74HC595 shift register. ·         The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. ·         The output enable of the L293D is directly connected to PWM outputs of the Arduino. ·         The Motor Shield is able to drive 2 servo motors, and has 8 half-bridge outputs for 2 stepper motors or 4 full H-bridge motor outputs or 8 half-bridge drivers, or a combination.   Description: ·         2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  ·         Up to 4 bi-directional DC motors with individual 8-bit speed selection (about 0.5% resolution)  ·         Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.  ·         4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V  ·         Pull down resistors keep motors disabled during power-up  ·         Big terminal block connectors to easily hook up wires (AWG) and power  ·         Arduino reset button brought up top ·         2-pin terminal block to connect external power, for seperate logic/motor supplies  ·         compatible with UNO,Mega, Diecimila, & Duemilanove ·         Dimensions: 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in)   Package Include: ·         1pc. L293D Arduino multi-motor control shield Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Product Description:   Input voltage requirement: VDC  Rated current: 60A(Maximum output current)  Frequency: Hz  Control Motor Power: W, 12V: 720W(max),24V:W(max)  36V: W(max),50V:W(max) Standby current: 0.04A Regulation range:%  PCB Size:122x87x32mm  If you need 40 Amps PWM Motor controller please click on this link:  Link If you need more than 1 quantity kindly call us/email us for discount rates Mobile: email:

DSPIC33EP128GM604 microchip MCU controller brand new warranty 16K RAM & 128K mem + TQFP to DIP Adapter PCB Board Specs Package - 1 MCU + 1 Adapter This is a Double-Side PCB Circuit Board.  A side for pin pitch size 0.8mm,It can be used for most of the TQFP (compatible with 32pin~64pin) to 2.54mm DIP. B side for pin pitch size 0.5mm,It can be used for most of the TQFP (compatible with 32pin~100pin) to 2.54mm DIP. Features Operating Conditions 3.0V to 3.6V, -40°C to +85°C, up to 70 MIPS 3.0V to 3.6V, -40°C to +125°C, up to 60 MIPS  Core: 16-Bit dsPIC33E CPU Code-Efficient (C and Assembly) Architecture Two 40-Bit Wide Accumulators Single-Cycle (MAC/MPY) with Dual Data Fetch Single-Cycle Mixed-Sign MUL plus Hardware Divide 32-Bit Multiply Support  High-Speed PWM Up to 12 PWM Outputs (six generators) Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources Dead Time for Rising and Falling Edges 7.14 ns PWM Resolution PWM Support for:  DC/DC, AC/DC, Inverters, PFC, Lighting BLDC, PMSM, ACIM, SRM Programmable Fault Inputs Flexible Trigger Configurations for ADC Conversions Supports PWM Lock, PWM Output Chopping and Dynamic Phase Shifting  Advanced Analog Features Two Independent ADC modules: Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H or 49 analog inputs Flexible and Independent ADC Trigger Sources Up to Four Op Amp/Comparators with Direct Connection to the ADC module: Additional dedicated comparator Programmable references with 32 voltage points Programmable blanking and filtering Charge Time Measurement Unit (CTMU): Supports mTouch™ capacitive touch sensing Provides high-resolution time measurement (1 ns) On-chip temperature measurement  Timers/Output Compare/Input Capture 21 General Purpose Timers: Nine 16-bit and up to four 32-bit timers/counters Eight output capture modules configurable as timers/counters PTG module with two configurable timers/counters Two 32-bit Quadrature Encoder Interface (QEI) modules configurable as a timer/counter Eight Input Capture modules Peripheral Pin Select (PPS) to allow Function Remap Peripheral Trigger Generator (PTG) for Scheduling Complex Sequences  Communication Interfaces Four Enhanced Addressable UART modules (17.5 Mbps): With support for LIN/J protocols and IrDA® Three 3-Wire/4-Wire SPI modules (15 Mbps) 25 Mbps Data Rate for Dedicated SPI module (with no PPS) Two I2C™ modules (up to 1 Mbps) with SMBus Support Two CAN modules (1 Mbps) CAN 2.0B Support Programmable Cyclic Redundancy Check (CRC) Codec Interface module (DCI) with I2S Support  Direct Memory Access (DMA) 4-Channel DMA with User-Selectable Priority Arbitration Peripherals Supported by the DMA Controller include: UART, SPI, ADC, CAN and input capture Output compare and timers

DESCRIPTION 1) You just need to connect to Arduino interrupt pin 2, and can measure the number of PWM pulse/interrupt per unit of time. The water flow would be directly proportional to the number of measured pulses. 2)Water flow sensor can be used to measure the flow of liquids, i.e. the consumption of liquids in industrial or domestic usage. For example you can make a robotic cocktail dispensing machine, and can use this sensors to accurately measure components like Soda, Water, etc. Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse Signal. Connection details: Red wire is +5V Black wire is GND White wire is PWM signal output Description: Lowest rated working voltage: DC4.5 5V-24V Maximum operating current: 15 mA (DC: 5V) Working voltage range: DC 5~18V Load capacity: ? 10 mA (DC 5V) Temperature: ? 80 ? Operating humidity range: %RH (no frost) Allowed pressure: pressure 1.75Mpa Temperature: - C External threads: 1/2 We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

SAM3X8EA 32bit ARM Contex-M3 Due R3 Board Control  Arduino Due R3 AT91SAM3X8E   Description The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Features: 1. Microcontroller ：AT91SAM3X8E   2. Operating Voltage：3.3V  3. Input Voltage (recommended)：7-12V  4. Input Voltage (limits)：6-16V  5. Digital I/O Pins ：54 (of which 12 provide PWM output)  6. Analog Input Pins：12 7. Analog Outputs Pins：2 (DAC) 8. Total DC Output Current on all I/O lines ：130 mA 9. DC Current for 3.3V Pin：800 mA   10. DC Current for 5V Pin：800 mA  11. Flash Memory：512 KB all available for the user applications  12. SRAM：96 KB (two banks: 64KB and 32KB)   13. Clock Speed：84 MHz            Driver installation and usage procedure: ·                      Install  Arduino IDE ß  (click here) no extra driver needed for this card. ·                      Connect the board to computer, OS will auto detect ARDUINO DUE ·                      If the board is not auto detected, go to hardware device manager and choose update driver than choose advanced option “install from specific location” and point to the directory where your Arduino IDE is installed e.g. ”C:/program files/arduino-1.0.2/drivers” ·                      Launch Arduino IDE, select board as “arduino DUE” ·                      Select the com port OS created for the card(control panel  à  device manager) ·                      Open basics  à  blink sketch and upload. Package: 1 MCU BOARD  + 1 USB cable

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz  ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset  button. It contains everything needed to support the microcontroller;simply connect  it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get  started. Features:-  Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz  ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset  button. It contains everything needed to support the microcontroller;simply connect  it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get  started. Features:-  Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328)

The Arduino Uno is a microcontroller board based on the  ATmega328  (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16  MHz  ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Summary Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16  MHz Length 68.6 mm Width 53.4 mm Weight 25 g

Package Contains 1XArduino Uno R3 1X Usb Cable for Arduino The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz  ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset  button. It contains everything needed to support the microcontroller;simply connect  it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get  started. Features:-  Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz

Arduino UNO (Q021) The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz Length 68.6 mm Width 53.4 mm Weight 25 g

Description: The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Summary Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz Length 68.6 mm Width 53.4 mm Weight 25 g We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

PRODUCT DETAILS: Arduino UNO R3 Compatible Board ATmega328P ATmega16U2 with USB cable DESCRIPTION This is a Compatible board for Arduino uno r3, not original This UNO is a 100% compatible derivative of current R3 Arduino UNO The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins(of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection,a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller;simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Features:- Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Imported  Brand new  CPU Cooling Fan  for  Intel P4 Socket v dc with 12gm Heatsink paste free  (Note -If you order 2 cpu fans - you will get only 1pc of 12gm heatsink paste FREE (that is more than sufficient) P4 cpu cooling fan with steel lock strong fitting 6 Months Warranty Applicable upto Intel  p4 3.0 ghz and  intel celeron D (socket 478) compatible with intel 845 motherboard Note - Dear if you are not trained or professional to install this cpu fan then please take some help from computer professionals or can see the video tutorial from youtube The Ultra Quiet CPU Cooler uses a hi-engineering omni directional aluminium heat sink providing efficient CPU and Motherboard zone cooling. The fan uses INTEL approved power management (PWM), the fan speed is regulated automatically by CPU usage. Under normal conditions the CPU fan speed is low ensuring lo-noise computing. Intel approved push pins provide reliable board retention. Hi-performance thermal interface is pre-applied. Note - Just first apply the heat sink paste at bottom of aluminium base of fan and then install cpu fan Product Features KEEP YOUR CPU COOL AND GET AWAY WITH THE SYSTEM HANGING PROBLEM DUE TO CPU HEAT Intel Pentium 4 CPU Cooler - Superior Quality Hi-engineered aluminium heat sink for cost effective cooling performance.  Approved power management (PWM) Ultra Quiet fan.  Intel approved board push pins provide reliable retention.  Hi-performance thermal interface.  No noise  Increase lifetime span of processor  Cool down your processor Product Specifications Heat sink - g Heat sink size -  85.4 x 68.3 x 41.5 mm Fan size - mm Max air flow - 55 CFM Related voltage - 12 V DC Fan speed - % R.P.M. Noise - 19db (A) Bearing type - sleeve bearing Material-  aluminium base with plastic fan and steel lock strong fitting  compatible with intel 845 motherboard 100% customer satisfaction My Profile Check out my other listings View More...

LilyPad 328 ATmega328P Main Board compatible with Arduino’s IDE Features: Brand new and high quality The LilyPad Iduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The LilyPad Iduino can be programmed with the software. The ATmega328V on the LilyPad comes preburned with a bootloader that allows you to upload new code to it with the software. You can also bypass the bootloader and program the ATmega through the ICSP (In-Circuit Serial Programming) header. The LilyPad should only be programmed with software versions 0010 or higher. You can program it with earlier versions, but all of the time related functions will be switched off (making them twice as slow as they should be). Warning: Do not power the LilyPad with more than 5.5 volts, or plug the power in backwards: you'll kill it. 328 Main board; The Digital I/O Digital input/output terminal, a total of 0 ~ 13; The Analog I/O Analog input/output terminal, a total of 0 ~ 5; Support the ISP download function; Support the TX/RX terminals; Support the AREF terminals; Support the six groups of PWM terminal (Pin11 Pin10, Pin9, Pin6 and Pin5, responsible); The input voltage: 3.3 V DC; Using Atmel Atmega328V - 20 pu microcontroller; Specifications: Microcontroller: ATmega328V Operating Voltage: 2.7-5.5 V Input Voltage: 2.7-5.5 V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA Flash Memory: 16 KB (of which 2 KB used by bootloader) SRAM: 1 KB EEPROM: 512 bytes Clock Speed: 8 MHz Package includes: 1* LilyPad atmega 328 Main board Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

This is driving module is a common DC motor, using 293D chip low current DC motor drive chip. Pins are made of Arduino compatible, also facilitate the lovers rapid development based on Arduino. 2 5V servo motor (servo) port to the Arduino high resolution and high precision timer - no jitter! 1, as many as 4 bidirectional DC motor and 4 PWM speed (approximately 0.5% of the resolution) 2, as many as 2 stepper motor control, single / double step control, staggered or subdivided and rotation angle control. 3, 4: L293D H- bridge chip each Luqiao.0.6A (peak 1.2A) current and a thermal power protection, 4.5V to 36V. 4, pull down resistor maintain the motor stop status

Product Description ARM Core benefits The Due has a 32-bit ARM core that can outperform typical 8-bit microcontroller boards. The most significant differences are: A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. (for more information look  int type  page). CPU Clock at 84Mhz. 96 KBytes of SRAM. 512 KBytes of Flash memory for code. a DMA controller, that can relieve the CPU from doing memory intensive tasks. Pin Mapping:  SAM3X Pin Mapping page Product includes 1x arduino board 1x USB cable Summary Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Outputs Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Powered by Turbo Lister

Product Description ARM Core benefits The Due has a 32-bit ARM core that can outperform typical 8-bit microcontroller boards. The most significant differences are: A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. (for more information look  int type  page). CPU Clock at 84Mhz. 96 KBytes of SRAM. 512 KBytes of Flash memory for code. a DMA controller, that can relieve the CPU from doing memory intensive tasks. Product includes 1x arduino board 1x USB cable Summary Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Outputs Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Powered by Turbo Lister