Quadcopter power board

http://poweradaptermall.com/fsp0351pi01z-inverter-monitor-power-board-viewsonic-vx724-vx924-p-20432.html FSP035-1PI01Z Inverter Monitor Power Board Viewsonic VX724 VX924 FSP035-1PI01Z Inverter Monitor Power Unit Board for Viewsonic VX724 VX924 2 Months Warranty S/N:FSP035-1PI01 input100-240V~50/60HZ 1.0A DC12V 1.75A 720V 8.0mA(MAX) Size:120X140mm Package Content: 1X Power Board

http://poweradaptermall.com/samsung-713bm-913bm-power-board-bn4400123d-sipu6s-p-21545.html Samsung 713BM 913BM Power Board BN44-00123D SIP-U6S Samsung 713BM 913BM Power Board BN44-00123D SIP-U6S Model:SIP-U6S P/N:BN44-00123D Input: 100V-240VAC (50-60Hz) 1A Output: 5.1V -- 2A 14.5V -- 0.4A Compatible Model:Samsung 713BM 913BM Condition: USED. (There might be a little scratch on its surface, but still in great condition, and we will test it when we send the item out.) Package included: 1 xPower Board

http://laptoppartsmall.org/genuine-lg-w1942st-l194wts-eax48780004-aip0157-lcd-power-board-p-20586.html Genuine LG W1942ST L194WTS EAX48780004 AIP0157 LCD Power Board ondition: Brand Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Input AC:100-240v 50/60Hz 1.0A Size:18.5x12.0cm Compatible part number: 68709D0012B/1 AIP0157 EAX48780004 Compatible model: LG L1919SS L194WTS W1942ST Package Content: 1 X LG LCD Power Board

http://poweradaptermall.com/genuine-lg-l1919s-lcd-power-board-eax48780005-lgp002-l-h-p-20636.html Genuine LG L1919S LCD Power Board EAX48780005 LGP-002 L H Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Compatible part number:EAX48780005 LGP-002 L H Compatible model:LG L1919S L1919C E148279 Package Content: 1 X LG LCD Power Board

http://poweradaptermall.com/samsung-206bw-power-board-fsp0501pi02-bn4400127l-p-20521.html SAMSUNG 206BW Power Board FSP050-1PI02 BN44-00127L Model:FSP050-1PI02 Input AC: 100-240V 50/60Hz 1.2A Output DC: 13V 1.2A Size:148X155mm Weight: 270g Condition - New, 60 days warranty.

http://poweradaptermall.com/westinghouse-cw50t9xw-power-board-ay200l4hf01-p-21397.html WESTINGHOUSE CW50T9XW Power Board AY200L-4HF01 Model:AY200L-4HF01 Input AC: 100-240V 50/60Hz Output DC: 5V 12V 24V Size: 165x235mm Weight: 530g Condition - Used. 60 days warranty

Overview Power related problems are the number one cause of damage to equipment and lost data (damage not covered by product warranties). Belkin surge protectors are built to the highest standards and are backed by a genuine lifetime product replacement warranty that covers the surge protector and any equipment properly connected to it. Key Features Ultimate Series 4-Way Surge Protector Recessed power switch prevents accidental shutdown 4-Surge protected AC outlet

Power Distribution Board (PDB panel) is a component of an electrical system that Distributes electrical power into a subsidiary circuit by a circuit breaker and switch fuse unit. Power Distribution Board also is known as the power distribution board panel of the electrical panel. In addition, equipped complete with all types of the required number of air circuit breakers, switch fuse unit, contactor, protective relays, fuses, meters, indicating lamps, push buttons, busbar, etc.

The power factor correction is a technique of increasing the power factor of a power supply. Switching power supplies without power factor correction draw current in short, high-magnitude pulses. Displacement PF is defined as the cosine of the angle between fundamental voltage and fundamental current of the load. The presence of Harmonics increases the RMS current and voltage relative to their respective fundamental values. This increases the KVA of the Load. The Power Factor correction capacitor taking into account the effect of the Harmonics is called the true power factor.. True PF ≤ Displacement of the factor by which Displacement PF is related to the True PF is called the Distortion PF What is Power Factor Correction Capacitor The power factor of your installations can be improved by the placement of power factor capacitors where they work as reactive generators of power. This is required when you notice that the apparent current is superior to the working current that you are getting. Only Power Factor Correction Capacitors can improve Displacement in Power Factor The application of shunt capacitors to industrial power systems has several benefits. Among these are: Benefit 1 — Reduce Power Bills Benefit 2 — Gains in System Capacity Benefit 3 — Improve Voltage Conditions Benefit 4 — Reduce Line Losses Listed below are various installation options. Care must be taken in sizing and placing power factor correction capacitors. Leading power factor, greater than 100%, must be avoided. The capacitors should only be online when the load requires kVAR and disconnected when the load is reduced. Where do you need to install these capacitors? You may be thinking about where to install these capacitors for having the best result. We not only supply you with the best capacitors but also help you in the proper installation of those. The ideal places to use these capacitors are: If you find that load that is applied is continuous in nature and it is stable, then the capacitors are placed in the main LV distribution board that you have. There are various advantages that you can have from such installation as: Reduction in penalties regarding traffic for the consumption of kvars which is excessive It helps in reduction of KVA demand for apparent current. It helps in making the supply transformer free so that it can take up more load. If you have a huge installation where the load/time pattern differs from sector to sector, then the capacitors need to be fitted with the bus bars that are present at the local board for distribution. The advantages that can be achieved are: Reduction in penalties regarding traffic for the consumption of kvars which is excessive It helps in reduction of KVA demand for apparent current. It helps in making the supply transformer free so that it can take up more load. The supply cable size can be reduced There will be a reduction in the loss that happens in the cables. If you see that the power that is used by the motor is significant if compared with the power that you have in the installation, then these capacitors are connected to the terminals to have the desired result. The advantages that can be achieved in such a case are: Reduction in penalties regarding traffic for the consumption of kvars which is excessive Power Factor Correction helps in reduction of KVA demand for apparent current. Cable size and loss in the cable can also be reduced by such implementation. If you wish to have such power factor correction capacitors, then you need to have it from Power Matrix Solutions Pvt. Ltd.

PCB for High power output PA Series Amplifier, provides superb & Power full sound quality. With  2SCSA output devices the amp will put out close to 400 WATTS @ 8 OHMS and 800 Watt @ 4 OHMS.  Size 94 mm X 260 mm. FR4 Glass epoxy 1.6 mm THK Board 70  Microns copper. Included Schematic & BOM. Qty- 02 Nos. (TWO ONLY) PCB. FOR STEREO Note:- Amplifier Output Power 400 Watt @ 8 Ohms and 80 Watt @ 4 Ohms. We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Rs. only) Contact details:- E-Mail: Mob. No.

EADPS01 power supply board uf/63v X 4 SAMWHA capacitors 35amps bridge rectifier On board fuse protection LuX pins for easy connections High grade glass epoxy PCB Suited for all types of amplifiers PCB size - 13.5mm X 80mm

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit): All resistors (1% metal film) Power resistors Faston connectors Silpad 400 insulators Silver Mica compensation capacitors MJE drivers MJL output transistors (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors Main Heat Sink (100 mm x 182 mm x 19 mm - 1 No.) and Heat Sink for LME No. Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 5 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail:

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 7 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Branded components): All resistors (1% metal film)  Power resistors (CRC) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) Main Heat Sink required (100 mm x 260 mm x 32 mm - 1 No.) - NOT INCLUDED. Note:- Amplifier Output Power 350 Watt @ 8 Ohms and 550 Watt @ 4 Ohms (Power supply: Volt 7 Amps) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors,) Rs./- Shipping charge extra. Contact details:- E-Mail: Mob. No.:

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  2SCSA output devices. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit without Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors (Manufacturer: Toshiba ) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 250 Watt @ 8 Ohms and 400 Watt @ 4 Ohms (Power supply required: Volt 6 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Contact No.: Mob. No. 

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 8 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Any Query Please call on: Mob. No.