Rack dc pin

DC Power 4.8x1.7mm To 7.4x5.0mm & Pin Cord M/F Adapter Cable For HP DELL Laptop     Condition: 100% Brand New and High Quality Quantity: 1 Pcs   Spec:     DC Tip Plug Connector Cable, 4.8x1.7mm Male To 7.4 x 5.0mm & Central Pin Female adapter HP small power charge cord To HP big power charge cord or Dell power charge cord.  Connector: Male: Outside diameter: 4.8mm Inside diameter: 1.7mm Female: Fits the male dc tip of outside diameter: 7.4mm, inside diameter: 5.0mm with central pin  Length: full 15.7Cm APROX

DC/DC 3.3V AMSV Power Supply Module Voltage Regulator Description: 2P single row pin input and output for easy connection Dual-panel design, the layout is nice Specially designed two rows of needle fixing holes can be fixed directly

Description The 5x DC/DC 4.5V-7V to 3.3V AMSV Power Supply Module Voltage Regulator 2P is specially designed two pin fixing holes that can be directly fixed on universal board to extend the experiment. Its Input: DC voltage is 4.5V - 7V (input voltage must be higher than the output voltage to 1V or more.) and  Output voltage is: 3.3V, 800mA (load current must not exceed 800ma). 5V turn to 3.3V power regulator module This regulator module is convenient to use with high safety performance and multiple power expansion interface. The module is suitable for electronic devices such as SCM project design needs 3.3V power supply It is simple Dual-panel design and the Input output using the 2 Pin single row pin for easy connection. Technical parameters: Input:  DC 4.5V-7V (Input Voltage must be Greater than the Output voltage high above 1V.) Output:  3.3V- 800mA (load current can not exceed 800ma) PCB board size:  2.5  x  1.1 cm   Package Includes: 1 Piece new  DC/DC Step-Down Voltage Regulator 3.3 volt Power Supply Adapter AMS Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The 5x DC/DC 4.5V-7V to 3.3V AMS1117-3.3V Power Supply Module Voltage Regulator 2P is specially designed two pin fixing holes that can be directly fixed on universal board to extend the experiment. Its Input: DC voltage is 4.5V - 7V (input voltage must be higher than the output voltage to 1V or more.) and  Output voltage is: 3.3V, 800mA (load current must not exceed 800ma). 5V turn to 3.3V power regulator module This regulator module is convenient to use with high safety performance and multiple power expansion interface. The module is suitable for electronic devices such as SCM project design needs 3.3V power supply It is simple Dual-panel design and the Input output using the 2 Pin single row pin for easy connection. Technical parameters: Input:  DC 4.5V-7V (Input Voltage must be Greater than the Output voltage high above 1V.) Output:  3.3V- 800mA (load current can not exceed 800ma) PCB board size:  2.5  x  1.1 cm   Package Includes: 1 Piece new  DC/DC Step-Down Voltage Regulator 3.3 volt Power Supply Adapter AMS1117-3.3 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

The AMS series of adjustable and fixed voltage regulators are designed to provide 800mA output current and to operate down to 1V input-to-output differential. input: DC 4.5V--7V (input voltage must be higher than the output voltage 1V or more.) output: 3.3V,800mA (load current should not exceed 800ma) double-sided plate design, layout, elegant; specially designed 2 pin mounting holes can be directly fastened to the holes on the plate scale experiments; input/output 2P single row needle, easy connection; size of the PCB Board: 2.5cm*1.1cm power indicator (red) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you  

Feature: color: black casing material: plastic outer dimensions:80*60*78mm(L x W x H)  Connection thread size: G1/4"input and output power connector:3 pin Nominal operating voltage:DC12V starting voltage:DC8V power consumption:10W current draw:1A max pressure head:4m flow rate:500L/h Lifespan:50000hours Noise: below 30bd Package: 1pcs water pump Feel free to call us at 011-25390245 if you need more details about the product.

This AC/DC power adaptor normally used with any electronic devices that require following  power specifications.  Specifications INPUT V (AC) ~ Hz mA OUTPUT 14V ~ 3A /mA (DC) CONNECTOR SIZE Inner Diameter: 5.5MMXMM (Standard size dc pin) GRIP TYPE - YELLOW CONNECTOR (SEE SECOND IMAGE) polarity: + inside / - outside SMPS Based power supply  DC PLUG CORD LENGTH:  1.5M POWER CORD USED - PC TYPE PLUG (NOT INCLUDED)

This AC/DC power adaptor normally used with any electronic devices that require following  power specifications.  Specifications INPUT V (AC) ~ Hz 500mA OUTPUT 5V ~ 2.5A/mA (DC) CONNECTOR SIZE Inner Diameter: 5.5MMXMM (Standard size dc pin) polarity: + inside / - outside SMPS Based power supply  CORD LENGTH: 1.5M APPROX

This AC/DC power adaptor normally used with any electronic devices that require following  power specifications.  Specifications INPUT V (AC) ~ Hz 500mA OUTPUT 9V ~ 1.5A/mA (DC) CONNECTOR SIZE (DUAL CONNECTOR) Diameter: 5.5XMM AND 4.8MMX1.7MM (SONY TYPE DC Pin/Plug) polarity: + inside / - outside SMPS Based power supply  CORD LENGTH: APPROX 1.5M

5.5v solar panel ma With Plastic Case DC Lead 5.5v Dc Pin ma 1x Mini Solar panel No other Technical Information available Shipping Most of item Shipment Same Day if you brought before 11am!! Delivery

2pcs Female Type DC Power  Adapter Jack Connector Pin Plug ☻By attaching this connector at one end to dc power adapter and other end to the camera power cable you can connect the camera without having to cut the camera power cable or the DC power adapter thus you save the warranty of your equipment. ☻Very convenient for connecting the LED light strips to the 12volt power adapter without having to destroy the power adapter pin. ☻SPECIFICATIONS:-  ☻You will get 2pcs Female DC power adapter plug. ☻Female plug size: (approx) 38 mm x 14 mm x 13 mm. ☻Male plug features a 5.5 mm x 2.1 mm plug with marked polarity. ☻No more cutting and soldering. ☻You simply screw your figure cable and just plug it in. ☻It is a perfect solution for those who want to make custom power cable. ☻This CCTV Camera DC Power Connector will provide a great connection. ☻RoHS / CE Approved. ☻Color: Green-Black as shown

2pcs Male Type DC Power  Adapter Jack Connector Pin Plug ☻By attaching this connector at one end to dc power adapter and other end to the camera power cable you can connect the camera without having to cut the camera power cable or the DC power adapter thus you save the warranty of your equipment. ☻Very convenient for connecting the LED light strips to the 12volt power adapter without having to destroy the power adapter pin. ☻SPECIFICATIONS:-  ☻You will get 2pcs Male DC power adapter plug. ☻Male plug size: (approx) 38 mm x 14 mm x 13 mm. ☻Male plug features a 5.5 mm x 2.1 mm plug with marked polarity. ☻No more cutting and soldering. ☻You simply screw your figure cable and just plug it in. ☻It is a perfect solution for those who want to make custom power cable. ☻This CCTV Camera DC Power Connector will provide a great connection. ☻RoHS / CE Approval. ☻Color: Green-Black as shown

2pcs(1pair), 1Male + 1Female Type DC Power Adapter Jack Connector Pin Plug ☻By attaching this connector at one end to dc power adapter and other end to the camera power cable you can connect the camera without having to cut the camera power cable or the DC power adapter thus you save the warranty of your equipment. ☻Very convenient for connecting the LED light strips to the 12volt power adapter without having to destroy the power adapter pin. ☻SPECIFICATIONS:-  ☻You will get 2pcs(1pair) male-female adapter plug. ☻2.1mm x 5.5mm CCTV Camera DC Power Plug Connector. ☻DC Power Plug with plastic construction and strain relief. ☻This 2.1mm x 5.5mm Power Plug features one power connector end DC plug male to another end terminal for CCTV camera connected. ☻It is a perfect solution for those who want to make custom power cable. ☻This CCTV Camera DC Power Connector will provide a great connection. ☻Internal diameter of the plug: 2.1mm. ☻External diameter of the plug: 5.5mm. ☻It measures approx. 1.5" long, 0.55" wide, 0.5" thick. ☻RoHS / CE Approved. ☻Color: Green-Black as shown

Call 9791091909 for IBM Dealer and Supplier for The top-selling IBM System X (Tower- optimized), (Rack-optimized),Bladecentres Servers provide a complete infrastructure that supports both your business objectives and your business growth. IBM X 3550 M4 - 7914IVZ Rack Server Specs: o Two Socket Rack (1U Rack) o Intel Xeon E5 2609v2 (Quad Core) Ivy Bridge, 2.50 Ghz, 10 Mb, 1333 mhz o 8GB/ 192 GB DDR3 ECC memory, up to 1333 MHz 12 DIMM Slots o Open Bay 2.5inch HDDHot Swap SAS/ SATA o Multi Burner, Integrated RAID 01, (M5110) o No Monitor o Maximum internal storage : Up to 12.8 TB (2.5-inch model) or 12 TB (3.5-inch model) SAS/SATA o Network interface: 4x1 GbE (std.), 2x10 GbE embedded adapter (slotless opt.)/Trusted Platform Module o Power supply: 1/2 redundant 550 W AC, 750 W AC, or 750 W DC (model dependent) o Hot-swap components: Power supply and hard disk drives o Expansion slots: 2 PCIe 3.0 slots, optional 1 PCI-X o Systems management: IBM IMM2 with optional FoD remote presence o Operating System: Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server o 3 Years Onsite + 24 x7 Warranty Authorised Dealer for Ibm Servers in Chennai, Tamilnadu. Supplier for IBM SystemX,Storage and Blade Servers in Chennai and Tamilnadu.Authorised Server Dealers for IBM System X Series Server in Chennai .ibm Dealers for Servers in Chennai . For more Details call us 9791091909, 9884926649 or log on http://chennaisystems.com

Call 9791091909 for IBM Dealer and Supplier for The top-selling IBM System X (Tower- optimized), (Rack-optimized),Bladecentres Servers provide a complete infrastructure that supports both your business objectives and your business growth. IBM X 3560 M4 - 7915N6A Rack Server Specs: o Two Socket Rack (2U Rack) o Intel Xeon E5 2609v2 (Quad Core) Ivy Bridge, 2.50 GHz, 10 Mb, 1333 MHz o 8GB/ 192 GB DDR3 ECC memory, up to 1333 MHz 12 DIMM Slots o 300 GB SAS 10k RPM, 2.5" Hot Swap SAS/ SATA o Multi Burner, Integrated RAID 01 (M5110e) o Media Drives : DVD +/-RW o No Monitor o Maximum Memory Supported: 768 GB o USB Keyboard and Mouse o Network interface: 4x 1 GbE (std.), 2x10 GbE Embedded Adapter (slotless opt.)/TPM o Power supply (std/max): 1/2 redundant 550 W AC, 750 W AC, or 750 W DC (model dependent) o Hot-swap components: Power supply and hard disk drives o Expansion slots: 4 - 6 PCIe ports or 4 PCI-X (CTO) or 2 double-width PCIe (for GPU) o USB Port: 2 front/4 back/2 internal o Systems management: IBM IMM2 with optional FoD remote presence o Operating System: Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server o 3 Years Onsite + 24 x7 Warranty Authorised Dealer for Ibm Servers in Chennai, Tamilnadu. Supplier for IBM SystemX,Storage and Blade Servers in Chennai and Tamilnadu.Authorised Server Dealers for IBM System X Series Server in Chennai .ibm Dealers for Servers in Chennai . For more Details call us 9791091909, 9884926649 or log on http://chennaisystems.com