Avr

AVR USB Programmer with case USBasp USBISP for ATMEL ATmega ATtiny microcontrollers. Painless AVR controller programming   Product Description: Main Features: ·         Brand new and high quality ·         Support for Linux, Mac OS X and Windows ·         5 KB/sec maximum write speed. ·         10 pin ISP interface. ·         Can be used with Khazama, AVRDUDE, PonyProg and other ·          Support for AVRDUDE from version 5.2 onwards   Supported devices: Mega Series: ATmega8 – ATmega48 – ATmega88 – ATmega168 – ATmega328 – ATmega103 – ATmega128 – ATmega – ATmega – ATmega16 – ATmega161 – ATmega162 – ATmega163 – ATmega164 – ATmega169 – ATmega – ATmega – ATmega32 – ATmega324 – ATmega329 – ATmega – ATmega64 – ATmega640 – ATmega644 – ATmega649 – ATmega – ATmega – ATmega Tiny Series ATtiny12 – ATtiny13 – ATtiny15 – ATtiny25 – ATtiny26 ATtiny45 – ATtiny85 – ATtiny   Classic Series AT90S – AT90S – AT90S – AT90S – AT90S AT90S – AT90S – AT90S AT90S  CAN Series AT90CAN128 PWM Series AT90PWM2 – AT90PWM3 Package includes: ·         1 x USB AVR Programmer with case ·         1 x 10-pin programming cable ·         A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Features Flash Burner for AVR Series from ATMEL and Microcontrollers. Communication - USB Auto Erase before writing and Auto Verify after writing Freeware AVR GCC C Compiler ISP Programming Socket Connects through AVR DUDE USB Powered Device Support AT89s51, AT89s52, AT89s53, AT89s AT90S, ATMEGA, ATMEGA ATMEGA ATTINY AT90CAN - AT90PWM2,3 Package Contents Programmer BRD FREE USB Port Cable FREE 6 Burg Cable Female 2 Female Programmer Driver (will be sended through Email) Programming Software For AVR and . (will be sended through Email)

FREE USB CABLE + & AVR USB ISP Programmer (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL     Product Overview   1.     About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

1.      About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP  (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

With this board you can develop and prototype with ATMEGA16/ATMEGA pin) microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User buttons and status LEDs. The bridge rectifier allow this board to be powered with both AC and DC power supply adapters.   FEATURES AVR Development Board for Atmel ATMEGA ISP Socket for Flashing On board Regulated Power Supply 5v,12v supplys Easy to test with Burg Connecters wires An RS232 Serial Port 7Seg Mulitplexed Display DC Power Supply Connector(12v Ac or Dc) READY INTERFACE For LCD display 2linex16Character 24Cxx (I2C) (EEPROM) RTC (DS LED array Matrix Key Pad 4 Interrupt Switches +12v Relay (one) Package Content   AVR Development Board (WITH CHIP MAX232) Burg Connecters 20 Nos Female to Female.

Detailed Product Description AVR Programmer With Serial Communication FEATURES: It is used to load the programme into AVR microcontroller through DB9 connector and FRC connector. It is used for serial communication. It contain Serial Cable,FRC Cable,Software CD. CONTENTS: 1 Programmer 1 FRC cable 1 Serial cable 1 Software CD

PACKAGE CONTAINS: 1. USBasp Programmer 2. 5x2 FRC Cable 3. USB Cable Supported microcontrollers include:  Mega Series ATmega8 ATmega48 ATmega88 ATmega168 ATmega328 ATmega103 ATmega128 ATmega ATmega ATmega16 ATmega161 ATmega162 ATmega163 ATmega164 ATmega169 ATmega ATmega ATmega32 ATmega324 ATmega329 ATmega ATmega64 ATmega640 ATmega644 ATmega649 ATmega ATmega ATmega Tiny Series ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26 ATtiny45 ATtiny85 ATtiny Setting up the XploreFlash Programmer Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it. Step 2: Download and install USB driver for the programmer. Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS) Step 4: Follow Step by step guide on using the programmer software XploreFlash program the micrcontroller. The GUI software will require.NET framework 2.0 or later please download and install it. For additional details and technical support visit the Xplore Flash page.

1 Channel Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino This is a  1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).   Features: 1 -Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250 V AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size R elay status indicator LED (red) Weight ： 10 0 g   Module interface specifications (3 wire)   1. External 12V 2. GND external GND 3. 1N interchange relay control interface (Control by 3.3V or 5V Logic)   Package included:   1 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

9% Discount 31st March coupon code:  COUPONDUN9 1.     About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP  (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

USBASP USBISP AVR Programmer USB USBASP USBISP AVR Programmer USB These AVR programmers are based on  Thomas Fischl's USBasp design and connect to your computer's USB port. Not only are they quite compact (70x20mm), but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

100 % GENUINE!!!  IMPORTED!!!  QUALITY CHECKED!!! LIMITED STOCK LOWEST PRICE CHALLENGE!!! Product Description 1. ATMEL ISP standard 10PIN convert to standard 6PIN interface 2. 10PIN to 6PIN ISP Adapter board  Package Included: 1 pcs 10 Pin to Standard 6 Pin Adapter Board for ATMEL AVRISP USBASP STK Pin To 6 Pin Programming Adaptor Quick Overview Perfect For Programming Any 6 Pin Programmable Boards Such As Arduino Boards.  Details In The Avr Isp (In System Programming). 6 Pin Or 10 Pin Frc Connectors Are Used. If Your Avr Isp Programmer Have 10 Pin Frc Connector And The Target Microcontroller Has 6 Pin Frc Connector For Isp Or Vice Versa Then 6 To 10 Pin Avr Isp Converter Is Very Handy For Insuring Compatibility Between Any Type Of Frc Connectors Between Programmer And The Target Board.  SHIPPING: all over india By speed post  (plz make sure speed post service is available at your city), generally takes 3-7 days to deliver FEEDBACK: PLZ GIVE 5 STAR RATINGS AND  POSITIVE  FEEDBACK  IT'S VERY IMPORTANT FOR US 100% positive feedback and satisfaction of buyers are our moto

USB Download Programmer Emulator Debugger For AVR JTAG ICE Atmega AVR STUDIO Description Features:  Wide operating voltage,  support 3.3V, Plus a 0.5A PTC FUSE,  This simulation software is compatible upwards and downwards,  Software Support AVR ATUDIO latest   Compatible micro-controllers: ATmega128, ATmega128L, ATmega16, ATmega162, ATmega162V, ATmega165, ATmega165V, ATmega169, ATmega169V, ATmega16L, ATmega32, ATmega323, ATmega323L, ATmega32L, ATmega64, ATmega64L.  This emulator is a connected USB port,

USB Download Programmer Emulator Debugger For AVR JTAG ICE Atmega AVR STUDIO Description Features:  Wide operating voltage,  support 3.3V, Plus a 0.5A PTC FUSE,  This simulation software is compatible upwards and downwards,  Software Support AVR ATUDIO latest 4.12/4.14/4.16/4.17/4.18  Compatible micro-controllers: ATmega128, ATmega128L, ATmega16, ATmega162, ATmega162V, ATmega165, ATmega165V, ATmega169, ATmega169V, ATmega16L, ATmega32, ATmega323, ATmega323L, ATmega32L, ATmega64, ATmega64L.  This emulator is a connected USB port,

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 10 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc....   ***(Work with All Analog/Digital circuits with signal from 3V to 15V) *** Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 3.3v and 5v micro controller  (Check Other Listings  for  1.8V-5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 3V to 16V(1.5V to 16V for 1.8V logic) with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 3.3V and 5V micro controllers/Digital (1.8V Version also available Please Check My other Listings).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

USB ASP AVR Programmer Complete solution for programming popular AVR series of micro controllers with ease. Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 1 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

USB ASP AVR Programmer Complete solution for programming popular AVR series of micro controllers with ease. Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.   Shipping All shipments will be sent by Reputed Courier Service provider. Incase of return policy of refund & exchange of the goods, customer has to pay the return courier charges. Shipping within India only. Please provide your Full Address and Contact Number for easy delivery. Extra time will be required for remote locations delivery. Tracking number will be provided to track your item

Introduction AVR CRUX is a tiny microcontroller development board based on ATtiny85, similar to the Arduino line, only cheaper, compact, lower power consumption and a bit less powerful. The board supports use of specific Arduino IDE and conveniently uses Arduino syntax for programming. This is a great way to jump into electronics and also perfectly fits when an Arduino is too big. AVR CRUX board may be tiny, but don’t be fooled by its size. The board has digital IO pins for regular use, PWM outputs to control motors and actuators, Analog inputs to interface with your sensors and a USB port to program and interact with your computer. It even has a tiny button switch used as reset button or a custom button and a user controllable LED to play around and create your first “blinking LED” program. A powerful board intended for artists, designers, hobbyists and anyone interested

This is audio video receiver  Support and up to 2 sub-woofer Codeless or with cable  Best AVR for best high end sound  AVR IS WORKING AND IN VERY GOOD CONDITION 

1 Piece DHT11 Temperature Humidity Sensor for Arduino, AVR, ARM and Other MCU Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details Description: Working Voltage: V Temperature Range: 0 - 50 Degree Celsius RH Range: % Package Include 1 Piece DHT11 Temperature Humidity Sensor for Arduino, AVR, ARM and Other MCU About Us We are a small company based

Starter_AVR USB is introductory board for the AVR family of microcontrollers. The board has  Atmega32 MCU with UART bootloader,  hence no external programmer is required. Bootloader occupies approximates 2K Bytes of flash memory, remaining 30K Bytes can be used for user programming. Features Atmega32 MCU 32K bytes of In-System Self Programmable Flash Memory 1024 bytes EEPROM 2K bytes Internal SRAM 32 IO pins UART, SPI, JTAG and I2C support. Real Time Counter with Separate Oscillator Four PWM Channels**8-channel, 10-bit ADC 8 Single-ended Channels 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x USB Interface CP2102: for communicating with the host computer. LCD Interface: 16 characters, 2 lines Test Leds (2) and Switches(2) 5X2 ISP Programmer Connector Breakout for all Ports Breakout for +5v,Gnd and Vin Power Supply compatible with AC/DC adapters(9 to 12V DC, 1A). Physical Features Dimensions: 70mm X 90mm 1.6mm Glass Epoxy, FR4 PCB Wave Soldered. Downloads: Schematic Sample Code For more details, technical support and downloads visit the product page.

Shipping Payments Return policy About us   CyberPower OFFICE POWER AVR 685AVR Replacement UPS Battery Brand: UPG MFG Part#: UBALT57 SKU: Condition: New   Volts 12 V Amp Hour 8 AH Chemistry SLA / AGM Terminal.187" - F1 Length 5.94

Package includes: 1 x Atmega8l-8AU Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC

Description：   84 X 84 dot matrix LCD,can show 4 lines of characters   Power supply voltage:2.7V-3.3V   Data interface level:2.7-5V   Backlight power supply voltage:highest 3.3V   Module size:43.6mm(width) x 43.1mm(length)   Installation diameter:2mm Pin Definition:   1.RST--------- reset   2.CE---------- chip selection   3.DC---------- data/commands choice   4.DIN--------- serial data line   5.CLK--------- serial Clock Speed   6.3.3V-------- VCC   7.LIGHT------- backlight control terminal   8.GND--------- power negative 3.Features: 1>. 84 X 84 dot matrix LCD,can show 4 lines of characters 2>. Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the arduino,AVR,PIC,STM32,STC MSP430 and so on.Transfer rate up to 4Mbps,can full speed write display data without waiting time. 3>. Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace. 4>. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small 5>. Low power supply,the working current

Description Package Includes: 1 Piece new  KY-040 Rotary Decoder Encoder Module For Arduino AVR PIC It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Package includes: 1 x Atmega8l-8PU + Free 28 Pin base(socket) Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC

zipedit] UNIVERSAL AVR, AT90, ATINY USB PROGRAMMER 1 YEAR WARRANTY SAME DAY FAST AIR / SURFACE SHIPPING EASY TO USE ZIF SOCKET

Package includes: 10 x Atmega8l-8AU Features   • High-performance, Low-power AVR ® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits   In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM   Endurance: Write/Erase Cycles     1K Byte Internal SRAM   Programming Lock for Software Security   Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture   Mode – Real Time Counter with Separate Oscillator – Three PWM Channels – 8-channel ADC