Controlled wireless

Laptop/Bluetooth Controlled Wireless Robot Robot Controlled By Laptop over Bluetooth Wireless Protocol. PACKAGE INCLUDES: 1) A ASSEMBLED Laptop/Bluetooth Controlled Wireless Robot 2) Pre- Built Windows Application By Robosoft Labs to drive the robot (Source code won't be provided due to copyright issue)   Laptop/Bluetooth Controlled Wireless Robot IS ASSEMBLED OF FOLLOWING LISTED ITEMS: 1) TWO L TYPE BO DC MOTOR (+5V TO +12V) 2) 2 CLAMPS 3) 1 CASTOR WHEEL 4) TWO WHEELS 5) L293D BOARD (MOTOR DRIVER BOARD) 6) CHASSIS 7) BLUETOOTH RECEIVER MODULE 8) 1 AVRDUINO/ARDUINO COMPATIBLE BOARD WITH AVR'S ATMEGA 8 IC 9) CONNECTING BURG WIRES 10) TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE THE ROBOT FROM SCRATCH PARTS TO A Laptop/Bluetooth Controlled Wireless Robot. 11) PRE BUILT AND BURNT Laptop/Bluetooth Controlled Wireless Robot PROGRAM IN AVRDUINO ATMEGA 8 IC 12) NUT AND BOLTS. Points to be noted: 1) This Laptop/Bluetooth Controlled Wireless Robot is ASSEMBLED BY PRE-FABRICATED PARTS. 2)  Laptop/Bluetooth Controlled Wireless Robot CHASSIS is made of PLY WOOD 3) PROGRAM CODE or HEX FILE WONT BE PROVIDED Due to Copyright Issue. 4) Power Supply for Robot: Please use Only +9V battery supply (Batteries not Included as it can't be shipped)   5) Color of Components used may vary according to availability.                        FOR ANY QUERIES OR DOUBT PLEASE CONTACT US BEFORE ORDERING                                                                       E-MAIL:                                                                       MOBILE: +91- Regards, ROBOSOFT LABS                                                                  

RF Controlled Wireless Robot using Microcontroller DIY(DoItYourself) PROJECT Kit Motor control through RF communication is a very interesting application and is widely used

BRAND NEW  HIGH QUALITY  IR  8  Channel Remote Control Relay Board Module with  12V  Relays  5A / 250V AC   Overview: IR Remote control is a combination of Infrared Transmitter and Receiver which contains  8 Relays    which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relays on the receiver board, i.e. (1 operates Relay 1), (2 operates Relay 2), etc. Each relay has indicator LED showing the ON/OFF status. Applications: Wireless Remote control of Lights and Fan at home or office Wireless Remote control of Projectors and speaker system

Best Quality Remote Control Switch For Five Lights And Two Fans One Extra Plug Controlled With Manual Switch With One Year Warranty Only @ ₹318/- Per Switch point - Compare this price factor with all other brands

Best Quality Remote Control Switch For Five Lights And Two Fans One Extra Plug Controlled With Manual Switch With One Year Warranty Home automation is latest trend

ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT T his Wireless robot is control by ANDROID APP with the help of BLUETOOTH Wireless Protocol. This ANDROID APP also Supports VOICE COMMANDS to drive the robot too. PACKAGE INCLUDES: 1) A ASSEMBLED ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT 2) Pre- Built ANDROID APP By Robosoft Labs to drive the robot. (APP source code/program won't be provided due to copyright issue) ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT IS ASSEMBLED OF FOLLOWING LISTED ITEMS: 1) TWO L TYPE BO DC MOTOR (+5V TO +12V) 2) 2 CLAMPS 3) 1 CASTOR WHEEL 4) TWO WHEELS 5) L293D BOARD (MOTOR DRIVER BOARD) 6) CHASSIS 7) BLUETOOTH RECEIVER MODULE 8) 1 AVRDUINO/ARDUINO COMPATIBLE BOARD WITH AVR'S ATMEGA 8 IC 9) CONNECTING BURG WIRES 10) TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE THE ROBOT FROM SCRATCH PARTS TO A ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT. 11) PRE BUILT AND BURNT ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT PROGRAM IN AVRDUINO ATMEGA 8 IC 12) NUT AND BOLTS. Points to be noted: 1) This ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT is ASSEMBLED BY PRE-FABRICATED PARTS. 2)  ANDROID/VOICE/BLUETOOTH Based Wireless Controlled ROBOT CHASSIS is made of PLY WOOD 3) PROGRAM CODE or HEX FILE WONT BE PROVIDED due to COPYRIGHT ISSUE. 4) Power Supply for Robot: Please use Only +9V battery supply (Batteries not Included as it can't be shipped) 5) Color of Components used may vary according to availability. 6) Mobile phone shown is not included

DESCRIPTION ABOUT This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. FEATURES AND USAGE This is the XBee WiFi Module with wire antenna from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of , the XBee WiFi creates new wireless opportunities for energy management, process and factory automation, wireless sensor networks, intelligent asset management and more. Focused on the rigorous requirements of these wireless device networks, the module gives developers IP-to-device and device-to-cloud capability. XBee modules offer developers tremendous flexibility and are available in surface mount and through-hole form factors. The XBee WiFi shares a common footprint with other XBee modules. This allows different XBee technologies to be drop-in replacements for each other. As a member of the XBee family, the XBee WiFi combines hardware with software for a complete modular solution. XBee WiFi modules are designed to communicate with access points in existing infrastructures. Developers can use AT and API commands for advanced configuration options. SPECIFICATIONS 3.3V @ 40mA 250kbps Max data rate 2mW output (+3dBm) 400ft (120m) range Built-in antenna Fully FCC certified 6 10-bit ADC input pins 8 digital IO pins 128-bit encryption Local or over-air configuration AT or API command set Application Ideas: Remote controlled Boe-Bot robot Wireless data acquisition Remote signal beacon for adventure seekers Remote industrial monitoring Lighting control Keyless entry INCLUSIONS 1 x XBEE WIRELESS COMMUNICATION MODULE (WIRE ANTENNA) We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

HC05 Bluetooth Module Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

REMOTE POWERED LIGHTS, FANS, TUBES (Control 5 Lights/Fan) NOW YOU CAN SWITCH ON, SWITCH OFF YOUR LOADS LIKE FAN, TUBE, BULB ETC, remote has 4 ports for three different loads, LOADS CAN BE SWITCHED ON ALL TOGETHER OR INDIVIDUALLY,WORKING RANGE IS AROUND 100 METRES, Radio Controlled so No line of sight required. PLEASE NOTE: Product may look slightly different from the one

REMOTE POWERED LIGHTS, FANS, TUBES (Control 5 Lights/Fan) NOW YOU CAN SWITCH ON, SWITCH OFF YOUR LOADS LIKE FAN, TUBE, BULB ETC, remote has 5 ports for 5 different loads, LOADS CAN BE SWITCHED ON ALL TOGETHER OR INDIVIDUALLY,WORKING RANGE IS AROUND 100 METRES, Radio Controlled so No line of sight required. PLEASE NOTE: Product may look slightly different from the one

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 10 x Interface Base Board Module For Further Details: Email:

Product Description   100% brand new,High quality. Easy to operate safe and energy saving. You don't need to get up to turn on or turn off the light by remote control switch. You will no longer running around

Laptop/Bluetooth Based Wireless Home Automation i.e. Lights/Fans On/Off PROJECT KIT V AC Electrical Devices Controlled By Laptop/Bluetooth PACKAGE INCLUDES: 1) A ASSEMBLED Laptop/Bluetooth Based Wireless Home Automation i.e. Lights/Fans On/Off PROJECT KIT 2) Pre-Built Windows Application by ROBOSOFT LABS (CAN'T be MODIFIED, Source code won't be provided due to copyright issue) Points to be noted: 1) This Laptop/Bluetooth Based Wireless Home Automation i.e. Lights/Fans On/Off PROJECT KIT is ASSEMBLED BY PRE-FABRICATED PARTS. 2) Laptop/Bluetooth Based Wireless Home Automation i.e. Lights/Fans On/Off PROJECT KIT   is made IN PLASTIC PROJECT BOX. 3) BULBS AND LAPTOP SHOWN WON'T BE PROVIDED. 4) PROGRAM CODE or HEX FILE WONT BE PROVIDED DUE TO COPYRIGHT ISSUE. 5) Color of Components used may vary according to availability.  A TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE FROM SCRATCH PARTS TO A Laptop/Bluetooth Based Wireless Home Automation i.e. Lights/Fans On/Off PROJECT KIT will be provided.                       FOR ANY QUERIES OR DOUBT PLEASE CONTACT US BEFORE ORDERING                                                                       E-MAIL:                                                                       MOBILE: +91- Regards, ROBOSOFT LABS                                                                  

Medium Size: (Mens 5.5-7) (Womens ) ThermaCELL Heated Insoles ProFLEX are the extended solution to cold feet. These wireless, battery-powered insoles easily slip into your own boots or shoes. The included fingertip remote control lets you choose the heat setting. Plus, with extra rechargeable/removable batteries (sold separately), your feet stay warm all day. Wireless Remote controlled – fingertip control of heat without removing your footwear 3 heat settings:  medium heat  (100˚ F),  high heat   (111˚ F), and  no heat Rechargeable, removable batteries (2 included) Battery charges

Syska 5 W built in speaker smart Sonic LED bulb - 3 million shades in one ! This smart light Sonic LED bulb has built in speaker, you can play songs via your smart phone. It uses LED & wireless technology to deliver infinite possibilities at y Product Description 5W & Lumens: 500 Wireless Range: 10 m Inbuilt Speaker with superior sound 3 Million Colour Options Dimmable Colour & White Light App controlled (iOS 6 & above, android 4.3 & above) smart bulb Base: E27 (Pendant Included- Holder) Syska Sonic LED App Functions: Play Music Colour ''Pick'' Feature, Interactive Games, Call/SMS Detect, Schedule Sync The Syska Smartlight Sonic bulb is simple to install & use, provides significant energy savings up to 70 %

The IREXT2 Wireless IR Extender Kit lets you extend an Infrared signal from a remote control by up to 330ft (100m). Using a radio frequency that can operate through walls, doors, and around corners, the remote control extender lets you control your A/V devices, set top boxes, tatasky etc.from greater distances or even from another room. This adds configuration versatility for multi-room or outdoor applications, without having to move within range of your remote controlled device. The remote control extender is comprised of two units - one local IR remote extender, which accepts the incoming IR signal from the remote control and wirelessly transmits it to the second IR remote control Max Distance 100 m / 330 ft Frequency Range IR: kHz Frequency MHz +/-1 MHz Physical Characteristics Product Length 3.7 in [95 mm] Product Width 2.6 in [67 mm] Product Height 1.4 in [35.3 mm] Product Weight 2.3 oz [65 g] Power Power Source 2 AC Adapters Included Input Voltage AC Input Current 0.2A Output Voltage 12 DC Output Current 0.2A Environmental Operating Temperature 0°C to 43°C (32°F to 109°F) Storage Temperature -20°C to 60°C (-4°F to 140°F) Packaging Information Shipping (Package) Weight 1.1 lb [0.5 kg] What's in the Box Included in Package 1 - IREXT transmitter 1 - IREXT receiver 1 - IR extender probe 2 - Power Adapter 1 - Instruction Manual