Usb controlled relay module

1 Channel USB Powered Relay Module is great for controlling your devices through USB without any USB protocol knowledge. This modules plugs

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc....   ***(Work with All Analog/Digital circuits with signal from 3V to 15V) *** Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 3.3v and 5v micro controller  (Check Other Listings  for  1.8V-5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 3V to 16V(1.5V to 16V for 1.8V logic) with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 3.3V and 5V micro controllers/Digital (1.8V Version also available Please Check My other Listings).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

See our ratings Add this shop to my favorites Serial TTL Controlled 4 Channel Relay Module: Control by ASR-M08-A Voice Board Module or Bluetooth ₹ Availability:

New Improved 4 Channel IR Remote Control Board (Ideal for DIY Projects,Home/Office Automation) ** Firmware IC (IR-4 8PIN-DIP Check Circuit)  with IR  Remote Control (battery included) and IR receiver is available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Applications: Applications include Garage door controllers, Car door controllers,Robotics Control switching of lights & fans (on & off) at homes, offices, shops, hotels by remote. Switching motors on & off. IR remote control projects Can easily replace switches with IR remote Features: Brand New and High Quality Restore Last Relay Position when Power   Relay contacts are brought out as Screw Terminal Each relays can Switch ON or OFF individually Can be used directly to control 240V power appliances Perfect for switching 240V appliances like Lights, Fans, etc remotely using IR remote. Receiver operates from 12V AC or DC power supply (not included) High Quality PCB that can easily be mounted inside regular switchboard   ON/OFF by using single button   Remote control Key1    -> Relay 1 ON/OFF   Remote control Key2    -> Relay 2 ON/OFF   Remote control Key3    -> Relay 3 ON/OFF   Remote control Key4    -> Relay 4 ON/OFF   Remote control MUTE  -> ALL Relay OFF   Remote control PLAY   -> ALL Relay ON   Remote control VOL+   -> Enable Buzzer   Remote control VOL -   -> Disable Buzzer ** Programmed Receiver IC (IR-4 8PIN DIP) with IR  Remote Control (battery included) available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Package Contents: 1 x 4 Channel IR Relay Board 1 x Remote Control (battery included)

We offer a large selection of single channel to multi-channel Relay Drivers for applications ranging from low power signal switching to high voltage, high current applications.  Quad channel relay controller we have a configuration to fit every need.  Quad channel relay can be controlled by feeding 2 to 5 V TTL from Micro-controller Development Boards, Remote Receivers, or any other circuit which required isolated high current and high voltage switching by applying TTL voltage.  LED indication for Relay On/Off, Relay Output normally open and normally close via screw terminal for easy connection.  Clamp diodes for current limiting for self-protections.  Input via berg connector.  Board can control AC or DC load.       Input supply 12 VDC @ 170 mA     Output four SPDT relay     Relay specification 5 A @ 230 VAC     Trigger level 2 ~ 5 VDC     Berg pins for connecting power and trigger voltage     LED on each channel indicates relay status     Screw terminal connector for easy relay output and aux power connection     Four mounting holes of 3.2 mm each

New Improved 4 Channel IR Remote Control Board (Ideal for DIY Projects,Home/Office Automation) ** Firmware IC (IR-4 8PIN-DIP Check Circuit)  with IR  Remote Control (battery included) and IR receiver is available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Applications: Applications include Garage door controllers, Car door controllers,Robotics Control switching of lights & fans (on & off) at homes, offices, shops, hotels by remote. Switching motors on & off. IR remote control projects Can easily replace switches with IR remote Features: Brand New and High Quality Restore Last Relay Position when Power   Relay contacts are brought out as Screw Terminal Each relays can Switch ON or OFF individually Can be used directly to control 240V power appliances Perfect for switching 240V appliances like Lights, Fans, etc remotely using IR remote. Receiver operates from 12V AC or DC power supply (not included) High Quality PCB that can easily be mounted inside regular switchboard   ON/OFF by using single button   Remote control Key1    -> Relay 1 ON/OFF   Remote control Key2    -> Relay 2 ON/OFF   Remote control Key3    -> Relay 3 ON/OFF   Remote control Key4    -> Relay 4 ON/OFF   Remote control MUTE  -> ALL Relay OFF   Remote control PLAY   -> ALL Relay ON   Remote control VOL+   -> Enable Buzzer   Remote control VOL -   -> Disable Buzzer ** Programmed Receiver IC (IR-4 8PIN DIP) with IR  Remote Control (battery included) available for Rs.275(Free Shipping) ***.       Have any queries, Please contact through by clicking "Ask seller a question" Package Contents: 1 x 4 Channel IR Relay Board 1 x Remote Control (as per new shipping policy from FedEx battery cannot include for power ship orders, all non power ship orders battery included)

5V 2 Channel Relay with Optocoupler Description This is a 2-Channel Relay interface board, which can control various appliances, and other equipments. It can be controlled directly by Microcontroller.   Rated voltage: DC12   Rated current: 10A   Coil power: 0.36W  Contact switch voltage: 220VAC  Protective characteristics: Sealed   Contact load: Medium-power  Application: Electromagnetism  Contact Form: Conversion type With 4 mounting holes, diameter of each hole is 3.1mm, easy to install  Apply superior SONGLE relay, SPDT(single-pole double-throw), one common port, one NO and one NC  Opto-isolator, excellent anti-interference performance Low level actuation(indicator ON), high level release(indicator OFF) Maximum output of relay: DC 30 Package Info 1Pc X 5V 2 Channel Relay with Optocoupler Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review please have a look. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard 24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

Product Description: ·          5V 4-Channel Relay interface board ·          IC based  switching ·           Supply 12V DC and 5 V DC for control. ·           High power relays for each channel: 250V 10A AC ·           Indication LED for each output  Standard interface that can be controlled directly by micro controller (Arduino, , AVR, PIC, DSP, ARM)   Application: Application for automation  purpose Package contain: 1 X 4-Channel Relay interface   = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers,  such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc.... ***(Work with All Analog/Digital circuits with signal from 1.5V to 15V) ***   Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 1.8V,3.3v and 5v micro controller  (Check Other Listings  for  3.3V,5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 1.5V to 16V with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 1.8V, 3.3V and 5V micro controllers/Digital).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

Description: Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two Two on-board relay which can switch up to 7Amps. Relays terminals (COM, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free-wheeling diode which will further protect your microcontroller from relay kick back. This is a 5V 2-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.    Features: 1.     Equipped with high-current relay 7A@250VAC / 10A@24VDC.  2.     It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc. 3.     High quality screw terminals (Terminal Block) provided (COM, NC, NO) for quick and easy connection. 4.     Free wheeling diode to protect your microcontroller. 5.     Input Signal Pin connected to Burg stick for easy accessibility. 6.     LED Status indicators to indicate the relay ON/OFF status. 7.     Mounting holes provided. Package Contains: 1.      1 x Two channel 5V relay Module.    

Features: Brand new and high quality. This module can be used with Special Sensor Shield V4.0. You can do some simple design about it. This is 2-Channel 5V Relay Module for PIC ARM AVR DSP. It can be able to control various appliances, and other equipments with large current. Easy to be controlled by a lots of Microcontrollers. Just use 5v input signal to control. Equiped with high-current relay, AC250V 10A, AC150V 10A; DC30V 10A, DC28V 10A. size:3.9cm x 5.1cm (1.54inch x 2.01inch).   Package contents: 1 x   5V 10A   2-Ch  Relay Board Module FEED BACK We request buyers to leave all star feedback if satisfied and if not satisfied they can communicate and contact us so we can take appropriate action.     Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback      Your feedback is important for us to grow our business on , so please do leave feedback

Description 100% brand new and high quality Please make sure the power supply is not more than 5.5V and please don't do reverse polarity for "+" and "-", or else, it will burn the board Specification Color: as picture show Size: 29mm x 20cm Net weight: 10 g working voltage:- 2.5V-5.5V Maximum output power: 3W*2(5V 4O)   Package Contents: 1 x 2-Channel 5V Relay Module Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

1 Channel Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino This is a  1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).   Features: 1 -Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250 V AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size R elay status indicator LED (red) Weight ： 10 0 g   Module interface specifications (3 wire)   1. External 12V 2. GND external GND 3. 1N interchange relay control interface (Control by 3.3V or 5V Logic)   Package included:   1 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 10 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 1 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.