X atmel

Hurry Up!!!!  W eekend offer only for 2 days Description: Latest UNO Bootloader. 16 Mhz operation. Package contain: 1 X ATmega328-PU with Arduino UNO bootloader

5Pcs x New Original Atmel Atmega8L/A Microcontroller for Electronics Projects Most Widely Used Microcontroller Easy to Program via USBASP Programmer Features • High-performance, Low-power Atmel8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16MIPS Throughput at 16MHz – On-chip 2-cycle Multiplier • High Endurance Non-volatile Memory segments – 8KBytes of In-System Self-programmable Flash program memory – 512Bytes EEPROM – 1KByte Internal SRAM – Write/Erase Cycles: Flash/ EEPROM – Optional Boot Code Section with Independent Lock Bits • In-System Programming by On-chip Boot Program • True Read-While-Write Operation – Programming Lock for Software Security • Atmel QTouch® library support – Capacitive touch buttons, sliders and wheels – Atmel QTouch and QMatrix acquisition – Up to 64 sense channels • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter withSeparate Oscillator – Three PWM Channels – 8-channel ADC

5Pcs X New Original Atmel AT89S52 Microcontroller for Electronics Projects Most Widely Used Microcontroller Features • Compatible with MCS-51Products • 8K Bytes of In-System Programmable (ISP) Flash Memory – Endurance: Write/Erase Cycles • 4.0V to 5.5V Operating Range • Fully Static Operation: 0 Hz to 33 MHz • Three-level Program Memory Lock • 256 x 8-bit Internal RAM • 32 Programmable I/O Lines • Three 16-bit Timer/Counters • Eight Interrupt Sources • Full Duplex UART Serial Channel • Low-power Idle and Power-down Modes • Interrupt Recovery from Power-down Mode • Watchdog Timer • Dual Data Pointer • Power-off Flag • Fast Programming Time • Flexible ISP Programming (Byte and Page Mode) Package Includes: 5Pcs X New Original Atmel AT89S52 Micro controller  for Electronics Projects

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, 5Pcs Set - New Original Atmel Atmega8A Microcontroller for Electronics Projects Most Widely Used Microcontroller Amongst Hobbyist Easy to Program via USBASP Programmer Features • High-performance, Low-power Atmel8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16MIPS Throughput at 16MHz – On-chip 2-cycle Multiplier • High Endurance Non-volatile Memory segments – 8KBytes of In-System Self-programmable Flash program memory – 512Bytes EEPROM – 1KByte Internal SRAM – Write/Erase Cycles: Flash/ EEPROM – Optional Boot Code Section with Independent Lock Bits • In-System Programming by On-chip Boot Program • True Read-While-Write Operation – Programming Lock for Software Security • Atmel QTouch® library support – Capacitive touch buttons, sliders and wheels – Atmel QTouch and QMatrix acquisition – Up to 64 sense channels • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter withSeparate Oscillator – Three PWM Channels – 8-channel ADC

AVR USB Programmer with case USBasp USBISP for ATMEL ATmega ATtiny microcontrollers. Painless AVR controller programming   Product Description: Main Features: ·         Brand new and high quality ·         Support for Linux, Mac OS X and Windows ·         5 KB/sec maximum write speed. ·         10 pin ISP interface. ·         Can be used with Khazama, AVRDUDE, PonyProg and other ·          Support for AVRDUDE from version 5.2 onwards   Supported devices: Mega Series: ATmega8 – ATmega48 – ATmega88 – ATmega168 – ATmega328 – ATmega103 – ATmega128 – ATmega – ATmega – ATmega16 – ATmega161 – ATmega162 – ATmega163 – ATmega164 – ATmega169 – ATmega – ATmega – ATmega32 – ATmega324 – ATmega329 – ATmega – ATmega64 – ATmega640 – ATmega644 – ATmega649 – ATmega – ATmega – ATmega Tiny Series ATtiny12 – ATtiny13 – ATtiny15 – ATtiny25 – ATtiny26 ATtiny45 – ATtiny85 – ATtiny   Classic Series AT90S – AT90S – AT90S – AT90S – AT90S AT90S – AT90S – AT90S AT90S  CAN Series AT90CAN128 PWM Series AT90PWM2 – AT90PWM3 Package includes: ·         1 x USB AVR Programmer with case ·         1 x 10-pin programming cable ·         A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, 5Pcs Set - New Original Atmel AT89C51 Microcontroller for Electronics Projects Most Widely Used Microcontroller Amongst Hobbyist Features • Compatible with MCS-51Products • 4K Bytes of In-System Reprogrammable Flash Memory – Endurance: Write/Erase Cycles • Fully Static Operation: 0 Hz to 24 MHz • Three-level Program Memory Lock • 128 x 8-bit Internal RAM • 32 Programmable I/O Lines • Two 16-bit Timer/Counters • Six Interrupt Sources • Programmable Serial Channel • Low-power Idle and Power-down Modes Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, 5Pcs Set - New Original Atmel AT89C Microcontroller for Electronics Projects Most Widely Used Microcontroller Amongst Hobbyist Features • Compatible with MCS-51Products • 2K Bytes of Reprogrammable Flash Memory – Endurance: Write/Erase Cycles • 2.7V to 6V Operating Range • Fully Static Operation: 0 Hz to 24 MHz • Two-level Program Memory Lock • 128 x 8-bit Internal RAM • 15 Programmable I/O Lines • Two 16-bit Timer/Counters • Six Interrupt Sources • Programmable Serial UART Channel • Direct LED Drive Outputs • On-chip Analog Comparator • Low-power Idle and Power-down Modes • Green (Pb/Halide-free) Packaging Option Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, CNB Pc Set New Original Atmel AT89C Microcontroller for DIY Projects Most Widely Used Microcontroller Amongst Hobbyist Features • Compatible with MCS-51Products • 4K Bytes of Reprogrammable Flash Memory – Endurance: Write/Erase Cycles • 2.7V to 6V Operating Range • Fully Static Operation: 0 Hz to 24 MHz • Two-level Program Memory Lock • 128 x 8-bit Internal RAM • 15 Programmable I/O Lines • Two 16-bit Timer/Counters • Six Interrupt Sources • Programmable Serial UART Channel • Direct LED Drive Outputs • On-chip Analog Comparator • Low-power Idle and Power-down Modes • Green (Pb/Halide-free) Packaging Option Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

1 x UNO R3 MEGA328P ATMEGA16U2 board                       +  1 x USB cable  + 1 Plastic Carry Box  Product Description: 100% Brand New,  It is based on  MEGA328P Chip with 16U2 (UNO R3) feature,high quality clone. ATMEGA16U2 MEGA328P  UNO R3 Color of USB Cable: blue Transparent Plastic Carry Box   Package Include: 1 x UNO R3 MEGA328P ATMEGA16U2 board +  1 x USB cable + 1 Plastic Carry Box   Performance description: Digital I/O Digital input/output terminal, a total of 0 ~ 13. Analog I/O Analog input/output terminal, a total of 0 ~ 5. Support the ISP download function. The input voltage: when connected to the computer USB without external power supply, external power supply 5 v ~ 9 v dc voltage input. Output voltage: 5 V dc voltage output and 3.3 V dc voltage output. Using Atmel Atmega328 microprocessor controller. Payment Options:   Payment by PaisaPay only, Safest payment mode on .  Terms and Conditions: Orders are expected to be shipped within 2 days of receiving cleared payment  excluding holidays.. Shipping details will be emailed to you after the item is shipped and then you can track your order. No Address change entertained once the order is placed. Please refuse to accept the package from courier if its

CP Module Description: Name: CP, USB to TTL Module Baud Rate Range: Mbps Control chip: CP Working voltage: 4V-5.25V Support: Windows 98SE, , XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40 Output voltage: Dual voltage output (3.3V and 5V) Output indicator: Power indicator, TXD indicator Output current: 100mA (with current limiting protection) 6 Pins for: RST TXD RXD GND 5V 3.3V   Pro Mini description: 1.14 Digital input / output ports RX, TX D13, D2 ~~ of, 2 or 8 analog input port A0 to A7 3. The TTL level serial transceiver port RX / TX 4.6 PWM ports, D3,, D5, D6, D9, D10, D11. Using Atmel Atmega328P-AU microcontroller supports serial download 7. Support for external 3.3V ~ 12V DC power supply 8. Support 9V battery-powered the 9 clock frequency 8MHz 10. Dimensions: (mm)   Package Included: 1 X CP X Arduino Pro mini

This is a great module if you want to add an internet connection to your microcontroller projects. The board is based off of the popular ENC28J60 IC and handles most Ethernet network protocol requirements. Ethernet LAN Module for PIC/Atmel AVR/Arm ENC28J60-I/SO Ethernet chip module Network Interface: HanRun HRA Supply Voltage: 3.3 V Size: 50mm x 33mm x 18mm

Pro Mini electronic building blocks Interactive Media ATMEGA328P 5V/16M for arduino Compatible Nano Mini Pro is a microcontroller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), Eight analog inputs, a 16MHz resonator, a reset button, mounting hole pin head. Technical parameters: 14 Digital input / output port: RX, TX, D2 – D13 8 analog inputs: A0 – A7 1 pairs of ports TTL level serial transceiver: RX / TX 6 PWM ports: D3, D5, D6, D9, D10, D11 Using Atmel AtMega328P-AU MCU Support serial download Support for external 3.3V – 12V DC power supply Support 9V battery supply Clock frequency: 16MHz Size: 33.3 x 18.0 mm   Note: If uploading sketches using the Arduino IDE and selecting the corresponding Pro Mini board fails, follow these steps to update the bootloader: Prepare an Arduino Uno, Mega or similar to act as ISP as described at http://arduino.cc/en/Tutorial/ArduinoISP Wire it up as shown

Mini Pro is a microcontroller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), Eight analog inputs, a 16MHz resonator, a reset button, mounting hole pin head. Technical parameters: 14 Digital input / output port: RX, TX, D2 – D13 8 analog inputs: A0 – A7 1 pairs of ports TTL level serial transceiver: RX / TX 6 PWM ports: D3, D5, D6, D9, D10, D11 Using Atmel AtMega328P-AU MCU Support serial download Support for external 3.3V – 12V DC power supply Support 9V battery supply Clock frequency: 16MHz Size: 33.3 x 18.0 mm   Note: If uploading sketches using the Arduino IDE and selecting the corresponding Pro Mini board fails, follow these steps to update the bootloader: Prepare an Arduino Uno, Mega or similar to act as ISP as described at http://arduino.cc/en/Tutorial/ArduinoISP Wire it up as shown

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino     Product information Features:   Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,  VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g Shipping content: 1x Micor SD TF Card Shield Expansion Board for Arduino/PIC/ATMEL

USBasp is an USB in-circuit burner/programmer for Atmel controllers. It’s supportable with all of the platforms like Windows, Linux and Mac OS X. This programmer doesn’t need any USB controller or component. Burning speed is up to 5KB/sec. (Image is only for indicative purpose, original product may differ slightly from the image)