Analog temperature sensor module

4Pin Digital Thermal Thermistor Temperature Sensor Module For Arduino Features: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are  Indian speed post   Feedback: ·         In case you find any problem

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

See our ratings Add this shop to my favorites MLX Contactless Temperature Sensor Module ₹ Availability:

See our ratings Add this shop to my favorites Thermistor Thermal Temperature Sensor Module ₹ Availability:

Description 100% brand new and high quality Using the NTC thermistor sensor, good sensitivity The comparator output signal clean waveform is good, driving ability, than 15mA Adjust the temperature distribution bit detection threshold Using a wide voltage LM393 comparator With bolt holes for easy installation Module Usage The thermal resistance of the module is very sensitive to the ambient temperature and is generally used to detect the ambient temperature Through the adjustment of the potentiometer one can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

  Description Package Includes: 1 Piece new  GY-906 MLX90614ESF Infrared measuring temperature sensor module  KG310 Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

LOWEST PRICE IN   e b a y 10 TIMES MORE RELIABLE THAN OTHER CHINESE MODULE BEST FOR YOUR ROBOT / INDUSTRIAL  PURPOSE  /HOME & AUTOMATION 1 MONTHS REPLACEMENT WARRENTY IN CASE OF ANY PROBLEM DUE TO MANUFACTURING DIFFECT 4 Types of sensor Thermal, Magnetic, Flame & Light Sensor Module All modules have Four Pin 2 For Power & 2 For Output Digital & Analog. Also Have Output Led Indicator. Package Content Total 4 items 1 x Flame sensor module 1x Thermal Sensor Module 1x Digital Light Sensor Module 1x Magnetic Field Sensor Module Description: Thermal Sensor Module: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

LM35D Digital temperature sensor linear analog output module DC4-30V Digital temperature sensor LM35D module cables free   Product Description:   ·         100% brand new and high quality ·         Low power consumption, less than 60uA ·         low output impedance, 1mA current through only 0.1 Ohm ·         screw holes for easy installation and fix. Aperture 2.6mm ·         LM35D operates with a wide range of voltage 4-30V ·         linear analog output

Uses:Humidity detection, humidity sensors, humidity detection the working voltage 3.3V-5V the output form: DO digital switching outputs (0 and 1) and AO analog voltage output the comparator output signal is clean, good waveform, driving ability, more than 15mA a small PCB board size: 3.2cm x 1.4cm Module Features:  1, using high-quality HR202 humidity sensor;  2, the comparator output signal is clean, good waveform, driving ability, more than 15mA;  3, adjust the temperature distribution position detection threshold;  4, the working voltage 3.3V-5V;  5, the output form: DO digital switching outputs (0 and 1) and AO analog voltage output;  6, a fixed bolt holes for easy installation;  7, a small PCB board size: 3.2cm x 1.4cm;  8, using a wide voltage LM393 comparator.  Product wiring instructions:  1, VCC positive power supply 3.3-5V  2, GND power supply is negative  3, DO TTL switching signal output  4, AO small plates analog output (voltage signal)  Module for use  1, the humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity;  2, by adjusting the potentiometer, for detecting the humidity can change the threshold (i.e. the humidity control), such as the need to control the ambient humidity of 60%,then the corresponding module is transferred to the green light and humidity environment, DO high power output when flat, humidity values below this setting, high output, the green light does not shine;  3, DO output can be directly connected to the microcontroller through the microcontroller to detect high and low, thereby detecting the humidity changes

BRAND NEW High quality Rain drops Detection sensor module/ weather/ Humidity sensor for arduino        Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free Dupont cables Shipping through BlueDart/Aramex/FedEx                                   For more information on our products and shipping please email us at Please note that All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items. These are imported electronic items and can easily get damaged by mishandling or wrong connections. Please Buy only if you can understand the product and its working well. We do not give any documents or connection diagram along with the product. All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

BRAND NEW High quality  Rain drops Detection  sensor module/ weather/  Humidity sensor  for arduino         Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free  Dupont cables

DESCRIPTION DHT11 Temperature Relative Humidity Sensor Module For Arduino Feature: Can detect surrounding environment of the humidity and temperature DHT11 sensor adopts Humidity measurement range: % Humidity measurement error: +/- 5% Temperature measurement range: 0 C ~ 50 C Temperature measurement error: +/- 2 C Working voltage 3.3V ~ 5V Output mode: digital output Has fixed bolt hole and easy installation PCB size: 3.1 x 1.4cm Package included: 1 x DHT11 Temperature Relative Humidity Sensor Module We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is V (5 V / ), and the input voltage of this module should be more than V x V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC V-25 V Voltage analog resolution: V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x 5 = 16.5 V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is 0.00489 V (5 V / 1023), and the input voltage of this module should be more than 0.00489 V x 5 = 0.02445 V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC0.02445 V-25 V Voltage analog resolution: 0.00489 V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order