Hall sensor module

Description These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously over extended temperatures to +150° C, and are more stable with both temperature and supply voltage changes.  The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.  The four basic devices (, and ) are identical except for magnetic switch points. Each device includes a voltage regulator for operation with supply voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic Hall-voltage generator, temperature compensation circuitry, small-signal amplifier, Schmitt trigger, and an open-collector output to sink up to 25 mA.  With suitable output pull up, they can be used with bipolar or CMOS logic circuits.  The A- and A- are improved replacements for the UGN/UGS-; the A- is the improved replacement for the UGN/UGS-. True solid state Operates with stationary input (zero speed) No moving parts Logic compatible input and output Highly repeatable operation Immune to dirt In the Hall-effect sensor on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection. Technical parameters: 4.5 V to 24 V Operation Needs Only An Unregulated Supply Open-Collector 25 mA Output Compatible with Digital Logic High speed operation - over 100 kHz possible Broad temperature range (-40 to +150°C) PIN-OUT DIAGRAM: Package Includes: 1 Piece new  HALL Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously over extended temperatures to +150° C, and are more stable with both temperature and supply voltage changes.  The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.  The four basic devices (3141, 3142, 3143, and 3144) are identical except for magnetic switch points. Each device includes a voltage regulator for operation with supply voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic Hall-voltage generator, temperature compensation circuitry, small-signal amplifier, Schmitt trigger, and an open-collector output to sink up to 25 mA.  With suitable output pull up, they can be used with bipolar or CMOS logic circuits.  The A3141- and A3142- are improved replacements for the UGN/UGS3140-; the A3144- is the improved replacement for the UGN/UGS3120-. True solid state Operates with stationary input (zero speed) No moving parts Logic compatible input and output Highly repeatable operation Immune to dirt In the Hall-effect sensor on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection. Technical parameters: 4.5 V to 24 V Operation Needs Only An Unregulated Supply Open-Collector 25 mA Output Compatible with Digital Logic High speed operation - over 100 kHz possible Broad temperature range (-40 to +150°C) PIN-OUT DIAGRAM: Package Includes: 1 Piece new  HALL Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

ACSA hall current sensor module for arduino ARM, AVR, PIC and other MCU With on board power indicator Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description:   The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.  ·         The current sensor chips: ACS712ELC-30B; ·         Pin 5V power supply, on-board power indicator; ·         The module can measure plus or minus 30 amps, corresponding to the analog output of 185 mV / A; ·         If there is no the detection current through, the output voltage is VCC / 2 ·         PCB board size: 31 (mm) x13 (mm); ·         Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!   Package Include:   ·         1 x     ACSA current sensor   Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

ACSA hall current sensor module for arduino ARM, AVR, PIC and other MCU With on board power indicator   Product Description:   The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.  ·         The current sensor chips: ACS712ELC-30B; ·         Pin 5V power supply, on-board power indicator; ·         The module can measure plus or minus 30 amps, corresponding to the analog output of 185 mV / A; ·         If there is no the detection current through, the output voltage is VCC / 2 ·         PCB board size: 31 (mm) x13 (mm); ·         Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!   Package Include:   ·         1 x     ACSA current sensor   Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

1, on-board LM393 voltage comparator chip and hall sensing probe 2, support 5 V  3, on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection 4, signal detection sensitivity can adjust 5, reserve all the way more circuits (P3 voltage drawn) 6, PCB board size: 30 (mm) x15 (mm) Package Including Hall switch sensor module  x 1 SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

LOWEST PRICE IN   e b a y 10 TIMES MORE RELIABLE THAN OTHER CHINESE MODULE BEST FOR YOUR ROBOT / INDUSTRIAL  PURPOSE  /HOME & AUTOMATION 1 MONTHS REPLACEMENT WARRENTY IN CASE OF ANY PROBLEM DUE TO MANUFACTURING DIFFECT 4 Types of sensor Thermal, Magnetic, Flame & Light Sensor Module All modules have Four Pin 2 For Power & 2 For Output Digital & Analog. Also Have Output Led Indicator. Package Content Total 4 items 1 x Flame sensor module 1x Thermal Sensor Module 1x Digital Light Sensor Module 1x Magnetic Field Sensor Module Description: Thermal Sensor Module: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

Tilt Sensor Module Tilt Switch Angle sensor Module Ball Switch Dumping Sensor Application: Tilt variety of products, dumping trigger an alarm, dumping off the sensor, tilt sensor. Tire Pressure Monitoring System (TPMS), bicycle lights, digital photo frame rotation, screen rotation, flip video camera, anti-theft system Module Features: using the highly sensitive switch SW-520D as the angle sensor. Comparator output signal clean waveform is good, driving ability, than 15mA. Working voltage 3.3V-5V Output format: Digital switching output (0 and 1) With bolt holes for easy installation Small plate PCB size: 3.2cm x 1.4cm Using a wide voltage LM393 comparator Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Infrared obstacle avoidance sensor module Tracing Module electrcal sensor for Arduino Robot project Module description: The sensor module on environment light adapted capacity strong, its has pair infra-red launches and receives tube, launches tube launches out must frequency of infra-red, dang detection direction encountered obstacles real (reflection surface) Shi, infra-red reflection back was receives tube receives, after compared device circuit processing zhihou, green indicates Lantern bright up, while signal output interface output digital signal (a low level signal), can through potentiometer knob regulation detection distance, effective distance range 2~30cm, work voltage for 3.3V-5V. The sensor’s detection range can be adjusted by potentiometer, with little interference, easy to assemble, easy to use features, can be widely used

4Pin Digital Thermal Thermistor Temperature Sensor Module For Arduino Features: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are  Indian speed post   Feedback: ·         In case you find any problem

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Uses:Humidity detection, humidity sensors, humidity detection the working voltage 3.3V-5V the output form: DO digital switching outputs (0 and 1) and AO analog voltage output the comparator output signal is clean, good waveform, driving ability, more than 15mA a small PCB board size: 3.2cm x 1.4cm Module Features:  1, using high-quality HR202 humidity sensor;  2, the comparator output signal is clean, good waveform, driving ability, more than 15mA;  3, adjust the temperature distribution position detection threshold;  4, the working voltage 3.3V-5V;  5, the output form: DO digital switching outputs (0 and 1) and AO analog voltage output;  6, a fixed bolt holes for easy installation;  7, a small PCB board size: 3.2cm x 1.4cm;  8, using a wide voltage LM393 comparator.  Product wiring instructions:  1, VCC positive power supply 3.3-5V  2, GND power supply is negative  3, DO TTL switching signal output  4, AO small plates analog output (voltage signal)  Module for use  1, the humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity;  2, by adjusting the potentiometer, for detecting the humidity can change the threshold (i.e. the humidity control), such as the need to control the ambient humidity of 60%,then the corresponding module is transferred to the green light and humidity environment, DO high power output when flat, humidity values below this setting, high output, the green light does not shine;  3, DO output can be directly connected to the microcontroller through the microcontroller to detect high and low, thereby detecting the humidity changes

BRAND NEW High quality Rain drops Detection sensor module/ weather/ Humidity sensor for arduino        Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free Dupont cables Shipping through BlueDart/Aramex/FedEx                                   For more information on our products and shipping please email us at Please note that All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items. These are imported electronic items and can easily get damaged by mishandling or wrong connections. Please Buy only if you can understand the product and its working well. We do not give any documents or connection diagram along with the product. All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

BRAND NEW High quality  Rain drops Detection  sensor module/ weather/  Humidity sensor  for arduino         Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free  Dupont cables

Soil moisture humidity detector sensor module soil hygrometer Soil moisture sensor for your plants   Product Description:   ·            100% Brand new and high quality ·            This is a simple water sensor can be used to detect soil moisture when the soil moisture deficit module outputs a high level, and vice versa output low. Use this sensor produced an automatic plant waterer device, so that the plants