Avr usb programmer

AVR USB Programmer with case USBasp USBISP for ATMEL ATmega ATtiny microcontrollers. Painless AVR controller programming   Product Description: Main Features: ·         Brand new and high quality ·         Support for Linux, Mac OS X and Windows ·         5 KB/sec maximum write speed. ·         10 pin ISP interface. ·         Can be used with Khazama, AVRDUDE, PonyProg and other ·          Support for AVRDUDE from version 5.2 onwards   Supported devices: Mega Series: ATmega8 – ATmega48 – ATmega88 – ATmega168 – ATmega328 – ATmega103 – ATmega128 – ATmega – ATmega – ATmega16 – ATmega161 – ATmega162 – ATmega163 – ATmega164 – ATmega169 – ATmega – ATmega – ATmega32 – ATmega324 – ATmega329 – ATmega – ATmega64 – ATmega640 – ATmega644 – ATmega649 – ATmega – ATmega – ATmega Tiny Series ATtiny12 – ATtiny13 – ATtiny15 – ATtiny25 – ATtiny26 ATtiny45 – ATtiny85 – ATtiny   Classic Series AT90S – AT90S – AT90S – AT90S – AT90S AT90S – AT90S – AT90S AT90S  CAN Series AT90CAN128 PWM Series AT90PWM2 – AT90PWM3 Package includes: ·         1 x USB AVR Programmer with case ·         1 x 10-pin programming cable ·         A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

FREE USB CABLE + & AVR USB ISP Programmer (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL     Product Overview   1.     About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

Features Flash Burner for AVR Series from ATMEL and Microcontrollers. Communication - USB Auto Erase before writing and Auto Verify after writing Freeware AVR GCC C Compiler ISP Programming Socket Connects through AVR DUDE USB Powered Device Support AT89s51, AT89s52, AT89s53, AT89s AT90S, ATMEGA, ATMEGA ATMEGA ATTINY AT90CAN - AT90PWM2,3 Package Contents Programmer BRD FREE USB Port Cable FREE 6 Burg Cable Female 2 Female Programmer Driver (will be sended through Email) Programming Software For AVR and . (will be sended through Email)

PACKAGE CONTAINS: 1. USBasp Programmer 2. 5x2 FRC Cable 3. USB Cable Supported microcontrollers include:  Mega Series ATmega8 ATmega48 ATmega88 ATmega168 ATmega328 ATmega103 ATmega128 ATmega ATmega ATmega16 ATmega161 ATmega162 ATmega163 ATmega164 ATmega169 ATmega ATmega ATmega32 ATmega324 ATmega329 ATmega ATmega64 ATmega640 ATmega644 ATmega649 ATmega ATmega ATmega Tiny Series ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26 ATtiny45 ATtiny85 ATtiny Setting up the XploreFlash Programmer Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it. Step 2: Download and install USB driver for the programmer. Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS) Step 4: Follow Step by step guide on using the programmer software XploreFlash program the micrcontroller. The GUI software will require.NET framework 2.0 or later please download and install it. For additional details and technical support visit the Xplore Flash page.

Detailed Product Description AVR Programmer With Serial Communication FEATURES: It is used to load the programme into AVR microcontroller through DB9 connector and FRC connector. It is used for serial communication. It contain Serial Cable,FRC Cable,Software CD. CONTENTS: 1 Programmer 1 FRC cable 1 Serial cable 1 Software CD

Mini pro high speed USB Bios programmer, Universal programmer for TL866 at best price available in ITservice. For a details call us @ or mail to Bios programmer and TL866 USB Universal Bios programmer with adapter USB cable CD. Suport over chips (Various serial and FLASH, EEPROM, SOP,PLCC,TSOP Encapst http://www.laptopmotherboard.in/high-speed-mini-pro -tl866-usb-universal-programmer-bios-programmer-with-adapter -usb-cable-cd-

Starter_AVR USB is introductory board for the AVR family of microcontrollers. The board has  Atmega32 MCU with UART bootloader,  hence no external programmer is required. Bootloader occupies approximates 2K Bytes of flash memory, remaining 30K Bytes can be used for user programming. Features Atmega32 MCU 32K bytes of In-System Self Programmable Flash Memory 1024 bytes EEPROM 2K bytes Internal SRAM 32 IO pins UART, SPI, JTAG and I2C support. Real Time Counter with Separate Oscillator Four PWM Channels**8-channel, 10-bit ADC 8 Single-ended Channels 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x USB Interface CP2102: for communicating with the host computer. LCD Interface: 16 characters, 2 lines Test Leds (2) and Switches(2) 5X2 ISP Programmer Connector Breakout for all Ports Breakout for +5v,Gnd and Vin Power Supply compatible with AC/DC adapters(9 to 12V DC, 1A). Physical Features Dimensions: 70mm X 90mm 1.6mm Glass Epoxy, FR4 PCB Wave Soldered. Downloads: Schematic Sample Code For more details, technical support and downloads visit the product page.

zipedit] UNIVERSAL AVR, AT90, ATINY USB PROGRAMMER 1 YEAR WARRANTY SAME DAY FAST AIR / SURFACE SHIPPING EASY TO USE ZIF SOCKET

KKmulticopter V5.5 controller blackboard Quadcopter + USB Programmer + Signal Distribution Board Description: The KKmulticopter is a KK flight controller board for remote control multicopters with 2,3,4 and 6 rotors. We get KKmulticopter to stablise the aircraft during flight. KK flight controller takes the signal from the three gyros on the board (roll, pitch and yaw) and feeds the information into the Integrated Circuit (Atmega IC). KK flight controller then processes the information according the the KK software and sends out control signal to the Electronic Speed Controllers (ESCs) which are plugged onto the board and also connected to the motors. Depending the signal from the IC the ESCs will either speed up or slow down the motors (and tilt the rear rotor with a servo

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, New Fast Microchip (PIC) Microcontroller USB Programmer PICKIT2 Clone + DIP Package Microcontroller Adopter ICD (In Circuit Debugger) With MCU Lock facility (Protect your code.hex files from being copied) PIC 18F series and 16F877A,16F84A,628A,16F72 etc. Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

Description Package Includes: 1 Piece new  PICKIT2 Microcontrolle r USB Programmer PIC KIT2 Burner It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  PICKIT2 Microcontrolle r USB Programmer PIC KIT2 Burner It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegant. The USB interface is achieved by using an atmega processor and the rest is done

Our top seller is back with a revision, the Ultra Development board has got a revision with enhanced features. A onboard USB to serial converter to connect directly to your laptop/computer, we have done away with the RS232. Also the board is more spacious with clear division among various peripherals.  We have designed this kit, so that a beginner can gradually build up from basics like LED blinking up to standard peripherals and communication protocols without having to change boards. We are shipping a USB AT89S series programmer with this board, for easy programming. T he entire kit is very affordable and we have solid 22 video tutorials to help you get started from architecture to interfacing all the on-board peripherals. Kit Contents: Development Board with following Modules, ICs and Interfaces USB Communication with CP Eight 5mm LEDs Eight Switches

This is programmer for  89  series microcontrollers like  89C51,C52,S51,S52,C,C  and such series from Atmel. Board also supports various 8 pin serial EEPROM ICs. ZIF socket enables easy insertion and removal of devices for programming. Programming is very fast and reliable since it is USB based. No external power required since it is powered from USB port itself. Features •     Supports  89C51,C52,S51,S52,C,C  series & serial EEPROM devices. •     Powered from USB port(No external power required). •     High speed writing (8kb flash file