Usb based avr atmel

9% Discount 31st March coupon code:  COUPONDUN9 1.     About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP  (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

Description: 1.  CH340G REPLACE FT232RL 2.  Operating Voltage(logic level):5V 3.  8 analog inputs ports:A0 ~ A Digital input / output ports:TX,RX,D2 ~ D PWM ports:D3, D5, D6, D9, D10, D pairs of TTL level serial transceiver ports RX / TX 8.  Using Atmel Atmega328P-AU MCU 9.  Support USB download and Power 10. Support for external 5V ~ 12V DC power supply 11. Support power supply by 9V battery     8 analog inputs ports:A0 ~ A7     14 Digital input / output ports:TX,RX,D2 ~ D13     6 PWM ports:D3, D5, D6, D9, D10, D11     1 pairs of TTL level serial transceiver ports RX / TX   Package include: 1pcs + 3 rows of pins = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

FREE USB CABLE + & AVR USB ISP Programmer (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL     Product Overview   1.     About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

1.      About USB AVR and AT89Sxx ISP Programmer   USB AVR and AT89Sxx ISP  (In System programming)  Programmer is low cost USB based programmer.There is no need to take out target micro controller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontroller. They quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

AVR USB Programmer with case USBasp USBISP for ATMEL ATmega ATtiny microcontrollers. Painless AVR controller programming   Product Description: Main Features: ·         Brand new and high quality ·         Support for Linux, Mac OS X and Windows ·         5 KB/sec maximum write speed. ·         10 pin ISP interface. ·         Can be used with Khazama, AVRDUDE, PonyProg and other ·          Support for AVRDUDE from version 5.2 onwards   Supported devices: Mega Series: ATmega8 – ATmega48 – ATmega88 – ATmega168 – ATmega328 – ATmega103 – ATmega128 – ATmega – ATmega – ATmega16 – ATmega161 – ATmega162 – ATmega163 – ATmega164 – ATmega169 – ATmega – ATmega – ATmega32 – ATmega324 – ATmega329 – ATmega – ATmega64 – ATmega640 – ATmega644 – ATmega649 – ATmega – ATmega – ATmega Tiny Series ATtiny12 – ATtiny13 – ATtiny15 – ATtiny25 – ATtiny26 ATtiny45 – ATtiny85 – ATtiny   Classic Series AT90S – AT90S – AT90S – AT90S – AT90S AT90S – AT90S – AT90S AT90S  CAN Series AT90CAN128 PWM Series AT90PWM2 – AT90PWM3 Package includes: ·         1 x USB AVR Programmer with case ·         1 x 10-pin programming cable ·         A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

USBtinyISP AVR ISP programmer for Arduin bootloader Product Description USBtinyISP is designed for AVR,based on USB connector's ISP download wire. Officially supported by Arduino IDE, we can burn Arduino bootloader onto chips, and practically program any Atmel AVR microcontroller by this powerful AVR ISP programmer. * Both 6-pin and 10-pin AVR-standard interfaces * 2 LEDs to indicate "USB/Power good" and "Busy" * USB powered         Steps to burn Arduino bootloader: 1. Download driver(http://blog.arduino.cn/wp-content/uploads//usbtinyisp-w32-driver-v112.zip), unzip and install 2. When you see “USBtinyISP AVR Programmer”

Features Flash Burner for AVR Series from ATMEL and Microcontrollers. Communication - USB Auto Erase before writing and Auto Verify after writing Freeware AVR GCC C Compiler ISP Programming Socket Connects through AVR DUDE USB Powered Device Support AT89s51, AT89s52, AT89s53, AT89s AT90S, ATMEGA, ATMEGA ATMEGA ATTINY AT90CAN - AT90PWM2,3 Package Contents Programmer BRD FREE USB Port Cable FREE 6 Burg Cable Female 2 Female Programmer Driver (will be sended through Email) Programming Software For AVR and . (will be sended through Email)

The Atmel  8-bit   AVR   RISC -based microcontroller combines 32 KB  ISP   flash  memory with read-while-write capabilities, 1 KB  EEPROM, 2 KB  SRAM, 23 general purpose I/O lines, 32 general purpose working  registers, three flexible timer/ counters  with compare modes, internal and external  interrupts, serial programmable  USART, a byte-oriented 2-wire serial interface,  SPI  serial port, 6-channel 10-bit  A/D converter  (8-channels in  TQFP  and  QFN / MLF  packages), programmable  watchdog timer  with internal  oscillator, and five software selectable power saving modes. The device operates between volts. The device achieves throughputs approaching 1  MIPS  per MHz. Key parameters [edit] PARAMETERS VALUE Flash 32 Kbytes RAM 2 Kbytes Pin Count 28 Max. Operating Frequency 20 MHz CPU 8-bit AVR # of Touch Channels 16 Hardware QTouch Acquisition No Max I/O Pins 26 Ext Interrupts 24 USB Interface No USB Speed No

1 Piece USB 2.0 to TTL UART Serial Converter Adapter for Arduino, AVR, ARM / Other MCU. Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details This is a USB to Serial Converter Module based on PL-HX IC Device Specifications Based on PL-HX IC 5 Pins - 3.3V, 5.0V, TXD, RXD, GND Can be used to program Arduino Pro Mini. Package Include 1 Piece USB 2.0 to TTL UART Serial Converter Adapter for Arduino, AVR, ARM / Other MCU 5 x Femalre to Femalre Jumper Wires (Note: Wire Colour May Vary) About Us We are a small company based

1 Piece USB 2.0 to TTL UART Serial Converter Adapter for Arduino, AVR, ARM / Other MCU. Order more than one piece to save shipping cost. You can contact us at +91 94625 64100 for any question or concern. Device Details This is a USB to Serial Converter Module based on PL-2303HX IC Device Specifications Based on PL-2303HX IC 5 Pins - 3.3V, 5.0V, TXD, RXD, GND Can be used to program Arduino Pro Mini. Package Include 1 Piece USB 2.0 to TTL UART Serial Converter Adapter for Arduino, AVR, ARM / Other MCU 5 x Femalre to Femalre Jumper Wires (Note: Wire Colour May Vary) About Us We are a small company based

PACKAGE CONTAINS: 1. USBasp Programmer 2. 5x2 FRC Cable 3. USB Cable Supported microcontrollers include:  Mega Series ATmega8 ATmega48 ATmega88 ATmega168 ATmega328 ATmega103 ATmega128 ATmega ATmega ATmega16 ATmega161 ATmega162 ATmega163 ATmega164 ATmega169 ATmega ATmega ATmega32 ATmega324 ATmega329 ATmega ATmega64 ATmega640 ATmega644 ATmega649 ATmega ATmega ATmega Tiny Series ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26 ATtiny45 ATtiny85 ATtiny Setting up the XploreFlash Programmer Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. Download and install it. Step 2: Download and install USB driver for the programmer. Step 3: Download and install XploreFlash GUI. (XploreFlash GUI is based on AVRDUDESS) Step 4: Follow Step by step guide on using the programmer software XploreFlash program the micrcontroller. The GUI software will require.NET framework 2.0 or later please download and install it. For additional details and technical support visit the Xplore Flash page.

USBASP USBISP AVR Programmer USB USBASP USBISP AVR Programmer USB These AVR programmers are based on  Thomas Fischl's USBasp design and connect to your computer's USB port. Not only are they quite compact (70x20mm), but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done

This is programmer for  89  series microcontrollers like  89C51,C52,S51,S52,C,C  and such series from Atmel. Board also supports various 8 pin serial EEPROM ICs. ZIF socket enables easy insertion and removal of devices for programming. Programming is very fast and reliable since it is USB based. No external power required since it is powered from USB port itself. Features •     Supports  89C51,C52,S51,S52,C,C  series & serial EEPROM devices. •     Powered from USB port(No external power required). •     High speed writing (8kb flash file

PRODUCT DESCRIPTION The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU   It is the first Arduino board based on a 32-bit ARM core microcontroller.  It has 54 digital input/output pins, 12 analog inputs, 4 UARTs, a 84 MHz clock, an USB OTG capable connection, 2 DAC, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.  On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started.  The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.  The Arduino Due can be powered via the USB connector or with an external power supply.  A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. Technical specs AVR Arduino microcontroller Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-16V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Output Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Length mm Width 53.3 mm Weight 36 g

         PRODUCT DESCRIPTION The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU   It is the first Arduino board based on a 32-bit ARM core microcontroller.  It has 54 digital input/output pins, 12 analog inputs, 4 UARTs, a 84 MHz clock, an USB OTG capable connection, 2 DAC, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.  On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started.  The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.  The Arduino Due can be powered via the USB connector or with an external power supply.  A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. Technical specs AVR Arduino microcontroller Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-16V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Output Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Length 101.52 mm Width 53.3 mm Weight 36 g