Color sensor detector

TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.  The TCS has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color.  Specifications Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency Power Down Feature Communicates Directly to Microcontroller S0~S1: Output frequency scaling selection inputs  S2~S3: Photodiode type selection inputs OUT Pin: Output frequency OE Pin: Output frequency enable pin (active low), can be impending when using Support LED lamp light supplement control Size: 28.4x28.4mm Recognition color principle of sensor To TCSD, when choose a color filter, it can allow only one particular color to get through and prevent other color. For example, when choose the red filter, Only red incident light can get through, blue and green will be prevented. So we can get the red light intensity. Similarly,when choose other filters we can get blue or green light. TCSD has four photodiode types. Red, blue, green and clear, reducing the amplitude of the incident light uniformity greatly, so that to increase the accuracy and simplify the optical. When the light project to the TCSD we can choose the different type of photodiode by different combinations of S2 and S3. Look at the form as follows. The TCS Color Sensor TCSD can output the frequency of different square wave (occupies emptiescompared 50%),different color and light intensity correspond with different frequency of square wave. There is a relationship between the output and light intensity. The range of the typical output frequency is 2HZ~500KHZ. We can get different scaling factor by different combinations of S0 and S1. Look at the form as follows. The TCS Color Sensor Connection Diagram The TCS Color Sensor If you want to turn on the LEDs on the board, you could connect the led pin to 5v or a digital pin to drive them.  

Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS3200 has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS3200 color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Features： Chip: TCS230 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Use bright white LED lights Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6 (mm) x 24.4 (mm) Package included: 1 x  TCS230 Color Recognition Sensor Detector

Description Features： Chip: TCS230 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Use bright white LED lights Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6 (mm) x 24.4 (mm) Package included: 1 x  TCS230 Color Recognition Sensor Detector

GY-31 TCS230 TCS Color Sensor Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.  • The TCS has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color.  • Single-Supply Operation (2.7V to 5.5V)  • High-Resolution Conversion of Light Intensity to Frequency  • Programmable Color and Full-Scale Output Frequency  • Power Down Feature  • Communicates Directly to Microcontroller  • S0~S1: Output frequency scaling selection inputs  • S2~S3: Photodiode type selection inputs  • OUT Pin: Output frequency  • OE Pin: Output frequency enable pin (active low), can be impending when using  • Support LED lamp light supplement control  • Size: mm Package Info 1 X Pc TCS230 TCS Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

TCS230 Color Sensor Description • Chip used: TCS230  • Input voltage: DC 3 ~ 5V  • Output frequency voltage: 0 ~ 5V  • Uses bright White LED  • Can be connected directly with Microcontroller  • Static detection of the measured object color  • Best detection distance: 10mm  • PCB size: 31.6 (mm) x 24.4 (mm Package Info 1 Pc X TCS230 Color Sensor Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Specifications: Chip used: TCS230 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Uses bright White LED Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6 (mm) x 24.4 (mm Package contents:  1 x TCS230 / TCS Color Sensor Module = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

Specifications: Chip used: TCS230 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Uses bright White LED Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6 (mm) x 24.4 (mm Package contents:  1 x TCS230 / TCS Color Sensor Module SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

PIR OCCUPANCY MOTION SENSOR DETECTOR AUTO ON OFF LIGHTS FANS WALL CEILING SWITCH  MRP Rs DEFINATELY BEST QUALITY PRODUCT WITH FREE SHIPPING NORMALLY SHIPPED VIA   BLUEDART, FEDEX, ARAMEX, DTDC S U M M E R   S P E C I A L   O F F E R SPECIAL OFFER JUST @ Rs.  660 MORE THAN 50% DISCOUNT 6 MONTHS WARRANTY INTERNATIONALLY RECOGNISED PRODUCT UPC/EAN CODE NUMBER:  This is an Infrared technology based automatic sensor switch, which can be widely used

Description Technical parameters:   Package Includes: 1 Piece new  MQ-8 Hydrogen Gas Detection Sensor Detector Module for Arduino AVR  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Technical parameters:   Package Includes: 1 Piece new  MQ-8 Hydrogen Gas Detection Sensor Detector Module for Arduino AVR  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

SPECIFICATIONS OF PIR SENSOR The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a domb shaped Fresnel lens. Product Features: Color: White + Green Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be Adjusted Working Voltage Range: DC 4.5V- 20V Current Drain: PACKAGE INCLUDE * 1 PCS  PIR SENSOR

MQ-7 gas sensor has high sensitity to Carbon Monoxide. The sensor could be used to detect different gases contains CO, it is with low cost and suitable for different application. Character: High sensitivity to Combustible gas

What is a PIR sensor?''' PIR sensors allow you to sense motion, almost always used to detect whether a human has moved