Color sensor

TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.  The TCS has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color.  Specifications Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency Power Down Feature Communicates Directly to Microcontroller S0~S1: Output frequency scaling selection inputs  S2~S3: Photodiode type selection inputs OUT Pin: Output frequency OE Pin: Output frequency enable pin (active low), can be impending when using Support LED lamp light supplement control Size: 28.4x28.4mm Recognition color principle of sensor To TCSD, when choose a color filter, it can allow only one particular color to get through and prevent other color. For example, when choose the red filter, Only red incident light can get through, blue and green will be prevented. So we can get the red light intensity. Similarly,when choose other filters we can get blue or green light. TCSD has four photodiode types. Red, blue, green and clear, reducing the amplitude of the incident light uniformity greatly, so that to increase the accuracy and simplify the optical. When the light project to the TCSD we can choose the different type of photodiode by different combinations of S2 and S3. Look at the form as follows. The TCS Color Sensor TCSD can output the frequency of different square wave (occupies emptiescompared 50%),different color and light intensity correspond with different frequency of square wave. There is a relationship between the output and light intensity. The range of the typical output frequency is 2HZ~500KHZ. We can get different scaling factor by different combinations of S0 and S1. Look at the form as follows. The TCS Color Sensor Connection Diagram The TCS Color Sensor If you want to turn on the LEDs on the board, you could connect the led pin to 5v or a digital pin to drive them.  

Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS3200 has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS3200 color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

GY-31 TCS230 TCS Color Sensor Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.  • The TCS has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color.  • Single-Supply Operation (2.7V to 5.5V)  • High-Resolution Conversion of Light Intensity to Frequency  • Programmable Color and Full-Scale Output Frequency  • Power Down Feature  • Communicates Directly to Microcontroller  • S0~S1: Output frequency scaling selection inputs  • S2~S3: Photodiode type selection inputs  • OUT Pin: Output frequency  • OE Pin: Output frequency enable pin (active low), can be impending when using  • Support LED lamp light supplement control  • Size: mm Package Info 1 X Pc TCS230 TCS Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

TCS230 Color Sensor Description • Chip used: TCS230  • Input voltage: DC 3 ~ 5V  • Output frequency voltage: 0 ~ 5V  • Uses bright White LED  • Can be connected directly with Microcontroller  • Static detection of the measured object color  • Best detection distance: 10mm  • PCB size: 31.6 (mm) x 24.4 (mm Package Info 1 Pc X TCS230 Color Sensor Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Specifications: Chip used: TCS230 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Uses bright White LED Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6 (mm) x 24.4 (mm Package contents:  1 x TCS230 / TCS Color Sensor Module = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

Specifications: Chip used: TCS230 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Uses bright White LED Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6 (mm) x 24.4 (mm Package contents:  1 x TCS230 / TCS Color Sensor Module SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

hello all customersssss   my all items cash on delivery available please check your area [call customer support ]   marketing by patel groupe     all india fast service whatsaap & call any time  1] ,   2]                  Your  Favorite Seller is Now  P o w e r s e l l e r, Thanks to all My Customers   Description: 100% brand new and high quality Material: Leaf: Plastic,Mushroom: Silicon Color: whit and as a picture show [as per available] Light color: Light color changes among some colors randomly LED technology applied Light brightness will change automatically according to light source brightness: the darker the light source, the brighter the lights Extremely low power consumption (ONLY 0.5W) Pot made from ceramic imitation: smooth, glossy, lightweight and shatter-resistant Ideal desk lamp, decoration light, night light, bedside lamp, gift Light type: LED Light color: Light color changes among some colors randoml Leaf: Green Input voltage: 110V-220V Cinsumption: 0.5W Size: 53 Quantity: 1 Pc Note: The EU (I NDIAN)Plug is  standard ONLY!       Quantity:      [hellooooooooo sir please read]                        1 pcs auto  sensor night lamp   [color whit and pink as per available]                                                  limited offersssssssssssssss buy 2 get 1 pcs free [2 pcs order = 3 pcs auto sensor night lamp] buy 4 get 2 free [4 pcs order = 6 pcs auto sensor night lamp] buy 6 get 3 free [6 pcs order = 9 pcs auto sensor night lamp] 1  pcs order =  1 pcs 2  pcs order =  3 pcs 3  pcs order =  4 pcs 4  pcs order =  6 pcs 5  pcs order =  7 pcs 6  pcs order =  9 pcs Shipping will by PowerShip program BY BlueDart/  FedEx  only.   IMPORTANT NOTE        [please read sir]   The Courier Partner is Chosen Automatically   e B a y  Based   So Please Co-Operate With Us In Giving You the Best Service.          ADDRESS  CHANGE IS ALSO NOT POSSIBLE  AFTER PLACING THE ORDER                                              Provide Best Products at  G enuine rates at your Door step                         We will be provide technical support if you have any problems

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user New Car Parking Reverse  4 Sensors Backup Radar Rear System Alarm: BLACK  ONLY AVAILABLE 100% Brand New. Collision Avoidance System of Parking sensor is a safety aids that is used to be driving and parking. The system detects whether there is a obstacle through the Ultrasonic Sensor, indicates the direction and the distance of the obstacle via voice monitor, avoiding the costly backup collisions. Professional Car Parking Radar System for your beloved car  High quality, easy installation and operation 4 Sensor system for enhanced coverage and detection Waterproofing, Anti-frost, Anti-sand Centimeter-level precision detection Help to prevent dangerous and costly collisions Help to provide increased safety for passengers, pedestrians and family members who happen to be around the moving vehicle. Increase safety for pedestrians around the moving vehicle Detect small object and low walls as well A saw drill head included Specifications: Size of the control box: 8.8 x 5.6 x 2.5cm(Approx) Product Color: Silver, Black and White (After ordering you can send us mail about color preference) Detection distance: m Operating voltage: DC 12V(+-2v) Operating current: 20MA-30MA Ultrasonic frequency:40khz Working temperature: - degree Package Content: 1 x Induction Radar 1 x Main Control Box 4 x Parking Sensors with 2.4m Cable (Black / White / Silver- Please mail us which color you prefer) 1 x Saw drill head 1 x Power Cable 2 x Double Side Sticker 1 x User manual Terms & Conditions: 100% replacement No additional charges after purchase from e-Bay Delivery anywhere

SPECIFICATIONS OF PIR SENSOR The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a domb shaped Fresnel lens. Product Features: Color: White + Green Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be Adjusted Working Voltage Range: DC 4.5V- 20V Current Drain: PACKAGE INCLUDE * 1 PCS  PIR SENSOR

SPECIFICATIONS OF PIR SENSOR The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a domb shaped Fresnel lens. Product Features: Color: White + Green Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be Adjusted Working Voltage Range: DC 4.5V- 20V Current Drain: PACKAGE INCLUDE * 5 PCS  PIR SENSOR

Proximity Light Sensor  Power Button  Flex Cable Replacement for iPhone 4S        . Best quality,   Condition: 100% Brand New     . Compatible with APPLE IPHONE 4S PREMIUM QUALITY Proximity Light Sensor Power Button Flex Cable FOR APPLE   IPHONE 4S  “Buy With Confidence".   Description 100% Brand new and high quality Proximity Light Sensor Power Button Flex Cable Ribbon for iPhone 4S Replacing your original Proximity Light Sensor Power Button Flex Cable  Replacement and make your phone like new  All flex cables have been tested before ship. Color: Black Note: We recommend that this item is installed by a specially trained technician, and we will not accept liability for any damages that may be caused by the improper installation of this accessory.  Included 1 x Proximity Light Sensor Flex Cable for iPhone 4S SHIPPING:- All the item we are selling is available

SKU: BCHP006 HP Color LaserJet Pro MFP M176N Printer Feature:- Product Type: LaserJet Printers Print Technology: Laserjet Yield (No. Of Pages): Up to 20000 Pages Printing Output: Colored Technical Details;- GENERAL Print technology Laser Print colours Yes Functions Print, Copy, Scan Duty cycle (monthly, A4) Up to 20,000 pages Recommended monthly page volume 250 to 950 Duty cycle (monthly, letter) Up to 20,000 pages Mac compatible Yes PRINT Duplex printing Manual (driver support provided) Print speed color (normal, letter) Up to 4 ppm Print speed black (normal, letter) Up to 17 ppm Print speed black (normal, A4) Up to 16 ppm PROCESSOR Processor speed 600 MHz SCAN Scan resolution, hardware Up to 1200 x 1200 dpi Scan resolution, optical Up to 1200 dpi Levels of grayscale 256 Scan technology Contact Image Sensor (CIS) Bit depth 24-bit Scan input modes Scanning via HP LaserJet scan application or TWAIN—or WIA-compliant application software Color scanning Yes Scan size (flatbed), maximum 216 x 297 mm COPY Copy resolution (color text and graphics) Up to 300 x 300 dpi PAPER HANDLING Envelope feeder No Automatic paper sensor No Paper trays, standard 1 Paper trays, maximum 1 DISPLAY Display 2-line; 16-character monochrome LCD backlit display PAPER MEDIA Media weight, supported Cut sheet paper: 60 to 120 g/m² (Stretch Goal:-163g/m²); Envelopes: 60 to 90 g/m²; Post Cards: 135 to 176 g/m² (36 to 47 #); HP glossy media: 130 to 220 g/m² MULTITASKING SUPPORTED Multitasking supported Yes MACHINE DIMENTIONS & WEIGHT Package weight 18.2 kg CABLE INCLUDED Cable included Yes, 1 USB WHAT IS IN THE BOX What is

Apple iPad Black color with 64 GB, 3G, WiFi. 5MP primary camera with autofocus, face detection, backside illumination, five-element lens, and 1.2MP front facing camera. iOS operating system with dual core A5X processor and 64GB in-built memory.Size-9.7 Diagonal Music Player, Video Player, Three-axis gyro sensor, Accelerometer sensor, Ambient light sensor, E-mail

Features： Chip: TCS230 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Use bright white LED lights Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6 (mm) x 24.4 (mm) Package included: 1 x  TCS230 Color Recognition Sensor Detector

Description Features： Chip: TCS230 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Use bright white LED lights Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm PCB size: 31.6 (mm) x 24.4 (mm) Package included: 1 x  TCS230 Color Recognition Sensor Detector

Pulse sensor is used to test heart rate sensors, students, artists, athletes, creators, games or mobile terminal developers can develop heart-related and interactive works Sensor can be worn on the finger or earlobe, It also has an open-source app program, you can put your real-time heart rate displayed by the graph In essence, a heart rate sensor integrated optical amplifier and noise elimination circuit Specifications: Color:Red Material:FR4 Power Supply Voltage:3V/5V Magnification: 330 Wavelength: 609NM Product Weight:15g Package Dimensions:mm Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

MUST HAVE FOR STUDENTS  AND HOBBYIST *** Package include 1 X  Magnetic Sensor Module Module Size 1.75 X 1.4 inch Features: Sensor Module Apply to switchboard, duplicator, washing machine, refrigerator, camera, disinfector, electronic scale, juice level gauge, gas meter and water meter,Home Security System etc Specifications: With four fixed bolt hole for easy installation Operating voltage: 3.3 V-9 V Output Type: Digital switching output (0 and 1) Size: 1.75 x 1.4 inch Package weight:14 g Color:As shown

Features: No batteries and external power supply, it will illuminate after water flows down. Automatic light switching. 7 mixed-color are displayed automatically when water flow. ABS & Nickeling material, excellent corrosion resistance, durable. Transforming the stream of water into a beautiful waterfall of light. Brightness is such enough even no other lighting fixtures need. M24*1mm(2.4) screw thread with universal adapter: Easy to use, just need to connect the faucet light and the LED light sensor with the adapter, it can work normally. Ideal for bathroom to make it more fantastic. Specification: Product: RGB color LED faucet light Color: Silver Material: ABS with electroplating Power: Turbine-drive by water pressure LED emitting color: Green, Blue, Red, Purple etc. Size: 3.5 x 2.8cm Outer screw thread: M24*1mm (2.4) So the LED lights are both suitable for 22mm and 24mm water tap. please make sure the size is suitable for your water tap. Package Included: LED Faucet Head Note: Our products are just suitable for round water outlet, and if want to install correctly, the outlet should have corresponding screw threads. Check the above pictures for diagrams

Features: Brand new and high quality The current sensor chips: ACS712ELC-30A Pin 5V power supply, on-board power indicator The module can measure the positive and negative 30 amps, corresponding to the analog output 66mV/A No test current through the output voltage is VCC/2 Specifications: PCB board size: 3.1cm x 1.3cm - 1.2inch x 0.5inch Net weight: 5 g Package weight: 15 g Color: Blue+Green Package Content:

Item Description: Specifications: Color:  White Quantity:  1 pc Voltage:  AC 180V-240V Output:  Relay Load power:  200W Induction distance:  3 m - 8 m Induction angle:  120° Light intensity of illumination:  6 Lux Time extension:  30s±10s Switch Dimension： 7.45 x 3.85 x 2.8c m / 2.93 x 1.51 x 1.1":  Feature:  (1)Infrared technology based automatic motion sensor switch. (2)Automatic turn ON/OFF while detected people come or left. (3)Automatic locked

Android v4.1.1 (Jelly Bean) OS Wi-Fi Enabled 2 MP Primary Camera Digital Front Facing Camera 9.7-inch Capacitive Touchscreen About Karbonn Smart Tab 10 (Black) The Karbonn Smart Tab 10 runs on the user friendly Android 4.1 Jelly Bean operating system. It is powered by a 1.5 GHz processor, for enhanced speed and easy multitasking. The primary (rear) camera, digital secondary (front camera) and 1 GB RAM form the USP of this tablet. There are various preloaded applications for games, entertainment and social media in this Karbonn device. Design & Display Featuring a bar from factor, this Smart Tab 10 is capable of accepting multi touch input with the 10 point multi-touch screen. It has a 9.7-inch Thin Film Transistor (TFT) LCD screen, which has a resolution of x 768 pixels. This tablet boasts of p high resolution playback support. Multimedia There is a 2 megapixel primary (rear) camera in this Karbonn tablet and a digital secondary (front) camera. The Smart Tab 10 has been designed to provide users an enhanced gaming experience by virtue of its 3D G-sensor. Connectivity There are multiple connectivity options on the Karbonn Smart Tab, which are wired as well as wireless. The Smart Tab 10 features Wi-Fi that supports b/g/n standards. There is an HDMI port, which can be used to connect this tablet to compatible devices. Battery & Storage The capacity of the battery used in this Karbonn tablet is mAh, providing sufficient power back up. There is a microSD card slot that can be used for expanding the memory up to 32 GB. About Karbonn Smart Tab 10 (Black) BRAND-- Karbonn See All Karbonn Products CATEGORY-- iPads & Tablets GENERAL FEATURES Sales Package Battery, Charger, Headset, User Guide ProcessorCortex A9 Dual-Core Processor Speed1.5 GHz Tablet ColourBlack Brand Karbonn ManufacturerKarbonn PLATFORM Operating System Android 4.1 (Jelly Bean) Sensors Gravity Sensor, 3D-G Sensor DISPLAY Display Type LCD TFT Capacitive Touchscreen Other Display Features 10 Point Multi-Touch Screen, p High Resolution Playback Support Screen Size 9.7 Inches Screen Resolution x 768 Pixels CAMERA Primary Camera Yes, 2 MP Secondary Camera Yes, 0.3 MP Video Recording Yes MULTIMEDIA & ENTERTAINMENT Supported Audio FormatsMP3 Supported Video Formats MP4, 3GP, WMV, ASF, AVI, FLV, MOV, MKV, TS, TP, M2TS, VOB, DAT, PMP BUSINESS FEATURES Mail FeaturesE-mail MEMORY & STORAGE RAM 1 GB Expandable Memory Yes, 32 GB Card Slot Yes, microSD INTERNET CONNECTIVITY Wi-FiYes CONNECTIVITY Hdmi Yes USB Yes Audio Jack Yes, 3.5 mm BATTERY Battery Type mAh OTHER FEATURES YouTube, eBook Reader, Google Currents, Angry Birds Seasons, Turbo FLY 3D, Flipboard, Kingsoft Office, Economic Times, Times of India, Just Dial, Facebook

Description 100% brand new and high quality On-board ADXL345 digital output(support the I2C/SPI), low-power, compact acceleration sensor. Support 5V/3.3V voltage input, on-board RT power chip, lower pressure drop faster than the , faster load speed of response very suitable for high-noise power supply environment Common pins are leaded out, pins standard 100mil (2.54mm), convenient for the dot matrix board. Features VCC voltage module operating voltage and good power filtering; Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor, the length of the antenna 433M of about 17cm; Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source; frequency used to receive, decode and oscillation resistor should match with the transmitter. Specification PCB size::28 (mm) x14 (mm) Color:As shown SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

Description 100% brand new and high quality Main Chip: LM393, Electret condenser microphone Signal output indication Single channel signal output The output effective signal is low level with a precision potentiometer adjustable sensitivity adjustment When there is sound,output low level and the signal lights Can be used for Acoustic control light; give sound and light alarm working with Photosensitive sensor Note:The Maximum induction distance is 0.5M Specification Color:- Black or Blue board will be sent on random based on availability Working Voltage: - DC 4-6V Size: - About 32mm*17mm*15mm(length*width*height) Net weight: - 7 Grams   Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

Description Sensor Module Apply to switchboard, duplicator, washing machine, refrigerator, camera, disinfector, electronic scale, juice level gauge, gas meter and water meter, etc Specification: With fixed bolt hole for easy installation Working distance:- 1.5 M Operating voltage: - 3.3 V-5 V Output Type: - Digital switching output (0 and 1) Size: -3.2 x 1.9 x 0.7 cm Net weight: - 4Gm Color: -As shown

DESCRIPTION Capacitive Digital Touch Sensor Hand Detection Module For Arduino Features: Touch key detection IC, providing a touch key. Touch detection IC is designed to replace traditional keys with variable area. Button keys and design. Low power consumption and wide operating voltage DC and AC touch key features. Specifications: Input operating voltage: DC 2.0V - 5.5V Input with reverse polarity protection. LED Color: BLUE, connected to Output pin Idle current: Size: 15.5 x 23.5 mm Connection: Vcc, Output, GND Package included: 1 x Hand detection module We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Get high quality color night vision camera for your home at reasionable price range and ensure your home security. • High quality cosmos sensor to record HD color video even in dark • White LED range 15-20M • Video compression according need • Dual Stream supported • Weather proof. For more infoirmation Visit: https://www.secureye.com/product-cat/color-night-vision-camera/ Mobile: 9821582615

Get best Color Night Vision Camera for home and office security which provides 24x7 complete security. High Quality Cosmos Sensor Dual Stream supported Works in all weather Clear day/night recording for more information Visit: https://www.secureye.com/ Mobile: 9821582615

About this item Features •8MP primary camera with full HD recording, 5x digital zoom, auto focus, image stabilization, flash support and time shift mode •4.2-inch WXGA with x 768 pixels resolution and gesture support •BlackBerry 10 OS with 1.5GHz dual core processor, 2GB RAM with 16GB internal storage and memory expandable up to 64GB. Wireless communication technologies Bluetooth, WiFi Hotspot Accelerometer, Gyroscope, Ambient light sensor, Compass Device interface - primary Touch Screen Form factor Touchscreen Phone Weight 136 Grams Colour White Phone Talk Time 10 Hours Phone Standby Time (with data) 312 Hours Whats in the box Handset, Charger, Battery, Headset, User Manual and USB Cable

Description 100% brand new and high quality Direct digital output, omitting complex calculations, calibration is omitted Does not distinguish between ambient light Close to the visual sensitivity of the spectral characteristic A wide range of brightness can be determined with high accuracy a lux Sensors Built 16bitAD converter Specification: Color: As shown