Decoder module avr

Mobile Controlled Robot Using DTMF Decoder Module: Robosoft Labs DTMF Decoder   Decodes DTMF audio signal to 4 bit binary TTL level output with LED indication. Suitable for use with microcontroller applications. Features   ·  Decodes DTMF as 4 bit binary ·  TTL level output for direct connection to microcontrollers ·  Low power 5V DC operation ·  LED indication of outputs ·  Simple to use ·  Based on excellent IC Applications ·  Remote Control systems ·  Caller ID applications ·  FM receiver based remote control ·  Remote control using Mobile phone Specification   Operating Voltage 5 V DC Regulated power supply input Operating Current 100 mA Information Connect regulated +5V DC supply for operation of board. Outputs Q1-4 and VT are active high output at 5V level. If any LED is on means that output is at high level. VT LED blinks once a new DTMF tone is received. The binary data appears at Q1 to Q4. Details of this output is on next page.Input signal can be from an audio source like microphone amplifier, FM radio receiver, wired phone line. Please note when connecting land line phone signal, do not connect ground wire of board to phone line directly. Use a 100nF capacitor

Mini FM - USB - AUX - Mp3 Decoder Module || Steal the Deal! Mini FM - USB - AUX - Mp3 Decoder Module || Steal the Deal! Distortion ≤0.2% Separation ≥50dB Output ≥ 550mv S/N ≥ 85dB Frequency response 70HZ-15KHZ FM frequency range MHZ Bit Rate 32kbps-320kbps Operation Relative Humidity 35% Bluetooth Specification V3.0 Storage Temp 0 Deg.C-50Deg.C Ambient Temp -10Deg.C-+60Deg.C EQ Jazz, pop, classic, normal, country Remote Distance 8M USB Interface USB2.0 high  speed Storage Device USB&SD

MP3 TF USB AUX Decoder Module With FM|Screen|Multifunctional Keys| High Quality MP3 TF USB AUX Decoder Module With FM|Screen|Multifunctional Keys| High Quality Best for those who want to make there own portable Speaker System! 9% Discount Coupon - 15DEAL     Apply it at the time of Checkout... Main function:   MP3 player+FM radio Voltage: 5V FM frequency Range : 88MHz—108MHz broadcast mode:Supporting TF Card and USB disk and Aux to play music With Digital Screen Shell color: Black or Silver With LED Reminding With multifunctional keys

MP3 TF USB AUX Decoder Module With FM|Screen|Multifunctional Keys| High Quality MP3 TF USB AUX Decoder Module With FM|Screen|Multifunctional Keys| High Quality Best for those who want to make there own portable Speaker System!   Apply it at the time of Checkout... Main function:   MP3 player+FM radio Voltage: 5V FM frequency Range : 88MHz—108MHz broadcast mode:Supporting TF Card and USB disk and Aux to play music With Digital Screen Shell color: Black or Silver With LED Reminding With multifunctional keys

See our ratings Add this shop to my favorites DTMF Decoder Module with LED Indicators ₹ Availability:

Application: RF Controlled Robot Using RF Encoder and Decoder Module: Robosoft Labs RF Encoder & Decoder Interfacing board with HT12D & HT12E IC chips. Features: Easy interfacing with the RF modules, using the female headers for placing the modules. Breakout pins for connecting to the microcontroller. switch for manual Testing Status LED and switch button. Small size, high quality PCB.  Package Contents: 1 piece of RF encoder and decoder board with HT12E/HT12D IC chips. Applications: 1) RF Controlled Robot Using RF Encoder and Decoder Module: Robosoft Labs 2) Home Automation 3) Switch On/Off lights and other home appliances through with RF

Description Package Includes: 1 Piece new  KY-040 Rotary Decoder Encoder Module For Arduino AVR PIC It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  KY-040 Rotary Decoder Encoder Module For Arduino AVR PIC KG189 It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  KY-040 Rotary Decoder Encoder Module For Arduino AVR PIC KG189 It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

1 Channel Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino This is a  1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).   Features: 1 -Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250 V AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size R elay status indicator LED (red) Weight ： 10 0 g   Module interface specifications (3 wire)   1. External 12V 2. GND external GND 3. 1N interchange relay control interface (Control by 3.3V or 5V Logic)   Package included:   1 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

This RF modulecomprises of an RF Transmitterand an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 434 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. The transmission occurs at the rate of 1Kbps - 10Kbps.The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter. The RF module is often used alongwith a pair of encoder/decoder. The encoder is used for encoding parallel data for transmission feed while reception is decoded by a decoder. HT12E-HT12D, HT640-HT648, etc. are some commonly used encoder/decoder pair ICs.

Description: The TX is an ASK transmitter module.The TX isdesigned specifically for remote-control, wireless mouseand car alarm system operating at MHz.The RX is a miniature receiver module that receives On-offkeyed (OOK)modulation signal and demodulated to digital signal for the next decoder stage.The RX is designed specifically for remote-control and wireless security receiver operating at Mhz. UART TTL o/p - Baud Rate - . Features: Input Power supply - 5 Volts Compatible for Both RF Mhz Interface upto 8 Bit Data. UART TTL o/p - Baud Rate - Package Includes with RF Tx Rx. Indicating LED's. High quality PCB FR4 Grade with FPT Certified.     Package Contains: RF TX RX with 8 Bit Encoder and Decoder. Billing: Xbee Development Board(RDL/GRS//V1.0) VAT Bill is included. Rules and Regulations: All Items

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 10 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc....   ***(Work with All Analog/Digital circuits with signal from 3V to 15V) *** Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 3.3v and 5v micro controller  (Check Other Listings  for  1.8V-5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 3V to 16V(1.5V to 16V for 1.8V logic) with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 3.3V and 5V micro controllers/Digital (1.8V Version also available Please Check My other Listings).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister