Enc28j60 ethernet interface

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

This is a great module if you want to add an internet connection to your microcontroller projects. The board is based off of the popular ENC28J60 IC and handles most Ethernet network protocol requirements. Ethernet LAN Module for PIC/Atmel AVR/Arm ENC28J60-I/SO Ethernet chip module Network Interface: HanRun HRA Supply Voltage: 3.3 V Size: 50mm x 33mm x 18mm

Description The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming in Arduino ). An SD card library is not yet included in the standard Arduino distribution. Arduino communicates with both the W and SD card using the SPI bus (through the ICSP header). This is on digital pins , and 13 on the Duemilanove and pins , and 52 on the Mega. On both boards, pin 10 is used to select the W and pin 4 for the SD card. These pins cannot be used for general i/o. On the Mega, the hardware SS pin, 53, is not used to select either the W or the SD card, but it must be kept as an output or the SPI interface won't work. Note that because the W and SD card share the SPI bus, only one can be active at a time. If you are using both peripherals in your program, this should be taken care of by the corresponding libraries. If you're not using one of the peripherals in your program, however, you'll need to explicitly deselect it. To do this with the SD card, set pin 4 as an output and write a high to it. For the W, set digital pin 10 as a high output. The shield provides a standard RJ45 ethernet jack. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description: This module contains what you need to enable ethernet on your next microcontroller project. This board utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20 MHz. It includes a ENC28J60 ethernet controller, an RJ45 socket with link/activity lights and integrated transformer. This ethernet module enables you to connect a particular Embedded device (equipped with SPI support) on to a network. By using this Ethernet module (along with a microcontroller running a small TCP/IP stack) applications like Embedded Web server can be easily developed. Use this module to enable Ethernet interface for your product. It works with any microcontroller operating at 3.3V or 5V. This module works at 5V and is compatible with 5V interface lines. Use SPI process to interface with it. Host web server, ping the module or add it to home automation via internet. Heart of this module is ENC28J60 Ethernet controller from Microchip. Use of RJ45 with Integrated transformer has made it possible to reduce the size of board. This board is assembled with all components as shown in the pictures below. The circuit board includes all required components for the ethernet controller, plus a 3.3V Voltage Regulator and a RJ-45 jack with integrated transformer and built-in Link and Activity LEDs for connection to an Ethernet Local Area Network. Features: Microchip ENC28J60 Ethernet Chip supporting Microchip s TCP/IP protocol stack, with IPv4, UDP, TCP, DHCP, ICMP, FTP, and HTTP support. Compatible with all controllers having an SPI interface, SPI interface takes only few pins to add Ethernet interface to your microcontroller project Suitable for 3.3V Interface LAN connector with build in transformer Link and Activity LED's on Ethernet connector 8 pin standard interface connector with spacing of mm) row pins IEEE Compatible with Integrated MAC and 10Base-T PHY Fully Compatible with Base-T Networks Supports One 10Base-T Port with Automatic Polarity Detection and Correction Supports Full and Half-Duplex modes Programmable Automatic Retransmit on Collision Programmable Padding and CRC Generation Programmable SPI Interface with Clock Speeds Up to 20 MHz Application: Remote control and monitoring. Data capture and logging Industrial Automation Building Automation Appliance remote management Robotics Microcontroller Research and Development TCP/IP Research and Development Specification: Operating Voltage: +3.3V DC Current Consumption: 180mA average Pin Spacing: mm) Board Size: 68x22mm We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

HLK-RM04 Serial Uart to Ethernet Switch WIFI Module with antenna and HLK-RM04 UART to WIFI  Module Test Base Board   Description Product features. 
 1). UART to WIFI Wireless Module ， UART to Ethernet Module ， Ethernet to WIFI Module ， UART server module ， Make your Serial Device connected to the Internet easily. Double Data Rate All transparently. Guarantee the highest limit of Usability and Compatibility. 
 2). The module integrated m adaptive Ethernet interface.The highest baud rate up to Kbps of the serial communication.and the highest rate of TTL serial port is 500KBPS. 
 3). Each module

Website: www.serversrent.com Mobile: / 080 Hi All We have HP 10GB NETWORK ETHERNET CARD PCI-E 10 Gigabit Ethernet Adapters Network Interface Cards & Converged Network Adapters ATTO FastFrame is an easy-to-understand, comprehensive portfolio of products designed for flexibility and engineered for performance. Quad-, dual-, and single-port Converged Network Adapters and SFP+ Network Interface Cards all include high-quality SFPs, and may also be used with Direct Attach Copper cabling. Single- and dual-port 10GBASE-T cards are built on the industry's first single-chip, low-power 10GBASE-T controller by Intel. All FastFrame adapters include iSCSI support at no additional cost, and all have drivers for Windows servers and workstations, multiple Linux distributions, and Mac OS X. FastFrame enables connectivity solutions ranging from high-performance access to file servers, through connection to industry-leading NAS systems, to switched fully-converged FCoE topologies, without expensive upgrades, add-ons, or hidden costs. NICs are backward compatible (via auto-negotiation) for phased upgrade to 10Gb Ethernet. CNAs, built with ATTO's industry leading Fibre Channel stack, simultaneously support TCP/IP, iSCSI, and FCoE, which may be configured per-port. Data Center Bridging (DCB) provides traffic prioritization required for high quality of service for iSCSI, and for running FCoE converged SANs. For more details, contact us: Mobile: /080- Website: www.serversrent.com No 659, VB Layout, K.R.Puram New Extension, Bangalore-36

Accell (J141B-003B) USB 3.0 to Gigabit Ethernet (RJ45) Adapter; Retail Pack. Easily add an Ethernet Network Interface to a USB Enabled Notebook Ultra book or Desktop Computer. The Accell USB 3.0 (Type-A) to Gigabit Ethernet adapter adds a Mbps Gigabit Ethernet connection to a computer s USB 3.0 port. It easily converts a computer s USB port into a Base-T Ethernet port. It can also improve the connectivity speed of your computer over its existing 100Mbps Fast Ethernet port or when using a Wi-Fi wireless network

Upgrade your data and network access all at once. SuperSpeed up. Adopting the latest USB 3.0 technology, the USB 3.0 interface gives you access to SuperSpeed data transfer rates of up to 5Gbps. Here at Anker®, we value your time. Instant expansion. With quick installation, this Anker USB 3.0 PCI-E Card offers a simple solution for connecting to 3 USB 3.0 devices from your standard desktop PC. Gigabit ethernet port. A gigabit ethernet port provides access to local area networks (LAN) with reliable Mbps speeds. System Requirements Windows / Vista / XP. Notes: 1. The PCI-E card is powered by a 4-pin power connector. Please confirm that your computer's motherboard is equipped with a 4-pin power connector plug before purchasing. 2. To achieve maximum USB 3.0 performance, peripherals, cables, and software should all support USB 3.0. 3. To achieve maximum LAN speeds with this product, other computer peripherals should also support 1Gbit ethernet speeds. Product Features USB 3.0 ports (adopting VL805 chip) with transfer rates of up to 5Gbps, backward compatible with USB gigabit ethernet port (RTS chip) gives access to superfast network speeds, compatible with Mbps ethernet. 4-pin connector to power USB devices from your PC's power supply. Supports hot swapping. The PCI-E port only supports PCI-E X1/X16 slots. Package contents: Anker® 3-Port USB 3.0 and Gigabit Ethernet Port PCI-E Card, 7.9in 4-Pin to SATA cable (including connector length), driver CD, instruction manual. Free lifetime technical support and 18-month manufacturer's warranty. Product Specifications USB Type SuperSpeed USB 3.0 PCI-E type Support PCI-E X1 and PCI-E X16 Compatible Windows / Vista / XP

Upgrade your data and network access all at once. SuperSpeed up. Adopting the latest USB 3.0 technology, the USB 3.0 interface gives you access to SuperSpeed data transfer rates of up to 5Gbps. Here at Anker®, we value your time. Instant expansion. With quick installation, this Anker USB 3.0 PCI-E Card offers a simple solution for connecting to 3 USB 3.0 devices from your standard desktop PC. Gigabit ethernet port. A gigabit ethernet port provides access to local area networks (LAN) with reliable 10/100/1000 Mbps speeds. System Requirements Windows 8.1 / 8 / 7 / Vista / XP. Notes: 1. The PCI-E card is powered by a 4-pin power connector. Please confirm that your computer's motherboard is equipped with a 4-pin power connector plug before purchasing. 2. To achieve maximum USB 3.0 performance, peripherals, cables, and software should all support USB 3.0. 3. To achieve maximum LAN speeds with this product, other computer peripherals should also support 1Gbit ethernet speeds. Product Features USB 3.0 ports (adopting VL805 chip) with transfer rates of up to 5Gbps, backward compatible with USB 2.0 / 1.1. 1 gigabit ethernet port (RTS8153 chip) gives access to superfast network speeds, compatible with 10/100/1000 Mbps ethernet. 4-pin connector to power USB devices from your PC's power supply. Supports hot swapping. The PCI-E port only supports PCI-E X1/X16 slots. Package contents: Anker® 3-Port USB 3.0 and Gigabit Ethernet Port PCI-E Card, 7.9in 4-Pin to SATA cable (including connector length), driver CD, instruction manual. Free lifetime technical support and 18-month manufacturer's warranty. Product Specifications USB Type SuperSpeed USB 3.0 PCI-E type Support PCI-E X1 and PCI-E X16 Compatible Windows 8.1 / 8 / 7 / Vista / XP

D-Link DSL-U ADSL2+ Ethernet / USB Combo Router WORKS WITH MTNL/BSNL/AIRTEL.   PRODUCT CONDITION:USED. EXCELLENT WORKING CONDITION. PRODUCT INCLUDES: DSL U ORIGINAL POWER ADAPTER ETHERNET CABLE This ADSL Combo Modem Router connects your computer to the Internet using an integrated high-speed ADSL2+ interface. It provides a NAT firewall and SPI to protect your computer from Internet attacks, and QoS functions to prioritize traffic for smooth online gaming, streaming multimedia and voice communication over the Internet, as well as downloading large files, photos, music and video. When needed, multiple computers at home and the office can also share the high-speed Internet line using the router’s built-in DHCP server/NAT functions and an externally connected Ethernet Switch. HIGH-SPEED ADSL2+ INTERNET CONNECTION. Latest ADSL2+ standard provides Internet transmission of up to 24 Mbps downstream,up to 2 Mbps upstream. ALL-IN-ONE SINGLE BOX SOLUTION. Built-in ADSL modem, Ethernet and USB ports, QoS and Firewall protection, all

PRODUCT DESCRIPTION It is a combination M Ethernet adapter.As a fully integrated USB rolution,the new USB Ethernet adapter allows users to easily connect to the Ethernet network with a complete out of the box,Plug and Play solution FEATURES  ü       Compatible with Mac / Windows / Android ü       Self-adapting Mbps network ü        Support 10Mbps and 100Mbps N-way auto-negotiation operation ü        Compliant with IEEE Based-T) and u (100Based-TX) standards. ü       Support both full-duplex and half-duplex operations. ü       Support suspend /resume detection logic ü      Powered by USB port, no external power adapter required. ü      Compliant with Windows 98ME / / XP / Vista, Windows 7, Windows 8 Mac OS X , Linux 2.4 9.Compliant with USB interface version ** IMPORTANT NOTE FOR MAC USERS: Works upto Mac OS , driver not available for 10.9 yet ** Please follow the below instructions if you Mac OS is OS X lion onwards: Please download this file firstly

Mini HDMI to HDMI Cable with Ethernet Type C to Type A Support 3D & 4K for Digital Cameras/Camcorders, MP3 players, HDTVs and other HDMI Devices, 3 ft length Brand New 100% Compatible & High Quality Description: ·         Works with HDTVs, digital cameras/camcorders, MP3 players, and other HDMI devices ·         Supports Ethernet, 3D, and Audio Return ·         Gold-plated, corrosion-resistant connectors that deliver optimal signal transfer with lower distortion at the point of contact ·         With a durable, black, PVC outer layer and triple shielding, which defends against outside interference, helping to maintain the integrity and purity of the digital signal  HDMI cable with AUDIO RETURN - combines both audio and video into one cable Ethernet Channel for Sharing Internet between HDMI Devices Compatible with all HDMI Devices  HDMI combines both audio and video into one convenient cable, so it's all you need to connect your HDTV to your A/V receiver, Blu-Ray player, Xbox 360, PlayStation 3, HD Cable Box, Personal Computer or any other (High Definition Multimedia Interface) device with an HDMI output.   Compatibility - Supports 3D Content - Guaranteed 4Kx2K, p, p, i, 720p, 480p, and 480i Resolutions - Supports Audio Return Channel - Supports Highest Refresh Rates Available - Supports Transfer Rates of Up to 340 MHz or 10.2gbps - Supports True HD Dolby 7.1 and DTS-HD Master Audio - HDCP Compliant   Quality Construction - Full Metal Shielding Within Connectors for Durability and Interference Protection - Shielding Throughout Cable - HDMI connectors are 24K Gold plated. --------------------------------------------------------------------------------------------------------------------------------------- Shipping (Very Important) Please give 48 Hours to dispatch after receiving payment. We Ship through Blue Dart & DTDC Couriers. Buyer has to pay "OCTROI OR ANY HANDLING CHARGES" if applicable.   Payment Payment is accepted by Paisa Pay. Paisa pay is the safest mode of Payment. Buyer has to pay "OCTROI OR ANY HANDLING CHARGES" if applicable   Returns & Refunds   We have 100% satisfactory guarantee, if you are not satisfied with your purchase, or if by any chance you do receive a defective item please contact us and we will help to resolve your problem. Please contact us within 14 days of receipt to return it for refund or exchange. Non-defective item returns will be accepted within 14-days.There will be 15% restocking fees. Buyer is responsible for return shipping costs.   Sourcing  If you need other items or parts that cannot be found on our store, please let us know and we can do the sourcing for you. If you need more quantity than we offered

Cadyce USB to Ethernet Adapter-CA-U2E Features: - Compliant with USB 2.0 and USB 1.1 Specifications - Compliant with IEEE Base-T) and u(100Base-TX) standards - Supports both full duplex and half duplex operation - Supports suspend mode and remote wakeup via link-up and magic packet - Powered by USB port only. It requires no external power - Equipped with diagnostic LED&rsquo - Plug and Play Installation  Technical Specification: Items Description Data Transfer Rate Ethernet: 10Mbps/20Mbps (Half/Full Duplex) Fast Ethernet: 100Mbps/200Mbps (Half/Full Duplex) Function Connects desktop or laptop PC to a mbps network. Network Standard USB IEEE Base-T IEEE u 100Base-TX Network Interface Female RJ45 Jack Power Bus Powered. Power Consumption 850 mW Supported OS Windows , XP, Vista, windows 7/8, Mac OS X 10.x, Also supports Linux 2.6.9 & Linux kernel LEDs 100Mbps, Link RAM Embedded 20KB SRAM for RX packet buffering and 20KB SRAM for TX packet buffering Management suspend mode, hibernation mode Operating temperature 0 to 70 degrees Accessories Driver CD, Quick Installation Guide.

Buy (USB To LAN MBPS Ethernet Adaptor). Features Brand New. Best quality Switch 10Mbps or 100Mbps network automatically. Half/full duplex Mbps operation. Compliant to USB interface version Integrated Fast Ethernet Mac, physical clip and transceiver

Monoprice 3ft 30AWG High Speed HDMI Cable With Ethernet - HDMI Mini Connector to HDMI Connector - Black. These cables are for connecting PORTABLE High Definition devices such as camcorders. If you are trying to connect your stationary set top source devices such as cable boxes or disk players please try. PID# . HDMI Mini Connectors are the new high definition standard for connecting HDMI equipped portable devices such as high definition camcorders. This cable will allow you to connect your portable device to the standard HDMI Connector found on most televisions and A V receivers. These cable comply with the latest HDMI requirements including the optional HDMI Ethernet Channel feature. HDMI the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC