Ethernet lan module enc28j60

This is a great module if you want to add an internet connection to your microcontroller projects. The board is based off of the popular ENC28J60 IC and handles most Ethernet network protocol requirements. Ethernet LAN Module for PIC/Atmel AVR/Arm ENC28J60-I/SO Ethernet chip module Network Interface: HanRun HRA Supply Voltage: 3.3 V Size: 50mm x 33mm x 18mm

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Description: This module contains what you need to enable ethernet on your next microcontroller project. This board utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20 MHz. It includes a ENC28J60 ethernet controller, an RJ45 socket with link/activity lights and integrated transformer. This ethernet module enables you to connect a particular Embedded device (equipped with SPI support) on to a network. By using this Ethernet module (along with a microcontroller running a small TCP/IP stack) applications like Embedded Web server can be easily developed. Use this module to enable Ethernet interface for your product. It works with any microcontroller operating at 3.3V or 5V. This module works at 5V and is compatible with 5V interface lines. Use SPI process to interface with it. Host web server, ping the module or add it to home automation via internet. Heart of this module is ENC28J60 Ethernet controller from Microchip. Use of RJ45 with Integrated transformer has made it possible to reduce the size of board. This board is assembled with all components as shown in the pictures below. The circuit board includes all required components for the ethernet controller, plus a 3.3V Voltage Regulator and a RJ-45 jack with integrated transformer and built-in Link and Activity LEDs for connection to an Ethernet Local Area Network. Features: Microchip ENC28J60 Ethernet Chip supporting Microchip s TCP/IP protocol stack, with IPv4, UDP, TCP, DHCP, ICMP, FTP, and HTTP support. Compatible with all controllers having an SPI interface, SPI interface takes only few pins to add Ethernet interface to your microcontroller project Suitable for 3.3V Interface LAN connector with build in transformer Link and Activity LED's on Ethernet connector 8 pin standard interface connector with spacing of mm) row pins IEEE Compatible with Integrated MAC and 10Base-T PHY Fully Compatible with Base-T Networks Supports One 10Base-T Port with Automatic Polarity Detection and Correction Supports Full and Half-Duplex modes Programmable Automatic Retransmit on Collision Programmable Padding and CRC Generation Programmable SPI Interface with Clock Speeds Up to 20 MHz Application: Remote control and monitoring. Data capture and logging Industrial Automation Building Automation Appliance remote management Robotics Microcontroller Research and Development TCP/IP Research and Development Specification: Operating Voltage: +3.3V DC Current Consumption: 180mA average Pin Spacing: mm) Board Size: 68x22mm We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Contact Us on 7566446343 for Any Inquiry or Support for Mining Rig Setups.  Specifications:-  Unique Feature ASRock Super Alloy - Sapphire Black PCB - High Density Glass Fabric PCB ASRock Full Spike Protection  (for all USB, Audio, LAN Ports) ASRock Live Update & APP Shop CPU - Supports 7 th  and 6 th  Generation Intel ®  Core™ i7/i5/i3/Pentium ® /Celeron ®  Processors (Socket 1151) - Supports CPU up to 91W - Digi Power design - 8 Power Phase design - Supports Intel ®  Turbo Boost 2.0 Technology Chipset - Intel ®  H110 Memory - Dual Channel DDR4 Memory Technology - 2 x DDR4 DIMM Slots - Supports DDR4 2400/2133 non-ECC, un-buffered memory * - Supports ECC UDIMM memory modules (operate in non-ECC mode) - Max. capacity of system memory: 32GB * - Supports Intel ®  Extreme Memory Profile (XMP) 2.0 - 15μ Gold Contact in DIMM Slots * 7th Gen Intel ®  CPU supports DDR4 up to 2400; 6 th  Gen Intel ®  CPU supports DDR4 up to 2133. * * Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows ®  32-bit OS. For Windows ®  64-bit OS with 64-bit CPU, there is no such limitation. BIOS - 64Mb AMI UEFI Legal BIOS with multilingual GUI support - ACPI 5.0 Compliant wake up events - SMBIOS 2.7 Support - CPU, DRAM, PCH 1.05V Voltage multi-adjustment Graphics - Supports Intel ®  HD Graphics Built-in Visuals: Intel ®  Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full HW Encode1, Intel ®  InTru™ 3D, Intel ®  Clear Video HD Technology, Intel ®  Insider™, Intel ®  HD Graphics - Gen9 LP, DX11.3, DX12 - HWA Encode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For 7 th  Gen Intel ®  CPU) - HWA Encode/Decode: VP8, HEVC 8b; GPU/SW Encode/Decode: VP9, HEVC 10b (For 6 th  Gen Intel ®  CPU) - Max. shared memory 1024MB * * - Supports DVI-D with max. resolution up to 1920x1200 @ 60Hz - Supports Accelerated Media Codecs: HEVC, VP8, VP9 - Supports HDCP with DVI-D Port - Supports Full HD 1080p Blu-ray (BD) playback with DVI-D Port * Intel ®  HD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated. * * The size of maximum shared memory may vary from different operating systems. Audio - 7.1 CH HD Audio (Realtek ALC887 Audio Codec) * - Supports Surge Protection - ELNA Audio Caps * To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. LAN - Gigabit LAN 10/100/1000 Mb/s - Giga PHY Intel ®  I219V - Supports Wake-On-LAN (Supported on Black PCIe Slots only) - Supports Lightning/ESD Protection - Supports Energy Efficient Ethernet 802.3az - Supports PXE Slots - 1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode) * - 12 x PCI Express 2.0 x1 Slots * Supports NVMe SSD as boot disk Storage - 4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot Plug * - 1 x M.2 Socket, supports M Key type 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module * If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 will be disabled. Connector - 1 x Print Port Header - 1 x COM Port Header - 1 x TPM Header - 1 x Chassis Intrusion and Speaker Header - 1 x CPU Fan Connector (4-pin) * - 2 x Chassis Fan Connectors (4-pin) - 1 x 24 pin ATX Power Connector - 1 x 8 pin 12V Power Connector - 2 x PCIe Power Connectors-1 x SATA Power Connector - 1 x Front Panel Audio Connector - 1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports ESD Protection) - 1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports) (Supports ESD Protection) * The CPU Fan Connector supports the CPU fan of maximum 1A (12W) fan power. Rear Panel I/O - 1 x PS/2 Mouse Port - 1 x PS/2 Keyboard Port - 1 x DVI-D Port - 4 x USB 2.0 Ports (Supports ESD Protection) - 2 x USB 3.1 Gen1 Ports (Supports ESD Protection) - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jacks: Line in / Front Speaker / Microphone Software and UEFI Software - ASRock APP Charger - ASRock XFast LAN UEFI - ASRock Instant Flash * These utilities can be downloaded from ASRock Live Update & APP Shop. Support CD - Drivers, Utilities, AntiVirus Software (Trial Version), Google Chrome Browser and Toolbar Accessories - Quick Installation Guide, Support CD, I/O Shield - 2 x SATA Data Cables - 1 x Screw for M.2 Socket Hardware Monitor - CPU/Chassis temperature sensing - CPU/Chassis Fan Tachometer - CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by CPU temperature) - CPU/Chassis Fan multi-speed control - CASE OPEN detection - Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore Form Factor - ATX Form Factor: 12.0-in x 8.2-in, 30.5 cm x 20.8 cm - Solid Capacitor design OS - Microsoft ®  Windows ®  10 64-bit (For 7 th  Gen Intel ®  CPU) - Microsoft ®  Windows ®  10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit (For 6 th  Gen Intel ®  CPU) * To install Windows ®  7 OS, a modified installation disk with xHCI drivers packed into the ISO file is required. Please check our User Manual for more detailed instructions. Certifications - FCC, CE Crypto Mining This motherboard is specifically designed for mining, the revolutionary digital crypto-currency that may be used anywhere in the world. The abundant onboard PCIe slots guarantee fast Crypto mining, while the additional power connectors provide advanced system stability while mining. more 2oz Copper It comes with 2 ounces copper inner layers, using only carefully selected copper materials for PCB layers, delivering lower temperature and higher energy efficiency for better stability. Intel ®  LAN Intel ®  LAN provides the best throughput performance, lower CPU utilization, enhanced stability and is able to deliver ultimate network experience to users! Sapphire Black PCB Pure black PCB appearance. The new Sapphire Black PCB represents rock-solid quality and gives the motherboard a more mysterious touch. High Density Glass Fabric PCB High Density Glass Fabric PCB design that reduces the gaps between the PCB layers to protect the motherboard against electrical shorts caused by humidity. Digi Power Unlike traditional motherboards that use analog power, this motherboard uses a next generation digital PWM (Pulse-Width Modulation) design, which provides CPU Vcore voltage more efficiently and smoothly, so that the stability and lifespan of the motherboard is greatly enhanced. Power On / Reset Button Power On & Off system with onboard button is a must for open frame mining. Solid Capacitor Design ASRock applied solid capacitors on this motherboard. With these solid caps, this motherboard is allowed to perform more stably and ensure longer lifetime. ELNA Audio Caps Who says high quality audio is only available on high-end motherboards? ASRock applied ELNA audio capacitors on mainstream and entry-level motherboards! Compared with traditional solid caps, the leakage current of ELNA audio caps is merely 3uA. This is the key to reduce noise level significantly and satisfy even the pickiest audiophiles. Live Update & APP Shop ASRock Live Update & APP Shop is designed for your convenience. We provide various apps and support software for users to download. You can also easily optimize your system and keep your motherboard up to date with ASRock Live Update & APP Shop. more Full Spike Protection Some sensitive digital components on the motherboard are vulnerable to power surges, the excessive current may cause your system to malfunction immediately. ASRock Full Spike Protection includes various technologies to prevent your motherboard’s components from being damaged by these unexpected voltage spikes.

Digisol DG-WRMbps Broadband Repeater WiFi Wireless Router Description DIGISOL  DG-WRN is a 300Mbps Wireless Universal Repeater which can easily extend the wireless range of your wireless network. DG-WRN enhances Wi-Fi range and improves the signal quality of the Wi-Fi network. Integrated power adapter and a compact design make it easy for plugging the device directly into an electrical outlet & reduces the clutter of cables. DG-WRN supports latest IEEEn standard and is backward compatible with IEEEb/g standard. With wireless speed up to 300Mbps, users can download, share and experience uninterrupted multimedia within the LAN. Extend Wireless range using Universal Repeater Wall Mount & Compact Design Wireless Speed up to 300Mbps Supports Access Point and Wireless Client mode Robust WLAN Security Toggle switch to select the operational mode Signal strength LED indicator Integrated Internal Antenna & Power Adapter WPS and Reset button Hardware specifications:  Antenna: Internal antenna (2T2R).  One Mbps UTP Port (Auto MDI/MDI-X)for LAN  One WPS/Reset push button  Flash: 2MB  SDRAM: 16MB Frequency band:  GHz (Industrial Scientific Medical Band) Standard compliance:  IEEE BASE-T Ethernet  IEEE u 100BASE-TX Fast Ethernet  IEEEb  IEEEg  IEEEn  RADIUS (IEEEx) Data rate:  IEEEb: Mbps  IEEEg: Mbps  IEEEn (20MHz): MCS0-15, up to144 Mbps  IEEEn (40MHz): MCS0-15, up to300Mbps Output power:  IEEEb: dBm  IEEEg: dBm  IEEEn (20MHz): dBm  IEEEn (40MHz): dBm Receiver sensitivity:  IEEEb @ 11Mbps: -85 ± 2dbm  IEEEg @ 54Mbps: -70 ± 2dbm  IEEEn (20MHz) @ MCSdbm  IEEEn (40MHz) @ MCSdbm Wireless Modes:  Universal Repeater  Access Point  Wireless Client Wireless Security:  WEP  WPA  WPA2  IEEEx Power:  5V, 1A Integrated Power Module Inside Environmental Specifications  Operating temperature: °F (0~40°C)  Operating humidity: % (Non-Condensing)  Storage temperature: -°F (-°C)  Storage Humidity: Max. 95% (Non-Condensing) Certification:  FCC part 15 Class B  CE Warrant  Digicare lifetime warranty

CISCO ROUTER, 256MB RAM, 64MB FLASH  IN PERFECT WORKING CONDITIONS Cisco Series Features Configuration CISCO Cisco integrated services router with two Gigabit Ethernet fixed LAN ports, one Small Form-Factor Pluggable (SFP) slot, two enhanced network modules (NMEs), four high-speed WAN interface cards (HWICs), two Advanced Integration Module (AIM) slots, four PVDM slots, Cisco IP Base software, and AC power